SN74LVC2G34DCK
Texas InstrumentsExtended
-40℃~+85℃ 1 1.65V~5.5V 10uA 2 32mA 32mA 4.1ns@3.3V,50pF 74LVC Unidirectional SC-70-6 Buffers, Drivers, Receivers, Transceivers ROHS
- Part id
- ti/SN74LVC2G34DCK
- Category
- Buffers, Drivers, Receivers, Transceivers
- Package
- SC-70-6
- Pins
- 6
- In stock
- 26,764 at JLCPCB (C14461)
Overview
The SN74LVC2G34DCK is a buffers, Drivers, Receivers, Transceiver made by Texas Instruments in a SC-70-6 package with 6 pins. -40℃~+85℃ 1 1.65V~5.5V 10uA 2 32mA 32mA 4.1ns@3.3V,50pF 74LVC Unidirectional SC-70-6 Buffers, Drivers, Receivers, Transceivers ROHS.
PCBKit's library has its KiCad symbol (74xGxx:74LVC2G34, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-363_SC-70-6, from KiCad's library), ready for a KiCad board. 26,764 are in stock at JLCPCB (part C14461).
Symbol
Footprint
From the datasheet
9- Supply, least
- 1.65 V · VCC, recommended operating min · p. 4
- Supply, most
- 5.5 V · VCC, recommended operating max · p. 4
- Supply, absolute maximum
- 6.5 V · VCC, absolute max · p. 3
- Works from
- -40 °C · Operating free-air min, DCK package · p. 4
- Works up to
- 125 °C · Operating free-air max, DCK package · p. 4
- Junction, hottest
- 150 °C · Junction temperature absolute max · p. 3
- Takes working
- 10 µA · VCC supply current max, inputs at 5.5 V or GND, no output load · p. 5
- A pin gives at most
- 50 mA · Continuous output current absolute max, source or sink · p. 3
- Junction to air (DCK (SC70))
- 259 K/W · Junction-to-ambient thermal resistance · p. 4
What it is and has
6- Function
- Dual buffer gate · p. 1
- Input tolerance
- 5.5 V · p. 1
- Output drive
- ±24 mA at 3.3 V · p. 1
- Propagation delay
- Maximum 4.1 ns at 3.3 V · p. 1
- Package
- SC70 (6), 2.00 mm × 1.25 mm nominal body · p. 1
- Latch-up performance
- Exceeds 100 mA per JESD 78, Class II · p. 1
Around it
2- cap 0.1-μF
- between VCC and GND; Recommended bypass capacitor for this single-supply device; install as close to the power pin as possible. · p. 10
- cap 1-μF
- between VCC and GND; Commonly used in parallel with the 0.1-uF bypass capacitor; install close to the power pin. · p. 10
Specifications
63| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage VCC | Over operating free-air temperature range | min -0.5 · max 6.5 V | 3 |
| Input voltage VI | Over operating free-air temperature range | min -0.5 · max 6.5 V | 3 |
| Voltage applied to any output in the high-impedance or power-off state VO | Over operating free-air temperature range | min -0.5 · max 6.5 V | 3 |
| Voltage applied to any output in the high or low state VO | Maximum = VCC + 0.5 V | min -0.5 V | 3 |
| Input clamp current IIK | VI < 0 | max -50 mA | 3 |
| Output clamp current IOK | VO < 0 | max -50 mA | 3 |
| Continuous output current IO | Rating is ±50 mA | max 50 mA | 3 |
| Continuous current through VCC or GND | Rating is ±100 mA | max 100 mA | 3 |
| Junction temperature TJ | max 150 °C | 3 | |
| Storage temperature Tstg | min -65 · max 150 °C | 3 | |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; listed withstand value | max 2500 V | 4 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101, all pins; listed withstand value | max 1500 V | 4 |
