SN74LVC1G79DBV
Texas InstrumentsExtended
-40℃~+125℃ 1 1 1.3ns 1.65V~5.5V 10uA 160MHz 1ns 32mA 32mA 4.5ns@5V,50pF 4pF 74LVC Series D-Type Rising Edge SOT-23-5 Flip Flops ROHS
- Part id
- ti/SN74LVC1G79DBV
- Category
- Flip Flops
- Package
- SOT-23-5
- Pins
- 5
- In stock
- 12,459 at JLCPCB (C42878)
Overview
The SN74LVC1G79DBV is a flip Flop made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃ 1 1 1.3ns 1.65V~5.5V 10uA 160MHz 1ns 32mA 32mA 4.5ns@5V,50pF 4pF 74LVC Series D-Type Rising Edge SOT-23-5 Flip Flops ROHS.
PCBKit's library has its KiCad symbol (74xGxx:74LVC1G79, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 12,459 are in stock at JLCPCB (part C42878).
Symbol
Footprint
From the datasheet
11- Supply, least
- 1.65 V · VCC, recommended operating min · p. 5
- Supply, most
- 5.5 V · VCC, recommended operating max · p. 5
- Supply, absolute maximum
- 6.5 V · VCC, absolute maximum · p. 4
- Works from
- -40 °C · Operating free-air temperature min · p. 5
- Works up to
- 125 °C · Operating free-air temperature max · p. 5
- Junction, hottest
- 150 °C · Junction temperature max · p. 4
- Takes working
- 10 µA · VCC supply current max, VI = 5.5 V or GND, IO = 0 · p. 6
- A pin gives at most
- 50 mA · Continuous output source or sink current absolute maximum · p. 4
- Junction to air (DBV (SOT-23))
- 247.2 K/W · Junction-to-ambient thermal resistance · p. 5
- Junction to case (DBV (SOT-23))
- 154.5 K/W · Junction-to-case (top) thermal resistance · p. 5
- Junction to board (DBV (SOT-23))
- 86.8 K/W · Junction-to-board thermal resistance · p. 5
What it is and has
5- Logic function
- Single positive-edge-triggered D-type flip-flop · p. 11
- Input voltage tolerance
- Up to 5.5 V · p. 1
- Output drive
- ±24 mA at 3.3 V · p. 1
- Protection
- Ioff partial power-down and back-drive protection · p. 1
- Package
- SOT-23, 5 pins, 2.90 mm × 1.60 mm · p. 1
Around it
2- cap 0.1-µF
- between VCC and GND; Recommended bypass capacitor; install as close to the power terminal as possible. · p. 14
- cap 1 µF
- between VCC and GND; Commonly used in parallel with 0.1 uF to reject different noise frequencies; place close to the power terminal. · p. 14
Specifications
112| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage VCC | Over operating free-air temperature range | min -0.5 · max 6.5 V | 4 |
| Input voltage VI | Over operating free-air temperature range | min -0.5 · max 6.5 V | 4 |
| Voltage range applied to any output in the high-impedance or power-off state VO | Over operating free-air temperature range | min -0.5 · max 6.5 V | 4 |
| Voltage range applied to any output in the high or low state VO | Maximum = VCC + 0.5 V | min -0.5 V | 4 |
