Skip to the content
12345

SN74LVC1G08DCK

Texas InstrumentsExtended

-40℃~+125℃ 1 1.65V~5.5V 1.7V、2V 10uA 2 2.3V 24mA 3.6ns@3.3V 32mA 550mV 700mV、800mV 74LVC Series AND Gate Overvoltage-tolerant input、Rear drive protection、Local shutdown mode、Live insertion protection SC-70-5 Logic Gates ROHS

Part id
ti/SN74LVC1G08DCK
Category
Logic Gates
Package
SC-70-5
Pins
5
In stock
330,544 at JLCPCB (C7832)
Used on
2 open-source boards

Overview

The SN74LVC1G08DCK is a logic Gate made by Texas Instruments in a SC-70-5 package with 5 pins. -40℃~+125℃ 1 1.65V~5.5V 1.7V、2V 10uA 2 2.3V 24mA 3.6ns@3.3V 32mA 550mV 700mV、800mV 74LVC Series AND Gate Overvoltage-tolerant input、Rear drive protection、Local shutdown mode、Live insertion protection SC-70-5 Logic Gates ROHS.

PCBKit's library has its KiCad symbol (74xGxx:74LVC1G08, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-353_SC-70-5, from KiCad's library), ready for a KiCad board. 330,544 are in stock at JLCPCB (part C7832). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

123GND45VCC
74xGxx:74LVC1G08From KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-353_SC-70-5From KiCad's library

From the datasheet

11
Supply, least
1.65 V · VCC, recommended operating min · p. 5
Supply, most
5.5 V · VCC, recommended operating max · p. 5
Supply, absolute maximum
6.5 V · VCC, absolute max · p. 4
Works from
-40 °C · Operating free-air temperature min · p. 5
Works up to
125 °C · Operating free-air temperature max · p. 5
Junction, hottest
150 °C · Junction temperature absolute max · p. 4
Takes working
10 µA · VCC supply current max, VI = 5.5V or GND, IO = 0 · p. 6
A pin gives at most
50 mA · Continuous output source or sink current absolute max · p. 4
Junction to air (DCK (SOT-SC70))
371 K/W · Junction-to-ambient thermal resistance · p. 5
Junction to board (DCK (SOT-SC70))
258.6 K/W · Junction-to-board thermal resistance · p. 5
Junction to case (DCK (SOT-SC70))
297.5 K/W · Junction-to-case top thermal resistance · p. 5

What it is and has

9
Logic function
Single 2-input positive-AND gate · p. 1
Supply operation
Supports 5V VCC operation · p. 1
Input voltage tolerance
5.5V · p. 1
Voltage translation
Down translation to VCC · p. 1
Propagation delay
Maximum 3.6ns at 3.3V · p. 1
Supply current
10μA maximum ICC · p. 1
Output drive
±24mA at 3.3V · p. 1
Output structure
Balanced CMOS push-pull outputs · p. 10
Partial power down
Outputs disabled when supply pin is held at 0V · p. 10

Around it

3
cap 0.1μF
between VCC and GND; Bypass capacitor at each VCC terminal; place near the positive supply terminal with a short ground return path. · p. 14
cap 1μF
between VCC and GND; Commonly used in parallel with 0.1uF to reject different noise frequencies. · p. 14
res 10kΩ
between A or B and VCC or GND; Pull-up or pull-down for an input that is not always driven. · p. 10

