
SN74LVC1G07DBV
Texas InstrumentsExtended
-40℃~+125℃ 1 1 1.65V~5.5V 10uA 32mA 4.2ns@3.3V,50pF 74LVC Open-drain Power-off isolation、Level shifting Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHS
- Part id
- ti/SN74LVC1G07DBV
- Category
- Buffers, Drivers
- Package
- SOT-23-5
- Pins
- 5
- In stock
- 45,428 at JLCPCB (C7829)
- Used on
- 5 open-source boards
Overview
The SN74LVC1G07DBV is a buffers, Driver made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃ 1 1 1.65V~5.5V 10uA 32mA 4.2ns@3.3V,50pF 74LVC Open-drain Power-off isolation、Level shifting Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHS.
PCBKit's library has its KiCad symbol (74xGxx:74LVC1G07, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 45,428 are in stock at JLCPCB (part C7829). 5 open-source boards in 5 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
11- Supply, least
- 1.65 V · VCC, recommended operating min · p. 5
- Supply, most
- 5.5 V · VCC, recommended operating max · p. 5
- Supply, absolute maximum
- 6.5 V · VCC, absolute max · p. 4
- Works from
- -40 °C · Operating free-air temperature min, DBV · p. 5
- Works up to
- 125 °C · Operating free-air temperature max, DBV · p. 5
- Junction, hottest
- 150 °C · Junction temperature absolute max · p. 4
- Takes working
- 10 µA · VCC supply current max, VI = 5.5 V or GND, IO = 0 · p. 6
- A pin gives at most
- 50 mA · Continuous output current absolute max magnitude, ±50 mA · p. 4
- Junction to air (DBV)
- 357.1 K/W · Junction-to-ambient thermal resistance · p. 5
- Junction to case (DBV)
- 263.7 K/W · Junction-to-case (top) thermal resistance · p. 5
- Junction to board (DBV)
- 264.4 K/W · Junction-to-board thermal resistance · p. 5
What it is and has
5- Function
- Single buffer/driver with open-drain output · p. 1
- Level translation
- Can translate up or down · p. 1
- Propagation delay
- Maximum 4.2 ns at 3.3 V · p. 1
- Protection
- Ioff supports live insertion, partial-power-down mode, and back-drive protection · p. 1
- Package
- DBV (SOT-23, 5), nominal body 2.9 mm × 1.6 mm · p. 1
Around it
2- cap 0.1-μF
- between VCC and GND; Recommended bypass capacitor for a single supply; install as close to the power pin as possible. · p. 11
- cap 1-μF
- between VCC and GND; Commonly used in parallel with the 0.1-uF bypass capacitor to reject different noise frequencies. · p. 11
Specifications
70| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage range VCC | Over operating free-air temperature range | min -0.5 · max 6.5 V | 4 |
| Input voltage range VI | Over operating free-air temperature range; negative-voltage rating may be exceeded if input current rating is observed | min -0.5 · max 6.5 V | 4 |
| Voltage range applied to any output in the high-impedance or power-off state VO | Over operating free-air temperature range; negative-voltage rating may be exceeded if output current rating is observed | min -0.5 · max 6.5 V | 4 |
| Voltage range applied to any output in the high or low state VO | Over operating free-air temperature range; see footnotes (2) and (3) | min -0.5 · max 6.5 V | 4 |
| Input clamp current IIK | VI < 0 | max -50 mA | 4 |
| Output clamp current IOK | VO < 0 | max -50 mA | 4 |