| Input clamp current IIK | VI < 0 | max -50 mA | 4 |
| Output clamp current IOK | VO < 0 | max -50 mA | 4 |
| Continuous output current IO | ±50 mA limit | max 50 mA | 4 |
| Continuous current through VCC or GND | ±100 mA limit | max 100 mA | 4 |
| Storage temperature Tstg | min -65 · max 150 °C | 4 | |
| Junction temperature TJ | max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±2000 V | max 2000 V | 4 |
| Electrostatic discharge V(ESD) | Charged device model (CDM), per JEDEC specification JESD22-C101; ±1000 V | max 1000 V | 4 |
| Electrostatic discharge V(ESD) | Machine Model (MM), A115-A | max 200 V | 4 |
| Supply voltage VCC | Operating | min 1.65 · max 5.5 V | 5 |
| Supply voltage VCC | Data retention only | min 1.5 V | 5 |
| High-level input voltage VIH | VCC = 2.3 V to 2.7 V | min 1.7 V | 5 |
| High-level input voltage VIH | VCC = 3 V to 3.6 V | min 2 V | 5 |
| Low-level input voltage VIL | VCC = 2.3 V to 2.7 V | max 0.7 V | 5 |
| Low-level input voltage VIL | VCC = 3 V to 3.6 V | max 0.8 V | 5 |
| Input voltage VI | min 0 · max 5.5 V | 5 | |
| Output voltage VO | Maximum = VCC | min 0 V | 5 |
| High-level output current IOH | VCC = 1.65 V | max -4 mA | 5 |
| High-level output current IOH | VCC = 2.3 V | max -8 mA | 5 |
| High-level output current IOH | VCC = 3 V | max -16 mA | 5 |
| High-level output current IOH | VCC = 3 V | max -24 mA | 5 |
| High-level output current IOH | VCC = 4.5 V | max -32 mA | 5 |
| Low-level output current IOL | VCC = 1.65 V | max 4 mA | 5 |
| Low-level output current IOL | VCC = 2.3 V | max 8 mA | 5 |
| Low-level output current IOL | VCC = 3 V | max 16 mA | 5 |
| Low-level output current IOL | VCC = 3 V | max 24 mA | 5 |
| Low-level output current IOL | VCC = 4.5 V | max 32 mA | 5 |
| Input transition rise or fall rate Δt/Δv | VCC = 1.8 V ± 0.15 V, 2.5 V ± 0.2 V | max 20 ns/V | 5 |
| Input transition rise or fall rate Δt/Δv | VCC = 3.3 V ± 0.3 V | max 10 ns/V | 5 |
| Input transition rise or fall rate Δt/Δv | VCC = 5 V ± 0.5 V | max 5 ns/V | 5 |
| Operating free-air temperature TA | min -40 · max 125 °C | 5 | |
| Junction-to-ambient thermal resistance RθJA | DBV (SOT-23), 5 PINS | typ 247.2 °C/W | 5 |
| Junction-to-case (top) thermal resistance RθJC(top) | DBV (SOT-23), 5 PINS | typ 154.5 °C/W | 5 |
| Junction-to-board thermal resistance RθJB | DBV (SOT-23), 5 PINS | typ 86.8 °C/W | 5 |
| Junction-to-top characterization parameter ψJT | DBV (SOT-23), 5 PINS | typ 58 °C/W | 5 |
| Junction-to-board characterization parameter ψJB | DBV (SOT-23), 5 PINS | typ 86.4 °C/W | 5 |
| VOH VOH | IOH = –4 mA; VCC = 1.65 V; TA = –40°C to +85°C | min 1.2 V | 6 |
| VOH VOH | IOH = –4 mA; VCC = 1.65 V; TA = –40°C to +125°C | min 1.2 V | 6 |
