
SN74LVC1G00DBV
Texas InstrumentsExtended
-40℃~+125℃ 1 1.2V、1.9V、2.3V、2.4V、3.8V 1.65V~5.5V 1.7V~2V 10uA 2 300mV、400mV、450mV、550mV 32mA 32mA 4.3ns@5V,50pF 74LVC Series NAND Gate Overvoltage-tolerant input、Rear drive protection、Local shutdown mode、Live insertion protection SOT-23-5 Logic Gates ROHS
- Part id
- ti/SN74LVC1G00DBV
- Category
- Logic Gates
- Package
- SOT-23-5
- Pins
- 5
- In stock
- 21,170 at JLCPCB (C7826)
- Used on
- 3 open-source boards
Overview
The SN74LVC1G00DBV is a logic Gate made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃ 1 1.2V、1.9V、2.3V、2.4V、3.8V 1.65V~5.5V 1.7V~2V 10uA 2 300mV、400mV、450mV、550mV 32mA 32mA 4.3ns@5V,50pF 74LVC Series NAND Gate Overvoltage-tolerant input、Rear drive protection、Local shutdown mode、Live insertion protection SOT-23-5 Logic Gates ROHS.
PCBKit's library has its KiCad symbol (74xGxx:SN74LVC1G00DBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 21,170 are in stock at JLCPCB (part C7826). 3 open-source boards in 3 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
10- Supply, least
- 1.65 V · VCC, recommended operating min · p. 5
- Supply, most
- 5.5 V · VCC, recommended operating max · p. 5
- Supply, absolute maximum
- 6.5 V · VCC, absolute max · p. 4
- Works from
- -40 °C · Operating free-air temperature min · p. 5
- Works up to
- 125 °C · Operating free-air temperature max · p. 5
- Takes working
- 10 µA · VCC supply current max, IO = 0, VI = 5.5V or GND · p. 6
- A pin gives at most
- 50 mA · Continuous output source or sink current absolute max · p. 4
- Junction to air (DBV (SOT-23))
- 357.1 K/W · Junction-to-ambient thermal resistance · p. 5
- Junction to board (DBV (SOT-23))
- 264.4 K/W · Junction-to-board thermal resistance · p. 5
- Junction to case (DBV (SOT-23))
- 263.7 K/W · Junction-to-case top thermal resistance · p. 5
What it is and has
6- Logic function
- Single 2-input positive-NAND gate · p. 1
- 5V operation
- Supports 5V VCC operation · p. 1
- Input voltage tolerance
- 5.5V · p. 1
- Voltage translation
- Down translation to VCC · p. 1
- Propagation delay
- 3.8ns max at 3.3V · p. 1
- Output drive
- ±24mA at 3.3V · p. 1
Around it
3- cap 0.1μF
- between VCC and GND; Bypass capacitor at each VCC terminal; place near the positive supply terminal with a short ground return. · p. 14
- cap 1μF
- between VCC and GND; Commonly used in parallel with 0.1uF to reject different noise frequencies. · p. 14
- res 10kΩ
- between A or B and VCC or GND; Pull-up or pull-down for an input that is not always driven. · p. 10
Specifications
80| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage range VCC | Over operating free-air temperature range | min -0.5 · max 6.5 V | 4 |
| Input voltage range VI | Over operating free-air temperature range | min -0.5 · max 6.5 V | 4 |
| Voltage range applied to any output in the high-impedance or power-off state VO | Over operating free-air temperature range | min -0.5 · max 6.5 V | 4 |
| Voltage range applied to any output in the high or low state VO | Over operating free-air temperature range | min -0.5 V | 4 |
| Input clamp current IIK | VI < 0 | max -50 mA | 4 |
| Output clamp current IOK | VO < 0 | max -50 mA | 4 |
| Storage temperature Tstg | min -65 · max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 | min 0 · max 2000 V | 4 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per ANSI/ESDA/JEDEC JS-002 | min 0 · max 1000 V | 4 |
| Supply voltage VCC | Operating | min 1.65 · max 5.5 V | 5 |
| Supply voltage VCC | Data retention only | min 1.5 V | 5 |
| High-level input voltage VIH | VCC = 2.3V to 2.7V | min 1.7 V | 5 |
| High-level input voltage VIH | VCC = 3V to 3.6V | min 2 V | 5 |
| Low-level input voltage VIL | VCC = 2.3V to 2.7V | max 0.7 V | 5 |
| Low-level input voltage VIL | VCC = 3V to 3.6V | max 0.8 V | 5 |
| Input voltage VI | min 0 · max 5.5 V | 5 | |
| Output voltage VO | min 0 V | 5 | |
| High-level output current IOH | VCC = 1.65V | max -4 mA | 5 |
| High-level output current IOH | VCC = 2.3V | max -8 mA | 5 |
| High-level output current IOH | VCC = 3V | max -16 mA | 5 |
| High-level output current IOH | VCC = 3V | max -24 mA | 5 |
| High-level output current IOH | VCC = 4.5V | max -32 mA | 5 |
| Low-level output current IOL | VCC = 1.65V | max 4 mA | 5 |
| Low-level output current IOL | VCC = 2.3V | max 8 mA | 5 |
| Low-level output current IOL | VCC = 3V | max 16 mA | 5 |
| Low-level output current IOL | VCC = 3V | max 24 mA | 5 |
| Low-level output current IOL | VCC = 4.5V | max 32 mA | 5 |
| Input transition rise or fall rate Δt/Δv | VCC = 1.8V ± 0.15V, 2.5V ± 0.2V | max 20 ns/V | 5 |
| Input transition rise or fall rate Δt/Δv | VCC = 3.3V ± 0.3V | max 10 ns/V | 5 |
| Input transition rise or fall rate Δt/Δv | VCC = 5V ± 0.5V | max 5 ns/V | 5 |
| Operating free-air temperature TA | min -40 · max 125 °C | 5 | |
| RθJA RθJA | DBV (SOT-23), 5 pins | typ 357.1 °C/W | 5 |
| RθJC(top) RθJC(top) | DBV (SOT-23), 5 pins | typ 263.7 °C/W | 5 |
| RθJB RθJB | DBV (SOT-23), 5 pins | typ 264.4 °C/W | 5 |
| ΨJT ΨJT | DBV (SOT-23), 5 pins | typ 195.6 °C/W | 5 |
| ΨJB ΨJB | DBV (SOT-23), 5 pins | typ 262.2 °C/W | 5 |
| VOH VOH | IOH = –4mA; VCC = 1.65V; –40°C to 85°C | min 1.2 V | 6 |
