Skip to the content
12345

SN74LVC1G126DCK

Texas InstrumentsExtended

-40℃~+125℃ 1 1 1.65V~5.5V 10uA 3.7ns@3.3V,15pF 32mA 32mA 74LVC Tri-State Unidirectional SC-70-5 Buffers, Drivers, Receivers, Transceivers ROHS

Part id
ti/SN74LVC1G126DCK
Category
Buffers, Drivers, Receivers, Transceivers
Package
SC-70-5
Pins
5
In stock
34,397 at JLCPCB (C88039)
Used on
1 open-source board

Overview

The SN74LVC1G126DCK is a buffers, Drivers, Receivers, Transceiver made by Texas Instruments in a SC-70-5 package with 5 pins. -40℃~+125℃ 1 1 1.65V~5.5V 10uA 3.7ns@3.3V,15pF 32mA 32mA 74LVC Tri-State Unidirectional SC-70-5 Buffers, Drivers, Receivers, Transceivers ROHS.

PCBKit's library has its KiCad symbol (74xGxx:74LVC1G126, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-353_SC-70-5, from KiCad's library), ready for a KiCad board. 34,397 are in stock at JLCPCB (part C88039). 1 open-source board in 1 repository on GitHub use it.

Symbol

123GND45VCC
74xGxx:74LVC1G126From KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-353_SC-70-5From KiCad's library

From the datasheet

8
Supply, least
1.65 V · VCC, recommended operating min · p. 5
Supply, most
5.5 V · VCC, recommended operating max · p. 5
Supply, absolute maximum
6.5 V · VCC, absolute max · p. 4
Works from
-40 °C · Operating free-air temperature min · p. 5
Works up to
125 °C · Operating free-air temperature max · p. 5
Takes working
10 µA · VCC supply current max, IO = 0 · p. 6
A pin gives at most
50 mA · Continuous output current absolute max, source or sink · p. 4
Junction to air (DCK)
252 K/W · Junction-to-ambient thermal resistance · p. 5

What it is and has

7
Function
Single bus buffer gate with 3-state output · p. 1
Supply operation
Supports 5-V VCC operation · p. 1
Input tolerance
5.5 V · p. 1
Voltage translation
Down translation to VCC · p. 1
Propagation delay
3.7 ns maximum at 3.3 V · p. 1
Output drive
±24 mA at 3.3 V · p. 1
Package
SC70, 5 pins, 2.00 mm × 1.25 mm body · p. 1

Around it

1
cap 0.1 μF
between VCC and GND; Supply bypass capacitor; install as close to the power terminal as possible. · p. 12

