Skip to the content
12345

SN74LVC1G86DBV

Texas InstrumentsExtended

-40℃~+125℃ 1 1.65V~5.5V 10uA 32mA 32mA 4ns@5V,50pF 74LVC Series Overvoltage-tolerant input、Rear drive protection、Level shifting、Local shutdown mode XOR Gate SOT-23-5 Logic Gates ROHS

Part id
ti/SN74LVC1G86DBV
Category
Logic Gates
Package
SOT-23-5
Pins
5
In stock
58,910 at JLCPCB (C402161)
Used on
4 open-source boards

Overview

The SN74LVC1G86DBV is a logic Gate made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃ 1 1.65V~5.5V 10uA 32mA 32mA 4ns@5V,50pF 74LVC Series Overvoltage-tolerant input、Rear drive protection、Level shifting、Local shutdown mode XOR Gate SOT-23-5 Logic Gates ROHS.

PCBKit's library has its KiCad symbol (74xGxx:74LVC1G86, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 58,910 are in stock at JLCPCB (part C402161). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

123GND45VCC
74xGxx:74LVC1G86From KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

10
Supply, least
1.65 V · VCC, recommended operating min · p. 4
Supply, most
5.5 V · VCC, recommended operating max · p. 4
Supply, absolute maximum
6.5 V · VCC, absolute max · p. 4
Works from
-40 °C · DBV operating free-air temperature min · p. 5
Works up to
125 °C · DBV operating free-air temperature max · p. 5
Junction, hottest
150 °C · Junction temperature absolute max · p. 4
Takes working
15 µA · ICC max, inputs at VCC or GND, no load, −40°C to 125°C · p. 5
Takes asleep
10 µA · Ioff leakage max magnitude, VCC = 0 V, VI or VO = 5.5 V · p. 5
A pin gives at most
50 mA · Continuous output current absolute max magnitude · p. 4
Junction to air (DBV (SOT-23))
206 K/W · Junction-to-ambient thermal resistance · p. 5

What it is and has

4
Logic function
Single 2-input exclusive-OR gate · p. 1
Protection
Partial power down and back-drive protection using Ioff · p. 1
Input voltage tolerance
Up to 5.5 V at any valid VCC · p. 10
Clamp diodes
Negative clamping diodes on inputs and outputs · p. 9

Around it

1
cap 0.1 µF
between VCC and GND; Supply bypass capacitor; install as close to the power pin as possible. · p. 11