| VOH VOH | IOH = –8 mA; VCC = 2.3 V; TA = –40°C to +85°C | min 1.9 V | 6 |
| VOH VOH | IOH = –8 mA; VCC = 2.3 V; TA = –40°C to +125°C | min 1.9 V | 6 |
| VOH VOH | IOH = –16 mA; VCC = 3 V; TA = –40°C to +85°C | min 2.4 V | 6 |
| VOH VOH | IOH = –16 mA; VCC = 3 V; TA = –40°C to +125°C | min 2.4 V | 6 |
| VOH VOH | IOH = –24 mA; VCC = 3 V; TA = –40°C to +85°C | min 2.3 V | 6 |
| VOH VOH | IOH = –24 mA; VCC = 3 V; TA = –40°C to +125°C | min 2.3 V | 6 |
| VOH VOH | IOH = –32 mA; VCC = 4.5 V; TA = –40°C to +85°C | min 3.8 V | 6 |
| VOH VOH | IOH = –32 mA; VCC = 4.5 V; TA = –40°C to +125°C | min 3.8 V | 6 |
| VOL VOL | IOL = 100 uA; VCC = 1.65 V to 5.5 V; TA = –40°C to +85°C | max 0.1 V | 6 |
| VOL VOL | IOL = 100 uA; VCC = 1.65 V to 5.5 V; TA = –40°C to +125°C | max 0.1 V | 6 |
| VOL VOL | IOL = 4 mA; VCC = 1.65 V; TA = –40°C to +85°C | max 0.45 V | 6 |
| VOL VOL | IOL = 4 mA; VCC = 1.65 V; TA = –40°C to +125°C | max 0.45 V | 6 |
| VOL VOL | IOL = 8 mA; VCC = 2.3 V; TA = –40°C to +85°C | max 0.3 V | 6 |
| VOL VOL | IOL = 8 mA; VCC = 2.3 V; TA = –40°C to +125°C | max 0.3 V | 6 |
| VOL VOL | IOL = 16 mA; VCC = 3 V; TA = –40°C to +85°C | max 0.4 V | 6 |
| VOL VOL | IOL = 16 mA; VCC = 3 V; TA = –40°C to +125°C | max 0.4 V | 6 |
| VOL VOL | IOL = 24 mA; VCC = 3 V; TA = –40°C to +85°C | max 0.55 V | 6 |
| VOL VOL | IOL = 24 mA; VCC = 3 V; TA = –40°C to +125°C | max 0.55 V | 6 |
| VOL VOL | IOL = 32 mA; VCC = 4.5 V; TA = –40°C to +85°C | max 0.55 V | 6 |
| VOL VOL | IOL = 32 mA; VCC = 4.5 V; TA = –40°C to +125°C | max 0.55 V | 6 |
| All inputs II | VI = 5.5 V or GND; VCC = 0 to 5.5 V; TA = –40°C to +85°C; ±10 uA limit | max 10 uA | 6 |
| All inputs II | VI = 5.5 V or GND; VCC = 0 to 5.5 V; TA = –40°C to +125°C; ±5 uA limit | max 5 uA | 6 |
| Ioff Ioff | VI or VO = 5.5 V; VCC = 0 V; TA = –40°C to +85°C; ±10 uA limit | max 10 uA | 6 |
| Ioff Ioff | VI or VO = 5.5 V; VCC = 0 V; TA = –40°C to +125°C; ±10 uA limit | max 10 uA | 6 |
| ICC ICC | VI = 5.5 V or GND; IO = 0; VCC = 1.65 V to 5.5 V; TA = –40°C to +85°C | max 10 uA | 6 |
| ICC ICC | VI = 5.5 V or GND; IO = 0; VCC = 1.65 V to 5.5 V; TA = –40°C to +125°C | max 10 uA | 6 |
| ΔICC ΔICC | One input at VCC – 0.6 V, other inputs at VCC or GND; VCC = 3 V to 5.5 V; TA = –40°C to +85°C | max 500 uA | 6 |
| ΔICC ΔICC | One input at VCC – 0.6 V, other inputs at VCC or GND; VCC = 3 V to 5.5 V; TA = –40°C to +125°C | max 500 uA | 6 |
| Ci Ci | VI = VCC or GND; VCC = 3.3 V; TA = –40°C to +85°C column; typical at TA = 25°C | typ 4 pF | 6 |
| Ci Ci | VI = VCC or GND; VCC = 3.3 V; TA = –40°C to +125°C column; typical at TA = 25°C | typ 4 pF | 6 |