Specifications

87
ParameterConditionsAs printedPage
Supply voltage range VCCOver operating free-air temperature rangemin -0.5 · max 6.5 V4
Input voltage range VIOver operating free-air temperature rangemin -0.5 · max 6.5 V4
Voltage range applied to any output in the high-impedance or power-off state VOOver operating free-air temperature rangemin -0.5 · max 6.5 V4
Voltage range applied to any output in the high or low state VOMaximum is VCC + 0.5 Vmin -0.5 V4
Input clamp current IIKVI < 0max -50 mA4
Output clamp current IOKVO < 0max -50 mA4
Continuous output current IOLimit printed as ±50 mAmax 50 mA4
Continuous current through VCC or GNDLimit printed as ±100 mAmax 100 mA4
Storage temperature range Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; VALUE columnmax 2000 V4
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pins; VALUE columnmax 1000 V4
Supply voltage VCCOperatingmin 1.65 · max 5.5 V5
Supply voltage VCCData retention onlymin 1.5 V5
High-level input voltage VIHVCC = 2.3 V to 2.7 Vmin 1.7 V5
High-level input voltage VIHVCC = 3 V to 3.6 Vmin 2 V5
Low-level input voltage VILVCC = 2.3 V to 2.7 Vmax 0.7 V5
Low-level input voltage VILVCC = 3 V to 3.6 Vmax 0.8 V5
Input voltage VImin 0 · max 5.5 V5
Output voltage VOMaximum is VCCmin 0 V5
High-level output current IOHVCC = 1.65 Vmax -4 mA5
High-level output current IOHVCC = 2.3 Vmax -8 mA5
High-level output current IOHVCC = 3 Vmax -16 mA5
High-level output current IOHVCC = 3 Vmax -24 mA5
High-level output current IOHVCC = 4.5 Vmax -32 mA5
Low-level output current IOLVCC = 1.65 Vmax 4 mA5
Low-level output current IOLVCC = 2.3 Vmax 8 mA5
Low-level output current IOLVCC = 3 Vmax 16 mA5
Low-level output current IOLVCC = 3 Vmax 24 mA5
Low-level output current IOLVCC = 4.5 Vmax 32 mA5
Input transition rise or fall rate Δt/ΔvVCC = 1.8 V ± 0.15 V, 2.5 V ± 0.2 Vmax 20 ns/V5
Input transition rise or fall rate Δt/ΔvVCC = 3.3 V ± 0.3 Vmax 10 ns/V5
Input transition rise or fall rate Δt/ΔvVCC = 5 V ± 0.5 Vmax 5 ns/V5
Operating free-air temperature TAmin -40 · max 125 °C5
Junction-to-ambient thermal resistance RθJASN74LVC1G126, DCK, 5 PINStyp 252 °C/W5
VOH VOHIOH = –4 mA; VCC = 1.65 V; –40°C to 85°C and –40°C to 125°Cmin 1.2 V6
VOH VOHIOH = –8 mA; VCC = 2.3 V; –40°C to 85°C and –40°C to 125°Cmin 1.9 V6
VOH VOHIOH = –16 mA; VCC = 3 V; –40°C to 85°C and –40°C to 125°Cmin 2.4 V6
VOH VOHIOH = –24 mA; VCC = 3 V; –40°C to 85°C and –40°C to 125°Cmin 2.3 V6
VOH VOHIOH = –32 mA; VCC = 4.5 V; –40°C to 85°C and –40°C to 125°Cmin 3.8 V6
VOL VOLIOL = 100 uA; VCC = 1.65 V to 5.5 V; –40°C to 85°C and –40°C to 125°Cmax 0.1 V6
VOL VOLIOL = 4 mA; VCC = 1.65 V; –40°C to 85°C and –40°C to 125°Cmax 0.45 V6
VOL VOLIOL = 8 mA; VCC = 2.3 V; –40°C to 85°C and –40°C to 125°Cmax 0.3 V6
VOL VOLIOL = 16 mA; VCC = 3 V; –40°C to 85°C and –40°C to 125°Cmax 0.4 V6
VOL VOLIOL = 24 mA; VCC = 3 V; –40°C to 85°C and –40°C to 125°Cmax 0.55 V6
VOL VOLIOL = 32 mA; VCC = 4.5 V; –40°C to 85°C and –40°C to 125°Cmax 0.55 V6
II IIA or OE inputs; VI = 5.5 V or GND; VCC = 0 to 5.5 V; –40°C to 85°C and –40°C to 125°C; limit printed as ±5 uAmax 5 uA6
Ioff IoffVI or VO = 5.5 V; VCC = 0; –40°C to 85°C and –40°C to 125°C; limit printed as ±10 uAmax 10 uA6
IOZ IOZVO = 0 to 5.5 V; VCC = 3.6 V; –40°C to 85°C and –40°C to 125°Cmax 10 uA6