Specifications

68
ParameterConditionsAs printedPage
Supply voltage VCCOver operating free-air temperature rangemin -0.5 · max 6.5 V4
Input voltage VIOver operating free-air temperature range; note (2)min -0.5 · max 6.5 V4
Voltage applied to any output in the high-impedance or power-off state VONote (2)min -0.5 · max 6.5 V4
Voltage applied to any output in the high or low state VONotes (2), (3); maximum is VCC + 0.5 Vmin -0.5 V4
Input clamp current IIKVI < 0max -50 mA4
Output clamp current IOKVO < 0max -50 mA4
Continuous output current IOMaximum magnitude; printed as ±50 mAmax 50 mA4
Continuous current through VCC or GNDMaximum magnitude; printed as ±100 mAmax 100 mA4
Junction temperature TJmax 150 °C4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001; listed VALUEmax 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; listed VALUEmax 1000 V4
Supply voltage VCCOperatingmin 1.65 · max 5.5 V4
Supply voltage VCCData retention onlymin 1.5 V4
High-level input voltage VIHVCC = 2.3 V to 2.7 Vmin 1.7 V4
High-level input voltage VIHVCC = 3 V to 3.6 Vmin 2 V4
Low-level input voltage VILVCC = 2.3 V to 2.7 Vmax 0.7 V4
Low-level input voltage VILVCC = 3 V to 3.6 Vmax 0.8 V4
Input voltage VImin 0 · max 5.5 V4
Output voltage VOMaximum is VCCmin 0 V4
High-level output current IOHVCC = 1.65 Vmax -4 mA4
High-level output current IOHVCC = 2.3 Vmax -8 mA4
High-level output current IOHVCC = 3 Vmax -16 mA4
High-level output current IOHVCC = 3 Vmax -24 mA4
High-level output current IOHVCC = 4.5 Vmax -32 mA4
Low-level output current IOLVCC = 1.65 Vmax 4 mA5
Low-level output current IOLVCC = 2.3 Vmax 8 mA5
Low-level output current IOLVCC = 3 Vmax 16 mA5
Low-level output current IOLVCC = 3 Vmax 24 mA5
Low-level output current IOLVCC = 4.5 Vmax 32 mA5
Input transition rise or fall rate Δt/ΔvVCC = 1.8 V ± 0.15 V, 2.5 V ± 0.2 Vmax 20 ns/V5
Input transition rise or fall rate Δt/ΔvVCC = 3.3 V ± 0.3 Vmax 10 ns/V5
Input transition rise or fall rate Δt/ΔvVCC = 5 V ± 0.5 Vmax 5 ns/V5
Operating free-air temperature TADBV packagemin -40 · max 125 °C5
Junction-to-ambient thermal resistance RθJADBV (SOT-23), 5 PINS; listed thermal metrictyp 206 °C/W5
VOH VOHIOH = –4 mA; VCC = 1.65 Vmin 1.2 V5
VOH VOHIOH = –8 mA; VCC = 2.3 Vmin 1.9 V5
VOH VOHIOH = –16 mA; VCC = 3 Vmin 2.4 V5
VOH VOHIOH = –24 mA; VCC = 3 Vmin 2.3 V5
VOH VOHIOH = –32 mA; VCC = 4.5 Vmin 3.8 V5
VOL VOLIOL = 100 uA; VCC = 1.65 V to 5.5 Vmax 0.1 V5
VOL VOLIOL = 4 mA; VCC = 1.65 Vmax 0.45 V5
VOL VOLIOL = 8 mA; VCC = 2.3 Vmax 0.3 V5
VOL VOLIOL = 16 mA; VCC = 3 Vmax 0.4 V5
VOL VOLIOL = 24 mA; VCC = 3 Vmax 0.55 V5
VOL VOLIOL = 32 mA; VCC = 4.5 Vmax 0.55 V5
A or B input IIVI = 5.5 V or GND; VCC = 0 to 5.5 V; maximum magnitude, printed as ±5 uAmax 5 uA5
Ioff IoffVI or VO = 5.5 V; VCC = 0 V; maximum magnitude, printed as ±10 uAmax 10 uA5
ICC ICCVI = VCC or GND; IO = 0; VCC = 1.65 V to 5.5 V; –40°C to 85°Cmax 10 uA5
ICC ICCVI = VCC or GND; IO = 0; VCC = 1.65 V to 5.5 V; –40°C to 125°Cmax 15 uA5
ΔICC ΔICCOne input at VCC – 0.6 V, other inputs at VCC or GND; VCC = 3 V to 5.5 Vmax 500 uA5
Ci CiVI = VCC or GND; VCC = 3.3 V; TA = 25°Ctyp 6 pF5
tpd tpdA or B to Y; TA = –40°C to +85°C; VCC = 1.8 V ± 0.15 Vmin 2.1 · max 9.1 ns6
tpd tpdA or B to Y; TA = –40°C to +85°C; VCC = 2.5 V ± 0.2 Vmin 1 · max 4.5 ns6
tpd tpdA or B to Y; TA = –40°C to +85°C; VCC = 3.3 V ± 0.3 Vmin 0.6 · max 4 ns6
tpd tpdA or B to Y; TA = –40°C to +85°C; VCC = 5 V ± 0.5 Vmin 0.8 · max 3.3 ns6
tpd tpdA or B to Y; –40°C to +85°C temperature range, see Figure 2; VCC = 1.8 V ± 0.15 Vmin 3.5 · max 9.9 ns6
tpd tpdA or B to Y; –40°C to +85°C temperature range, see Figure 2; VCC = 2.5 V ± 0.2 Vmin 1.8 · max 5.5 ns6
tpd tpdA or B to Y; –40°C to +85°C temperature range, see Figure 2; VCC = 3.3 V ± 0.3 Vmin 1.3 · max 5 ns6
tpd tpdA or B to Y; –40°C to +85°C temperature range, see Figure 2; VCC = 5 V ± 0.5 Vmin 1 · max 4 ns6
tpd tpdA or B to Y; –40°C to +125°C temperature range, see Figure 2; VCC = 1.8 V ± 0.15 Vmin 3.5 · max 12 ns6
tpd tpdA or B to Y; –40°C to +125°C temperature range, see Figure 2; VCC = 2.5 V ± 0.2 Vmin 1.8 · max 7 ns6
tpd tpdA or B to Y; –40°C to +125°C temperature range, see Figure 2; VCC = 3.3 V ± 0.3 Vmin 1.3 · max 6 ns6
tpd tpdA or B to Y; –40°C to +125°C temperature range, see Figure 2; VCC = 5 V ± 0.5 Vmin 1 · max 5 ns6
Power dissipation capacitance CpdTA = 25°C; f = 10 MHz; VCC = 1.8 Vtyp 22 pF6
Power dissipation capacitance CpdTA = 25°C; f = 10 MHz; VCC = 2.5 Vtyp 22 pF6
Power dissipation capacitance CpdTA = 25°C; f = 10 MHz; VCC = 3.3 Vtyp 22 pF6
Power dissipation capacitance CpdTA = 25°C; f = 10 MHz; VCC = 5 Vtyp 24 pF6