| Continuous output current IO | Over operating free-air temperature range; ± rating | max 50 mA | 4 |
| Continuous current through VCC or GND | Over operating free-air temperature range; ± rating | max 100 mA | 4 |
| Storage temperature range Tstg | min -65 · max 150 °C | 4 | |
| Junction temperature range Tj | max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins | min 0 · max 2000 V | 4 |
| Electrostatic discharge V(ESD) | Charged device model (CDM), per JEDEC specification JESD22-C101, all pins | min 0 · max 1000 V | 4 |
| Supply voltage VCC | Operating | min 1.65 · max 5.5 V | 5 |
| Supply voltage VCC | Data retention only | min 1.5 V | 5 |
| High-level input voltage VIH | VCC = 2.3 V to 2.7 V | min 1.7 V | 5 |
| High-level input voltage VIH | VCC = 3 V to 3.6 V | min 2 V | 5 |
| Low-level input voltage VIL | VCC = 2.3 V to 2.7 V | max 0.7 V | 5 |
| Low-level input voltage VIL | VCC = 3 V to 3.6 V | max 0.8 V | 5 |
| Input voltage VI | min 0 · max 5.5 V | 5 | |
| Output voltage VO | min 0 · max 5.5 V | 5 | |
| Low-level output current IOL | VCC = 1.65 V | max 4 mA | 5 |
| Low-level output current IOL | VCC = 2.3 V | max 8 mA | 5 |
| Low-level output current IOL | VCC = 3 V | max 16 mA | 5 |
| Low-level output current IOL | VCC = 3 V | max 24 mA | 5 |
| Low-level output current IOL | VCC = 4.5 V | max 32 mA | 5 |
| Input transition rise or fall rate Δt/Δv | VCC = 1.8 V ± 0.15 V, 2.5 V ± 0.2 V | max 20 ns/V | 5 |
| Input transition rise or fall rate Δt/Δv | VCC = 3.3 V ± 0.3 V | max 10 ns/V | 5 |
| Input transition rise or fall rate Δt/Δv | VCC = 5 V ± 0.5 V | max 5 ns/V | 5 |
| Operating free-air temperature TA | DBV; All other packages | min -40 · max 125 °C | 5 |
| Junction-to-ambient thermal resistance RθJA | DBV, 5 PINS | typ 357.1 °C/W | 5 |
| Junction-to-case (top) thermal resistance RθJC(top) | DBV, 5 PINS | typ 263.7 °C/W | 5 |
| Junction-to-board thermal resistance RθJB | DBV, 5 PINS | typ 264.4 °C/W | 5 |
| Junction-to-top characterization parameter ψJT | DBV, 5 PINS | typ 195.6 °C/W | 5 |
| Junction-to-board characterization parameter ψJB | DBV, 5 PINS | typ 262.2 °C/W | 5 |
| VOL VOL | IOL = 100 uA; VCC = 1.65 V to 5.5 V; –40°C to 85°C | max 0.1 V | 6 |
| VOL VOL | IOL = 100 uA; VCC = 1.65 V to 5.5 V; –40°C to 125°C | max 0.1 V | 6 |
| VOL VOL | IOL = 4 mA; VCC = 1.65 V; –40°C to 85°C | max 0.45 V | 6 |
| VOL VOL | IOL = 4 mA; VCC = 1.65 V; –40°C to 125°C | max 0.45 V | 6 |
| VOL VOL | IOL = 8 mA; VCC = 2.3 V; –40°C to 85°C | max 0.3 V | 6 |
| VOL VOL | IOL = 8 mA; VCC = 2.3 V; –40°C to 125°C | max 0.3 V | 6 |
| VOL VOL | IOL = 16 mA; VCC = 3 V; –40°C to 85°C | max 0.4 V | 6 |
| VOL VOL | IOL = 16 mA; VCC = 3 V; –40°C to 125°C | max 0.4 V | 6 |
| VOL VOL | IOL = 24 mA; VCC = 3 V; –40°C to 85°C | max 0.55 V | 6 |
| VOL VOL | IOL = 24 mA; VCC = 3 V; –40°C to 125°C | max 0.55 V | 6 |
| VOL VOL | IOL = 32 mA; VCC = 4.5 V; –40°C to 85°C | max 0.55 V | 6 |
| VOL VOL | IOL = 32 mA; VCC = 4.5 V; –40°C to 125°C | max 0.55 V | 6 |
| A input II | VI = 5.5 V or GND; VCC = 0 to 5.5 V; –40°C to 85°C; ± limit | max 5 uA | 6 |
| A input II | VI = 5.5 V or GND; VCC = 0 to 5.5 V; –40°C to 125°C; ± limit | max 5 uA | 6 |