ICC ICCVI = 5.5 V or GND; IO = 0; VCC = 1.65 V to 5.5 V; –40°C to 85°C and –40°C to 125°Cmax 10 uA6
ΔICC ΔICCOne input at VCC – 0.6 V, other inputs at VCC or GND; VCC = 3 V to 5.5 V; –40°C to 85°C and –40°C to 125°Cmax 500 uA6
Ci CiVI = VCC or GND; VCC = 3.3 V; TA = 25°Ctyp 4 pF6
tpd tpdA to Y; CL = 15 pF; –40°C to 85°C; VCC = 1.8 V ± 0.15 Vmin 1.7 · max 6.9 ns6
tpd tpdA to Y; CL = 15 pF; –40°C to 85°C; VCC = 2.5 V ± 0.2 Vmin 0.6 · max 4.6 ns6
tpd tpdA to Y; CL = 15 pF; –40°C to 85°C; VCC = 3.3 V ± 0.3 Vmin 0.6 · max 3.7 ns6
tpd tpdA to Y; CL = 15 pF; –40°C to 85°C; VCC = 5 V ± 0.5 Vmin 0.5 · max 3.4 ns6
tpd tpdA to Y; CL = 30 pF or 50 pF; VCC = 1.8 V ± 0.15 Vmin 2.6 · max 8 ns6
tpd tpdA to Y; CL = 30 pF or 50 pF; VCC = 2.5 V ± 0.2 Vmin 1.1 · max 5.5 ns6
tpd tpdA to Y; CL = 30 pF or 50 pF; VCC = 3.3 V ± 0.3 Vmin 1 · max 4.5 ns6
tpd tpdA to Y; CL = 30 pF or 50 pF; VCC = 5 V ± 0.5 Vmin 1 · max 4 ns6
ten tenOE to Y; CL = 30 pF or 50 pF; VCC = 1.8 V ± 0.15 Vmin 2.8 · max 9.4 ns6
ten tenOE to Y; CL = 30 pF or 50 pF; VCC = 2.5 V ± 0.2 Vmin 1.3 · max 6.6 ns6
ten tenOE to Y; CL = 30 pF or 50 pF; VCC = 3.3 V ± 0.3 Vmin 1.2 · max 5.3 ns6
ten tenOE to Y; CL = 30 pF or 50 pF; VCC = 5 V ± 0.5 Vmin 1 · max 5 ns6
tdis tdisOE to Y; CL = 30 pF or 50 pF; VCC = 1.8 V ± 0.15 Vmin 1.6 · max 9.8 ns6
tdis tdisOE to Y; CL = 30 pF or 50 pF; VCC = 2.5 V ± 0.2 Vmin 1 · max 5.5 ns6
tdis tdisOE to Y; CL = 30 pF or 50 pF; VCC = 3.3 V ± 0.3 Vmin 1 · max 5.5 ns6
tdis tdisOE to Y; CL = 30 pF or 50 pF; VCC = 5 V ± 0.5 Vmin 1 · max 4.2 ns6
tpd tpdA to Y; CL = 30 pF or 50 pF; VCC = 1.8 V ± 0.15 Vmin 2.6 · max 9 ns7
tpd tpdA to Y; CL = 30 pF or 50 pF; VCC = 2.5 V ± 0.2 Vmin 1.1 · max 5.7 ns7
tpd tpdA to Y; CL = 30 pF or 50 pF; VCC = 3.3 V ± 0.3 Vmin 1 · max 4.7 ns7
tpd tpdA to Y; CL = 30 pF or 50 pF; VCC = 5 V ± 0.5 Vmin 1 · max 4.2 ns7
ten tenOE to Y; CL = 30 pF or 50 pF; VCC = 1.8 V ± 0.15 Vmin 2.8 · max 9.6 ns7
ten tenOE to Y; CL = 30 pF or 50 pF; VCC = 2.5 V ± 0.2 Vmin 1.3 · max 6.8 ns7
ten tenOE to Y; CL = 30 pF or 50 pF; VCC = 3.3 V ± 0.3 Vmin 1.2 · max 5.5 ns7
ten tenOE to Y; CL = 30 pF or 50 pF; VCC = 5 V ± 0.5 Vmin 1 · max 5.2 ns7
tdis tdisOE to Y; CL = 30 pF or 50 pF; VCC = 1.8 V ± 0.15 Vmin 1.6 · max 10 ns7
tdis tdisOE to Y; CL = 30 pF or 50 pF; VCC = 2.5 V ± 0.2 Vmin 1 · max 5.7 ns7
tdis tdisOE to Y; CL = 30 pF or 50 pF; VCC = 3.3 V ± 0.3 Vmin 1 · max 5.7 ns7
tdis tdisOE to Y; CL = 30 pF or 50 pF; VCC = 5 V ± 0.5 Vmin 1 · max 4.4 ns7
Power dissipation capacitance CpdOutputs enabled; f = 10 MHz; TA = 25°C; VCC = 1.8 Vtyp 19 pF7
Power dissipation capacitance CpdOutputs enabled; f = 10 MHz; TA = 25°C; VCC = 2.5 Vtyp 19 pF7
Power dissipation capacitance CpdOutputs enabled; f = 10 MHz; TA = 25°C; VCC = 3.3 Vtyp 19 pF7
Power dissipation capacitance CpdOutputs enabled; f = 10 MHz; TA = 25°C; VCC = 5 Vtyp 21 pF7
Power dissipation capacitance CpdOutputs disabled; f = 10 MHz; TA = 25°C; VCC = 1.8 Vtyp 2 pF7
Power dissipation capacitance CpdOutputs disabled; f = 10 MHz; TA = 25°C; VCC = 2.5 Vtyp 2 pF7
Power dissipation capacitance CpdOutputs disabled; f = 10 MHz; TA = 25°C; VCC = 3.3 Vtyp 3 pF7
Power dissipation capacitance CpdOutputs disabled; f = 10 MHz; TA = 25°C; VCC = 5 Vtyp 4 pF7