| VOH VOH | IOH = –4mA; VCC = 1.65V; –40°C to 125°C | min 1.2 V | 6 |
| VOH VOH | IOH = –8mA; VCC = 2.3V; –40°C to 85°C | min 1.9 V | 6 |
| VOH VOH | IOH = –8mA; VCC = 2.3V; –40°C to 125°C | min 1.9 V | 6 |
| VOH VOH | IOH = –16mA; VCC = 3V; –40°C to 85°C | min 2.4 V | 6 |
| VOH VOH | IOH = –16mA; VCC = 3V; –40°C to 125°C | min 2.4 V | 6 |
| VOH VOH | IOH = –24mA; VCC = 3V; –40°C to 85°C | min 2.3 V | 6 |
| VOH VOH | IOH = –24mA; VCC = 3V; –40°C to 125°C | min 2.3 V | 6 |
| VOH VOH | IOH = –32mA; VCC = 4.5V; –40°C to 85°C | min 3.8 V | 6 |
| VOH VOH | IOH = –32mA; VCC = 4.5V; –40°C to 125°C | min 3.8 V | 6 |
| VOL VOL | IOL = 100uA; VCC = 1.65V to 5.5V; –40°C to 85°C | max 0.1 V | 6 |
| VOL VOL | IOL = 100uA; VCC = 1.65V to 5.5V; –40°C to 125°C | max 0.1 V | 6 |
| VOL VOL | IOL = 4mA; VCC = 1.65V; –40°C to 85°C | max 0.45 V | 6 |
| VOL VOL | IOL = 4mA; VCC = 1.65V; –40°C to 125°C | max 0.45 V | 6 |
| VOL VOL | IOL = 8mA; VCC = 2.3V; –40°C to 85°C | max 0.3 V | 6 |
| VOL VOL | IOL = 8mA; VCC = 2.3V; –40°C to 125°C | max 0.3 V | 6 |
| VOL VOL | IOL = 16mA; VCC = 3V; –40°C to 85°C | max 0.4 V | 6 |
| VOL VOL | IOL = 16mA; VCC = 3V; –40°C to 125°C | max 0.4 V | 6 |
| VOL VOL | IOL = 24mA; VCC = 3V; –40°C to 85°C | max 0.55 V | 6 |
| VOL VOL | IOL = 24mA; VCC = 3V; –40°C to 125°C | max 0.55 V | 6 |
| VOL VOL | IOL = 32mA; VCC = 4.5V; –40°C to 85°C | max 0.55 V | 6 |
| VOL VOL | IOL = 32mA; VCC = 4.5V; –40°C to 125°C | max 0.55 V | 6 |
| ICC ICC | VI = 5.5V or GND; IO = 0; VCC = 1.65V to 5.5V; –40°C to 85°C | max 10 uA | 6 |
| ICC ICC | VI = 5.5V or GND; IO = 0; VCC = 1.65V to 5.5V; –40°C to 125°C | max 10 uA | 6 |
| ΔICC ΔICC | One input at VCC – 0.6V, other inputs at VCC or GND; VCC = 3V to 5.5V; –40°C to 85°C | max 500 uA | 6 |
| ΔICC ΔICC | One input at VCC – 0.6V, other inputs at VCC or GND; VCC = 3V to 5.5V; –40°C to 125°C | max 500 uA | 6 |
| Ci Ci | VI = VCC or GND; VCC = 3.3V; –40°C to 85°C column; typical at TA = 25°C | typ 4 pF | 6 |
| Ci Ci | VI = VCC or GND; VCC = 3.3V; –40°C to 125°C column; typical at TA = 25°C | typ 4 pF | 6 |
| tpd tpd | A or B to Y; VCC = 1.8V ± 0.15V; –40°C to 85°C; CL = 15pF | min 2.2 · max 7.2 ns | 6 |
| tpd tpd | A or B to Y; VCC = 2.5V ± 0.2V; –40°C to 85°C; CL = 15pF | min 0.9 · max 4.4 ns | 6 |
| tpd tpd | A or B to Y; VCC = 3.3V ± 0.3V; –40°C to 85°C; CL = 15pF | min 0.8 · max 3.8 ns | 6 |
| tpd tpd | A or B to Y; VCC = 5V ± 0.5V; –40°C to 85°C; CL = 15pF | min 0.8 · max 3.4 ns | 6 |
| tpd tpd | A or B to Y; VCC = 1.8V ± 0.15V; CL = 30pF or 50pF | min 3.1 · max 9 ns | 6 |