| Ioff Ioff | VI or VO = 5.5 V; VCC = 0; –40°C to 85°C; ± limit | max 10 uA | 6 |
| Ioff Ioff | VI or VO = 5.5 V; VCC = 0; –40°C to 125°C; ± limit | max 10 uA | 6 |
| ICC ICC | VI = 5.5 V or GND, IO = 0; VCC = 1.65 V to 5.5 V; –40°C to 85°C | max 10 uA | 6 |
| ICC ICC | VI = 5.5 V or GND, IO = 0; VCC = 1.65 V to 5.5 V; –40°C to 125°C | max 10 uA | 6 |
| ΔICC ΔICC | One input at VCC – 0.6 V, Other inputs at VCC or GND; VCC = 3 V to 5.5 V; –40°C to 85°C | max 500 uA | 6 |
| ΔICC ΔICC | One input at VCC – 0.6 V, Other inputs at VCC or GND; VCC = 3 V to 5.5 V; –40°C to 125°C | max 500 uA | 6 |
| Ci Ci | VI = VCC or GND; VCC = 3.3 V; –40°C to 85°C column; typical at TA = 25°C | typ 4 pF | 6 |
| Ci Ci | VI = VCC or GND; VCC = 3.3 V; –40°C to 125°C column; typical at TA = 25°C | typ 4 pF | 6 |
| Co Co | VO = VCC or GND; VCC = 3.3 V; –40°C to 85°C column; typical at TA = 25°C | typ 5 pF | 6 |
| Co Co | VO = VCC or GND; VCC = 3.3 V; –40°C to 125°C column; typical at TA = 25°C | typ 5 pF | 6 |
| tpd tpd | A to Y; VCC = 1.8 V ± 0.15 V | min 2.4 · max 8.3 ns | 6 |
| tpd tpd | A to Y; VCC = 2.5 V ± 0.2 V | min 1 · max 5.5 ns | 6 |
| tpd tpd | A to Y; VCC = 3.3 V ± 0.3 V | min 1.5 · max 4.2 ns | 6 |
| tpd tpd | A to Y; VCC = 5 V ± 0.5 V | min 1 · max 3.5 ns | 6 |
| tpd tpd | A to Y; VCC = 1.8 V ± 0.15 V | min 2.4 · max 8.6 ns | 6 |
| tpd tpd | A to Y; VCC = 2.5 V ± 0.2 V | min 1 · max 6 ns | 6 |
| tpd tpd | A to Y; VCC = 3.3 V ± 0.3 V | min 1.5 · max 4.7 ns | 6 |
| tpd tpd | A to Y; VCC = 5 V ± 0.5 V | min 1 · max 4 ns | 6 |
| Power dissipation capacitance Cpd | TA = 25°C; f = 10 MHz; VCC = 1.8 V | typ 3 pF | 6 |
| Power dissipation capacitance Cpd | TA = 25°C; f = 10 MHz; VCC = 2.5 V | typ 3 pF | 6 |
| Power dissipation capacitance Cpd | TA = 25°C; f = 10 MHz; VCC = 3.3 V | typ 4 pF | 6 |
| Power dissipation capacitance Cpd | TA = 25°C; f = 10 MHz; VCC = 5 V | typ 6 pF | 6 |
Pins, by the datasheet
5- 1 NC
- Not connected. · p. 3
- 2 A
- Input. · p. 3
- 3 GND
- Ground. · p. 3
- 4 Y
- Open-drain output. · p. 3
- 5 VCC
- Power pin. · p. 3
Open-source boards using it
5- 4 layers35.6 × 17.8 mm

- 2 layers110.5 × 104.1 mm

Pjc kicad
jdeguire/pjcontroller
Hardware and software for controlling your homebuilt video-beaming creation.
89 partsGPL-3.0 - 2 layers75 × 65 mm

Motormodul
Meo98/picostack
Stackable, contract-driven module system for the Raspberry Pi Pico — open hardware, built by code
63 partsGPL-3.0 - 4 layers75 × 50 mm

- 2 layers41 × 51 mm

Parts like it
1Questions
Is there a KiCad symbol and footprint for the SN74LVC1G07DBV?
Yes. The symbol is 74xGxx:74LVC1G07 and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the SN74LVC1G07DBV?
SOT-23-5, with 5 pins. Its footprint is drawn on this page.
Where is the SN74LVC1G07DBV datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the SN74LVC1G07DBV?
JLCPCB lists it as part C7829, with 45,428 in stock; the sellers' links on this page open their listings.
What can replace the SN74LVC1G07DBV?
Parts like it in the library: the SN74AUP1G07DBVRE4 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the SN74LVC1G07DBV?
5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.