Pins, by the datasheet

5
1 OE
Output-enable input; low disables the output. · p. 3
2 A
A Input. · p. 3
3 GND
Ground Pin. · p. 3
4 Y
Y Output. · p. 3
5 VCC
Power Pin. · p. 3

Ordering codes, by the datasheet

5
74LVC1G126DCKRE4
SC70 · DCK, 5 pins; package quantity 3000; NIPDAU finish; -40 to 125°C · p. 14
74LVC1G126DCKRG4
SC70 · DCK, 5 pins; package quantity 3000; NIPDAU finish; -40 to 125°C · p. 14
74LVC1G126DCKTG4
SC70 · DCK, 5 pins; package quantity 250; NIPDAU finish; -40 to 125°C · p. 14
SN74LVC1G126DCKR
SC70 · DCK, 5 pins; package quantity 3000; NIPDAU or SN finish; -40 to 125°C · p. 14
SN74LVC1G126DCKT
SC70 · DCK, 5 pins; package quantity 250; NIPDAU or SN finish; -40 to 125°C · p. 14

Open-source boards using it

1
  • 2 layers35 × 35 mmDuplexUARTtoHalf, the printed circuit board in 3D

    DuplexUARTtoHalf

    freudenthal/DuplexToHalfUART

    A single PCB to convert full duplex (RX, TX) to half duplex (only 'data') for controlling UART serial servos.

    29 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SN74LVC1G126DCK?

Yes. The symbol is 74xGxx:74LVC1G126 and the footprint Package_TO_SOT_SMD:SOT-353_SC-70-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SN74LVC1G126DCK?

SC-70-5, with 5 pins. Its footprint is drawn on this page.

Where is the SN74LVC1G126DCK datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the SN74LVC1G126DCK?

JLCPCB lists it as part C88039, with 34,397 in stock; the sellers' links on this page open their listings.

What can replace the SN74LVC1G126DCK?

Parts like it in the library: the NC7SZ125P5X by onsemi, the SN74LVC1G34DCKR-JSM by JSMSEMI, the SN74LVC1G06DCK by Texas Instruments and the SN74AUP1G07DCK by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SN74LVC1G126DCK?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.