| Clock frequency fclock | VCC = 1.8 ± 0.15 V | max 160 MHz | 6 |
| Clock frequency fclock | VCC = 2.5 ± 0.2 V | max 160 MHz | 6 |
| Clock frequency fclock | VCC = 3.3 V ± 0.3 V | max 160 MHz | 6 |
| Clock frequency fclock | VCC = 5 V ± 0.5 V | max 160 MHz | 6 |
| Pulse duration, CLK high or low tw | VCC = 1.8 ± 0.15 V | min 2.5 ns | 6 |
| Pulse duration, CLK high or low tw | VCC = 2.5 ± 0.2 V | min 2.5 ns | 6 |
| Pulse duration, CLK high or low tw | VCC = 3.3 V ± 0.3 V | min 2.5 ns | 6 |
| Pulse duration, CLK high or low tw | VCC = 5 V ± 0.5 V | min 2.5 ns | 6 |
| Setup time before CLK↑ tsu | Data high; VCC = 1.8 ± 0.15 V | min 2.2 ns | 6 |
| Setup time before CLK↑ tsu | Data high; VCC = 2.5 ± 0.2 V | min 1.4 ns | 6 |
| Setup time before CLK↑ tsu | Data high; VCC = 3.3 V ± 0.3 V | min 1.3 ns | 6 |
| Setup time before CLK↑ tsu | Data high; VCC = 5 V ± 0.5 V | min 1.2 ns | 6 |
| Setup time before CLK↑ tsu | Data low; VCC = 1.8 ± 0.15 V | min 2.6 ns | 6 |
| Setup time before CLK↑ tsu | Data low; VCC = 2.5 ± 0.2 V | min 1.4 ns | 6 |
| Setup time before CLK↑ tsu | Data low; VCC = 3.3 V ± 0.3 V | min 1.3 ns | 6 |
| Setup time before CLK↑ tsu | Data low; VCC = 5 V ± 0.5 V | min 1.2 ns | 6 |
| Hold time, data after CLK↑ th | VCC = 1.8 ± 0.15 V | min 0.3 ns | 6 |
| Hold time, data after CLK↑ th | VCC = 2.5 ± 0.2 V | min 0.4 ns | 6 |
| Hold time, data after CLK↑ th | VCC = 3.3 V ± 0.3 V | min 1 ns | 6 |
| Hold time, data after CLK↑ th | VCC = 5 V ± 0.5 V | min 0.5 ns | 6 |
| fmax fmax | VCC = 1.8 V ± 0.15 V | min 160 MHz | 7 |
| fmax fmax | VCC = 2.5 V ± 0.2 V | min 160 MHz | 7 |
| fmax fmax | VCC = 3.3 V ± 0.3 V | min 160 MHz | 7 |
| fmax fmax | VCC = 5 V ± 0.5 V | min 160 MHz | 7 |
| tpd tpd | CLK to Q; VCC = 1.8 V ± 0.15 V | min 2.5 · max 9.1 ns | 7 |
| tpd tpd | CLK to Q; VCC = 2.5 V ± 0.2 V | min 1.2 · max 6 ns | 7 |
| tpd tpd | CLK to Q; VCC = 3.3 V ± 0.3 V | min 1 · max 4 ns | 7 |
| tpd tpd | CLK to Q; VCC = 5 V ± 0.5 V | min 0.8 · max 3.8 ns | 7 |
| tpd tpd | CLK to Q; VCC = 1.8 V ± 0.15 V | min 3.9 · max 9.9 ns | 7 |
| tpd tpd | CLK to Q; VCC = 2.5 V ± 0.2 V | min 2 · max 7 ns | 7 |
| tpd tpd | CLK to Q; VCC = 3.3 V ± 0.3 V | min 1.7 · max 5 ns | 7 |
| tpd tpd | CLK to Q; VCC = 5 V ± 0.5 V | min 1 · max 4.5 ns | 7 |
| tpd tpd | CLK to Q; VCC = 1.8 V ± 0.15 V | min 3.9 · max 12 ns | 7 |
| tpd tpd | CLK to Q; VCC = 2.5 V ± 0.2 V | min 2 · max 8.5 ns | 7 |
| tpd tpd | CLK to Q; VCC = 3.3 V ± 0.3 V | min 1.7 · max 6 ns | 7 |
| tpd tpd | CLK to Q; VCC = 5 V ± 0.5 V | min 1 · max 5 ns | 7 |
| Power dissipation capacitance Cpd | TA = 25°C; f = 10 MHz; VCC = 1.8 V | typ 26 pF | 7 |
| Power dissipation capacitance Cpd | TA = 25°C; f = 10 MHz; VCC = 2.5 V | typ 26 pF | 7 |