| Supply voltage VCC | Operating | min 1.65 · max 5.5 V | 4 |
| Supply voltage VCC | Data retention only | min 1.5 V | 4 |
| High-level input voltage VIH | VCC = 2.3 V to 2.7 V | min 1.7 V | 4 |
| High-level input voltage VIH | VCC = 3 V to 3.6 V | min 2 V | 4 |
| Low-level input voltage VIL | VCC = 2.3 V to 2.7 V | max 0.7 V | 4 |
| Low-level input voltage VIL | VCC = 3 V to 3.6 V | max 0.8 V | 4 |
| Input voltage VI | min 0 · max 5.5 V | 4 | |
| Output voltage VO | Maximum = VCC | min 0 V | 4 |
| High-level output current IOH | VCC = 1.65 V | max -4 mA | 4 |
| High-level output current IOH | VCC = 2.3 V | max -8 mA | 4 |
| High-level output current IOH | VCC = 3 V | max -16 mA | 4 |
| High-level output current IOH | VCC = 3 V | max -24 mA | 4 |
| High-level output current IOH | VCC = 4.5 V | max -32 mA | 4 |
| Low-level output current IOL | VCC = 1.65 V | max 4 mA | 4 |
| Low-level output current IOL | VCC = 2.3 V | max 8 mA | 4 |
| Low-level output current IOL | VCC = 3 V | max 16 mA | 4 |
| Low-level output current IOL | VCC = 3 V | max 24 mA | 4 |
| Low-level output current IOL | VCC = 4.5 V | max 32 mA | 4 |
| Input transition rise or fall rate Δt/Δv | VCC = 1.8 V ± 0.15 V, 2.5 V ± 0.2 V | max 20 ns/V | 4 |
| Input transition rise or fall rate Δt/Δv | VCC = 3.3 V ± 0.3 V | max 10 ns/V | 4 |
| Input transition rise or fall rate Δt/Δv | VCC = 5 V ± 0.5 V | max 5 ns/V | 4 |
| Operating free-air temperature TA | DCK Package | min -40 · max 125 °C | 4 |
| Junction-to-ambient thermal resistance RθJA | DCK (SC70), 6 PINS | typ 259 °C/W | 4 |
| VOH VOH | IOH = –4 mA; VCC = 1.65 V | min 1.2 V | 5 |
| VOH VOH | IOH = –8 mA; VCC = 2.3 V | min 1.9 V | 5 |
| VOH VOH | IOH = –16 mA; VCC = 3 V | min 2.4 V | 5 |
| VOH VOH | IOH = –24 mA; VCC = 3 V | min 2.3 V | 5 |
| VOH VOH | IOH = –32 mA; VCC = 4.5 V | min 3.8 V | 5 |
| VOL VOL | IOL = 100 uA; VCC = 1.65 V to 5.5 V | max 0.1 V | 5 |
| VOL VOL | IOL = 4 mA; VCC = 1.65 V | max 0.45 V | 5 |
| VOL VOL | IOL = 8 mA; VCC = 2.3 V | max 0.3 V | 5 |
| VOL VOL | IOL = 16 mA; VCC = 3 V | max 0.4 V | 5 |
| VOL VOL | IOL = 24 mA; VCC = 3 V | max 0.55 V | 5 |
| VOL VOL | IOL = 32 mA; VCC = 4.5 V | max 0.55 V | 5 |
| A inputs II | VI = 5.5 V or GND; VCC = 0 to 5.5 V; maximum magnitude ±5 uA | max 5 uA | 5 |
| Ioff Ioff | VI or VO = 5.5 V; VCC = 0; maximum magnitude ±10 uA | max 10 uA | 5 |
| ICC ICC | VI = 5.5 V or GND, IO = 0; VCC = 1.65 V to 5.5 V | max 10 uA | 5 |
| ΔICC ΔICC | One input at VCC – 0.6 V, Other inputs at VCC or GND; VCC = 3 V to 5.5 V | max 500 uA | 5 |
| Ci Ci | VI = VCC or GND; VCC = 3.3 V; TA = 25°C | typ 3.5 pF | 5 |
| tpd tpd | A to Y; TA = –40°C to 85°C; VCC = 1.8 V ± 0.15 V | min 3.2 · max 8.6 ns | 5 |
| tpd tpd | A to Y; TA = –40°C to 85°C; VCC = 2.5 V ± 0.2 V | min 1.5 · max 4.4 ns | 5 |
| tpd tpd | A to Y; TA = –40°C to 85°C; VCC = 3.3 V ± 0.3 V | min 1.4 · max 4.1 ns | 5 |
| tpd tpd | A to Y; TA = –40°C to 85°C; VCC = 5 V ± 0.5 V | min 1 · max 3.2 ns | 5 |
| tpd tpd | A to Y; TA = –40°C to 125°C; VCC = 1.8 V ± 0.15 V | min 3.2 · max 9.6 ns | 5 |
| tpd tpd | A to Y; TA = –40°C to 125°C; VCC = 2.5 V ± 0.2 V | min 1.5 · max 4.9 ns | 5 |