Specifications

81
ParameterConditionsAs printedPage
Supply voltage range VCCOver operating free-air temperature rangemin -0.5 · max 6.5 V4
Input voltage range VIOver operating free-air temperature rangemin -0.5 · max 6.5 V4
Voltage range applied to any output in the high-impedance or power-off state VOOver operating free-air temperature rangemin -0.5 · max 6.5 V4
Voltage range applied to any output in the high or low state VOOver operating free-air temperature rangemin -0.5 V4
Input clamp current IIKVI < 0max -50 mA4
Output clamp current IOKVO < 0max -50 mA4
Junction temperature TJ(max)max 150 °C4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pinsmin 0 · max 2000 V4
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pinsmin 0 · max 1000 V4
Supply voltage VCCOperatingmin 1.65 · max 5.5 V5
Supply voltage VCCData retention onlymin 1.5 V5
High-level input voltage VIHVCC = 2.3V to 2.7Vmin 1.7 V5
High-level input voltage VIHVCC = 3V to 3.6Vmin 2 V5
Low-level input voltage VILVCC = 2.3V to 2.7Vmax 0.7 V5
Low-level input voltage VILVCC = 3V to 3.6Vmax 0.8 V5
Input voltage VImin 0 · max 5.5 V5
Output voltage VOmin 0 V5
High-level output current IOHVCC = 1.65Vmax -4 mA5
High-level output current IOHVCC = 2.3Vmax -8 mA5
High-level output current IOHVCC = 3Vmax -16 mA5
High-level output current IOHVCC = 3Vmax -24 mA5
High-level output current IOHVCC = 4.5Vmax -32 mA5
Low-level output current IOLVCC = 1.65Vmax 4 mA5
Low-level output current IOLVCC = 2.3Vmax 8 mA5
Low-level output current IOLVCC = 3Vmax 16 mA5
Low-level output current IOLVCC = 3Vmax 24 mA5
Low-level output current IOLVCC = 4.5Vmax 32 mA5
Input transition rise or fall rate Δt/ΔvVCC = 1.8V ± 0.15V, 2.5V ± 0.2Vmax 20 ns/V5
Input transition rise or fall rate Δt/ΔvVCC = 3.3V ± 0.3Vmax 10 ns/V5
Input transition rise or fall rate Δt/ΔvVCC = 5V ± 0.5Vmax 5 ns/V5
Operating free-air temperature TAmin -40 · max 125 °C5
Junction-to-ambient thermal resistance RθJADCK (SOT-SC70), 5 pinstyp 371 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)DCK (SOT-SC70), 5 pinstyp 297.5 °C/W5
Junction-to-board thermal resistance RθJBDCK (SOT-SC70), 5 pinstyp 258.6 °C/W5
Junction-to-top characterization parameter ΨJTDCK (SOT-SC70), 5 pinstyp 195.6 °C/W5
Junction-to-board characterization parameter ΨJBDCK (SOT-SC70), 5 pinstyp 256.2 °C/W5
VOH VOHIOH = –4mA; VCC = 1.65V; –40°C to 85°Cmin 1.2 V6
VOH VOHIOH = –4mA; VCC = 1.65V; –40°C to 125°Cmin 1.2 V6
VOH VOHIOH = –8mA; VCC = 2.3V; –40°C to 85°Cmin 1.9 V6
VOH VOHIOH = –8mA; VCC = 2.3V; –40°C to 125°Cmin 1.9 V6
VOH VOHIOH = –16mA; VCC = 3V; –40°C to 85°Cmin 2.4 V6
VOH VOHIOH = –16mA; VCC = 3V; –40°C to 125°Cmin 2.4 V6
VOH VOHIOH = –24mA; VCC = 3V; –40°C to 85°Cmin 2.3 V6
VOH VOHIOH = –24mA; VCC = 3V; –40°C to 125°Cmin 2.3 V6
VOH VOHIOH = –32mA; VCC = 4.5V; –40°C to 85°Cmin 3.8 V6
VOH VOHIOH = –32mA; VCC = 4.5V; –40°C to 125°Cmin 3.8 V6
VOL VOLIOL = 100uA; VCC = 1.65V to 5.5V; –40°C to 85°Cmax 0.1 V6
VOL VOLIOL = 100uA; VCC = 1.65V to 5.5V; –40°C to 125°Cmax 0.1 V6
VOL VOLIOL = 4mA; VCC = 1.65V; –40°C to 85°Cmax 0.45 V6
VOL VOLIOL = 4mA; VCC = 1.65V; –40°C to 125°Cmax 0.45 V6
VOL VOLIOL = 8mA; VCC = 2.3V; –40°C to 85°Cmax 0.3 V6
VOL VOLIOL = 8mA; VCC = 2.3V; –40°C to 125°Cmax 0.3 V6
VOL VOLIOL = 16mA; VCC = 3V; –40°C to 85°Cmax 0.4 V6
VOL VOLIOL = 16mA; VCC = 3V; –40°C to 125°Cmax 0.4 V6
VOL VOLIOL = 24mA; VCC = 3V; –40°C to 85°Cmax 0.55 V6
VOL VOLIOL = 24mA; VCC = 3V; –40°C to 125°Cmax 0.55 V6
VOL VOLIOL = 32mA; VCC = 4.5V; –40°C to 85°Cmax 0.55 V6
VOL VOLIOL = 32mA; VCC = 4.5V; –40°C to 125°Cmax 0.55 V6
ICC ICCVI = 5.5V or GND, IO = 0; VCC = 1.65V to 5.5V; –40°C to 85°Cmax 10 uA6
ICC ICCVI = 5.5V or GND, IO = 0; VCC = 1.65V to 5.5V; –40°C to 125°Cmax 10 uA6
ΔICC ΔICCOne input at VCC – 0.6V, other inputs at VCC or GND; VCC = 3V to 5.5V; –40°C to 85°Cmax 500 uA6
ΔICC ΔICCOne input at VCC – 0.6V, other inputs at VCC or GND; VCC = 3V to 5.5V; –40°C to 125°Cmax 500 uA6
Ci CiVI = VCC or GND; VCC = 3.3V; –40°C to 85°C column; typical at TA = 25°Ctyp 4 pF6
Ci CiVI = VCC or GND; VCC = 3.3V; –40°C to 125°C column; typical at TA = 25°Ctyp 4 pF6
tpd tpdA or B to Y; VCC = 1.8V ± 0.15V; –40°C to 85°Cmin 1.5 · max 7.2 ns6
tpd tpdA or B to Y; VCC = 2.5V ± 0.2V; –40°C to 85°Cmin 0.7 · max 4.4 ns6
tpd tpdA or B to Y; VCC = 3.3V ± 0.3V; –40°C to 85°Cmin 0.8 · max 3.6 ns6
tpd tpdA or B to Y; VCC = 5V ± 0.5V; –40°C to 85°Cmin 0.8 · max 3.4 ns6
tpd tpdA or B to Y; VCC = 1.8V ± 0.15V; –40°C to 85°Cmin 2.4 · max 8 ns6
tpd tpdA or B to Y; VCC = 1.8V ± 0.15V; –40°C to 125°Cmin 2.4 · max 10 ns6
tpd tpdA or B to Y; VCC = 2.5V ± 0.2V; –40°C to 85°Cmin 1.1 · max 5.5 ns6
tpd tpdA or B to Y; VCC = 2.5V ± 0.2V; –40°C to 125°Cmin 1.1 · max 7 ns6
tpd tpdA or B to Y; VCC = 3.3V ± 0.3V; –40°C to 85°C; CL = 30pF or 50pFmin 1 · max 4.5 ns7
tpd tpdA or B to Y; VCC = 3.3V ± 0.3V; –40°C to 125°C; CL = 30pF or 50pFmin 1 · max 6 ns7
tpd tpdA or B to Y; VCC = 5V ± 0.5V; –40°C to 85°C; CL = 30pF or 50pFmin 1 · max 4 ns7
tpd tpdA or B to Y; VCC = 5V ± 0.5V; –40°C to 125°C; CL = 30pF or 50pFmin 1 · max 5 ns7
Power dissipation capacitance Cpdf = 10MHz; VCC = 1.8V; TA = 25°Ctyp 21 pF7
Power dissipation capacitance Cpdf = 10MHz; VCC = 2.5V; TA = 25°Ctyp 24 pF7
Power dissipation capacitance Cpdf = 10MHz; VCC = 3.3V; TA = 25°Ctyp 26 pF7
Power dissipation capacitance Cpdf = 10MHz; VCC = 5V; TA = 25°Ctyp 31 pF7