| Power dissipation capacitance Cpd | TA = 25°C; f = 10 MHz; VCC = 3.3 V | typ 27 pF | 7 |
| Power dissipation capacitance Cpd | TA = 25°C; f = 10 MHz; VCC = 5 V | typ 30 pF | 7 |
Pins, by the datasheet
5- 1 D
- Data input. · p. 3
- 2 CLK
- Positive-Edge-Triggered Clock input. · p. 3
- 3 GND
- Ground. · p. 3
- 4 Q
- Non-inverted output. · p. 3
- 5 VCC
- Positive Supply. · p. 3
Parts like it
8SN74LVC1G80DBVRE4
SOT-23-5-40℃~+125℃ 1 1.3ns 1.65V~5.5V 10uA 160MHz 24mA 24mA 3.5pF 4.2ns@3.3V,15pF 74LVC 900ps D-Type Push-Pull Rising Edge SOT-23-5 Flip Flops ROHSTexas InstrumentsFlip FlopsSN74LVC1G80DCK
SC-70-5-40℃~+125℃ 1 1 1.3ns 1.65V~5.5V 10uA 160MHz 3.5pF 32mA 32mA 4.5ns@5V,50pF 74LVC Series 900ps D-Type Rising Edge SC-70-5 Flip Flops ROHSTexas InstrumentsFlip FlopsSN74LVC1G79DCK
SC-70-5-40℃~+125℃ 1 1 1.3ns 1.65V~5.5V 10uA 160MHz 1ns 32mA 32mA 4.5ns@5V,50pF 4pF 74LVC Series D-Type Push-Pull Rising Edge SC-70-5 Flip Flops ROHSTexas InstrumentsFlip FlopsSN74LV273ADW
SOIC-20-300mil-40℃~+85℃ 11ns@5V,50pF 12mA 12mA 160MHz 1ns 20uA 2V~5.5V 2pF 4.5ns 74LV Series D-Type Reset Rising Edge SOIC-20-300mil Flip Flops ROHSTexas InstrumentsFlip FlopsMC74ACT374DW
SOIC-20-300mil-40℃~+85℃ 1 1.5ns 160MHz 1ns 24mA 24mA 4.5V~5.5V 4.5pF 74ACT Series 8 8.5ns@5V,50pF 8uA D-Type Rising Edge Tri-State SOIC-20-300mil Flip Flops ROHSonsemiFlip FlopsSN74LV273ADWG4
SOIC-20-300mil-40℃~+125℃ 12mA 12mA 160MHz 20uA 2V~5.5V 2pF 4.5ns 4.8ns@5V,15pF 500ps 8 D-Type Push-Pull Reset Rising Edge SOIC-20-300mil Flip Flops ROHSTexas InstrumentsFlip FlopsSN74LV273ADBRE4
SSOP-20-208mil-40℃~+125℃ 1 11ns@5V,50pF 12mA 12mA 160MHz 20uA 2V~5.5V 2ns 2pF 4.5ns 8 Asynchronous D-Type Push-Pull Reset Rising Edge SSOP-20-208mil Flip Flops ROHSTexas InstrumentsFlip Flops74LVT16374MTD
TSSOP-48-6.2mm-40℃~+85℃ 1.8ns 160MHz 190uA 2 2.7V~3.6V 32mA 4.5ns@3.3V,50pF 4pF 64mA 74LVT Series 8 800ps D-Type Rising Edge Tri-State TSSOP-48-6.2mm Flip Flops ROHSonsemiFlip Flops
Questions
Is there a KiCad symbol and footprint for the SN74LVC1G79DBV?
Yes. The symbol is 74xGxx:74LVC1G79 and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the SN74LVC1G79DBV?
SOT-23-5, with 5 pins. Its footprint is drawn on this page.
Where is the SN74LVC1G79DBV datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the SN74LVC1G79DBV?
JLCPCB lists it as part C42878, with 12,459 in stock; the sellers' links on this page open their listings.
What can replace the SN74LVC1G79DBV?
Parts like it in the library: the SN74LVC1G80DBVRE4 by Texas Instruments, the SN74LVC1G80DCK by Texas Instruments, the SN74LVC1G79DCK by Texas Instruments and the SN74LV273ADW by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.