| tpd tpd | A to Y; TA = –40°C to 125°C; VCC = 3.3 V ± 0.3 V | min 1.2 · max 4.6 ns | 5 |
| tpd tpd | A to Y; TA = –40°C to 125°C; VCC = 5 V ± 0.5 V | min 1 · max 3.7 ns | 5 |
| Power dissipation capacitance Cpd | TA = 25°C; f = 10 MHz; VCC = 1.8 V | typ 14 pF | 5 |
| Power dissipation capacitance Cpd | TA = 25°C; f = 10 MHz; VCC = 2.5 V | typ 14 pF | 5 |
| Power dissipation capacitance Cpd | TA = 25°C; f = 10 MHz; VCC = 3.3 V | typ 15 pF | 5 |
| Power dissipation capacitance Cpd | TA = 25°C; f = 10 MHz; VCC = 5 V | typ 17 pF | 5 |
Pins, by the datasheet
6- 1 1A
- Buffer Input 1 · p. 3
- 2 GND
- Ground pin · p. 3
- 3 2A
- Buffer Input 2 · p. 3
- 4 2Y
- Buffer Output 2 · p. 3
- 5 VCC
- Power pin · p. 3
- 6 1Y
- Buffer Output 1 · p. 3
Parts like it
8NL27WZ17DF
SC-70-6(SOT-363)-55℃~+125℃ 1 1.65V~5.5V 10uA 2 27WZ 3.7ns@5V,50pF 32mA 32mA Push-pull Schmitt trigger Unidirectional SC-70-6(SOT-363) Buffers, Drivers, Receivers, Transceivers ROHSonsemiBuffers, Drivers, Receivers, TransceiversNC7WZ04P6X
SOT-3631 1.65V~5.5V 1.9ns@5V,50pF 10uA 2 32mA 32mA Unidirectional SOT-363 Buffers, Drivers, Receivers, Transceivers ROHSTECH PUBLICBuffers, Drivers, Receivers, TransceiversNC7WZ07P6X
SOT-363-40℃~+125℃ 1.65V~5.5V 10uA 2 2.2ns@3.3V,50pF 24mA 24mA Schmitt trigger SOT-363 Buffers, Drivers, Receivers, Transceivers ROHSTECH PUBLICBuffers, Drivers, Receivers, TransceiversNC7WZ07P6X
SOT-363-6-40℃~+85℃ 1 1.65V~5.5V 10uA 2 2.3ns@5V,50pF 32mA Open-drain TinyLogic UHS Unidirectional SOT-363-6 Buffers, Drivers, Receivers, Transceivers ROHSonsemiBuffers, Drivers, Receivers, TransceiversNC7WZ16P6X
SC-70-6(SOT-363)-40℃~+125℃ 1 1.65V~5.5V 10uA 2 2.4ns@5V,50pF 32mA 32mA Power-off isolation、Level shifting TinyLogic Unidirectional SC-70-6(SOT-363) Buffers, Drivers, Receivers, Transceivers ROHSonsemiBuffers, Drivers, Receivers, TransceiversNC7WZ17P6X-JSM
SOT-363SOT-363 Buffers, Drivers, Receivers, Transceivers ROHSJSMSEMIBuffers, Drivers, Receivers, TransceiversNC7WZ17P6X
SOT-363-6-40℃~+85℃ 1 1.65V~5.5V 10uA 2 3.6ns@5V,50pF 32mA 32mA Schmitt trigger TinyLogic UHS Unidirectional SOT-363-6 Buffers, Drivers, Receivers, Transceivers ROHSonsemiBuffers, Drivers, Receivers, TransceiversNL27WZ07DF
SC-70-6-55℃~+125℃ 1 1.65V~5.5V 10uA 2 2.3ns@5V,50pF 24mA 27WZ Open-drain SC-70-6 Buffers, Drivers, Receivers, Transceivers ROHSonsemiBuffers, Drivers, Receivers, Transceivers
Questions
Is there a KiCad symbol and footprint for the SN74LVC2G34DCK?
Yes. The symbol is 74xGxx:74LVC2G34 and the footprint Package_TO_SOT_SMD:SOT-363_SC-70-6, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the SN74LVC2G34DCK?
SC-70-6, with 6 pins. Its footprint is drawn on this page.
Where is the SN74LVC2G34DCK datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the SN74LVC2G34DCK?
JLCPCB lists it as part C14461, with 26,764 in stock; the sellers' links on this page open their listings.
What can replace the SN74LVC2G34DCK?
Parts like it in the library: the NL27WZ17DF by onsemi, the NC7WZ04P6X by TECH PUBLIC, the NC7WZ07P6X by TECH PUBLIC and the NC7WZ07P6X by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.