Pins, by the datasheet

5
1 A
Input · p. 3
2 B
Input · p. 3
3 GND
Ground · p. 3
4 Y
Output · p. 3
5 VCC
Power pin · p. 3

Open-source boards using it

2
  • 6 layers68.9 × 47.5 mmMowi, the printed circuit board in 3D

    Mowi

    septentrio-gnss/mowi

    Mowi is an Open Source hardware project that combines a compact Septentrio's GNSS receiver mosaic with a wireless ESP32 Wrover module

    283 parts35
  • 4 layers150 × 120 mmPi usb port switch, the printed circuit board in 3D

    Pi usb port switch

    misko/prompt2device

    The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

    197 parts3MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SN74LVC1G08DCK?

Yes. The symbol is 74xGxx:74LVC1G08 and the footprint Package_TO_SOT_SMD:SOT-353_SC-70-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SN74LVC1G08DCK?

SC-70-5, with 5 pins. Its footprint is drawn on this page.

Where is the SN74LVC1G08DCK datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the SN74LVC1G08DCK?

JLCPCB lists it as part C7832, with 330,544 in stock; the sellers' links on this page open their listings.

What can replace the SN74LVC1G08DCK?

Parts like it in the library: the SN74LVC1G04DCKR-JSM by JSMSEMI, the NL17SZ08DF by onsemi, the SN74LVC1G17DCKR by TECH PUBLIC and the SN74LVC1G14DCKR(UMW) by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SN74LVC1G08DCK?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.