Pins, by the datasheet

5
1 A
Input A · p. 3
2 B
Input B · p. 3
3 GND
Ground · p. 3
4 Y
Output Y · p. 3
5 VCC
Positive Supply · p. 3

Ordering codes, by the datasheet

4
SN74LVC1G86DBVR
SOT-23 (DBV), 5 pins · Package quantity 3000; NIPDAU or SN lead finish; −40°C to 125°C · p. 14
SN74LVC1G86DBVRE4
SOT-23 (DBV), 5 pins · Package quantity 3000; NIPDAU lead finish; −40°C to 125°C · p. 14
SN74LVC1G86DBVRG4
SOT-23 (DBV), 5 pins · Package quantity 3000; NIPDAU lead finish; −40°C to 125°C · p. 14
SN74LVC1G86DBVT
SOT-23 (DBV), 5 pins · Package quantity 250; NIPDAU or SN lead finish; −40°C to 125°C · p. 14

Open-source boards using it

4
  • 4 layers100 × 100 mmController rev5.0 flat, the printed circuit board in 3D

    Controller rev5.0 flat

    oresat/oresat-adcs-hardware

    Controller PCB for OreSat reaction wheels, magnetorquers, IMU, and magnetometers

    207 parts21GPL-2.0
  • 2 layers60 × 40 mmXORgate, the printed circuit board in 3D

    XORgate

    shurik179/logicbits

    Logic Gates demonstration kit

    12 parts12MIT
  • 2 layers40 × 100.1 mmSupervisor, the printed circuit board in 3D

    Supervisor

    worlickwerx/pi-cluster-two

    Eurocard based raspberry pi cluster (take 2)

    57 parts8GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SN74LVC1G86DBV?

Yes. The symbol is 74xGxx:74LVC1G86 and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SN74LVC1G86DBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the SN74LVC1G86DBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the SN74LVC1G86DBV?

JLCPCB lists it as part C402161, with 58,910 in stock; the sellers' links on this page open their listings.

What can replace the SN74LVC1G86DBV?

Parts like it in the library: the SN74LVC1G04DBVR-JSM by JSMSEMI, the SN74LVC1G132DBV by Texas Instruments, the SN74AHC1G04DBVR by TECH PUBLIC and the SN74LVC1G04DBVR by TECH PUBLIC. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SN74LVC1G86DBV?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.