| tpd tpd | A or B to Y; VCC = 2.5V ± 0.2V; CL = 30pF or 50pF | min 1.3 · max 5.5 ns | 6 |
| tpd tpd | A or B to Y; VCC = 3.3V ± 0.3V; CL = 30pF or 50pF | min 1 · max 4.7 ns | 6 |
| tpd tpd | A or B to Y; VCC = 5V ± 0.5V; CL = 30pF or 50pF | min 1 · max 4 ns | 6 |
| tpd tpd | A or B to Y; VCC = 1.8V ± 0.15V; CL = 30pF or 50pF | min 3.1 · max 9.7 ns | 7 |
| tpd tpd | A or B to Y; VCC = 2.5V ± 0.2V; CL = 30pF or 50pF | min 1.3 · max 5.8 ns | 7 |
| tpd tpd | A or B to Y; VCC = 3.3V ± 0.3V; CL = 30pF or 50pF | min 1 · max 5 ns | 7 |
| tpd tpd | A or B to Y; VCC = 5V ± 0.5V; CL = 30pF or 50pF | min 1 · max 4.3 ns | 7 |
| Power dissipation capacitance Cpd | TA = 25°C; f = 10MHz; VCC = 1.8V | typ 22 pF | 7 |
| Power dissipation capacitance Cpd | TA = 25°C; f = 10MHz; VCC = 2.5V | typ 22 pF | 7 |
| Power dissipation capacitance Cpd | TA = 25°C; f = 10MHz; VCC = 3.3V | typ 23 pF | 7 |
| Power dissipation capacitance Cpd | TA = 25°C; f = 10MHz; VCC = 5V | typ 25 pF | 7 |
Pins, by the datasheet
5- 1 A
- Input. · p. 3
- 2 B
- Input. · p. 3
- 3 GND
- Ground. · p. 3
- 4 Y
- Output. · p. 3
- 5 VCC
- Power pin. · p. 3
Open-source boards using it
3- 2 layers26.8 × 10 mm

- 2 layers51.9 × 52 mm

- 2 layers74 × 61 mm

F44ret6
KemalOeztuerk/STM32F446_Control_Board
STM32F446RET6 control board for UAV/robotics: CAN (SN65HVD230), hardware-inverted SBUS input, 4x PWM, 2x quadrature encoder, 4x ADC, SPI/UART/SWD headers — 2-layer KiCad design
45 parts
Parts like it
8SN74LVC1G04DBVR-JSM
SOT-23-5LSOT-23-5L Logic Gates ROHSJSMSEMILogic GatesSN74LVC1G132DBV
SOT-23-5-40℃~+125℃ 1 1.16V~3.33V 1.65V~5.5V 10uA 2 2.3V、3.8V 32mA 32mA 5.3ns@3.3V,15pF 550mV 74LVC Series Local shutdown mode NAND Gate SOT-23-5 Logic Gates ROHSTexas InstrumentsLogic GatesSN74AHC1G04DBVR
SOT-23-5-49℃~+125℃ 1 1 1.5V、2.1V、3.85V 1.9V、2.58V、3.94V 100mV、360mV 1uA 2V~5.5V 500mV、900mV、1.65V 7.5ns@5V,50pF、10.6ns@3.3V,50pF 74AHC 8mA 8mA SOT-23-5 Inverters ROHSTECH PUBLICLogic GatesSN74LVC1G04DBVR
SOT-23-5-40℃~+125℃ 1 1 1.2V、1.9V、2.2V、2.3V、3.8V 1.65V~5.5V 100mV、300mV、400mV、450mV、550mV 10uA 24mA 24mA 74LVC 7ns@5V,50pF SOT-23-5 Inverters ROHSTECH PUBLICLogic GatesSN74AHC1G09DBV
SOT-23-5-55℃~+125℃ 1 1.5V~3.85V 1uA 2 2V~5.5V 500mV~1.65V 650mV 7.5ns@5V,50pF 74AHC Series 8mA AND Gate Open-drain Overvoltage-tolerant input Schmitt trigger SOT-23-5 Logic Gates ROHSTexas InstrumentsLogic Gates74AHC1G14GV
SOT-23-5-40℃~+125℃ 1 1 1.2V~2.2V、1.75V~3.15V、2.15V~3.85V 16.3ns@3.3V,15pF 2V~5.5V 40uA 74AHC 8mA 8mA 900mV~1.9V、1.35V~2.75V、1.65V~3.35V SOT-23-5 Logic Gates ROHSTECH PUBLICLogic Gates74LVC1G14GV
SOT-23-5-40℃~+125℃ 1 1 1.2V~1.54V、1.9V~2.15V、2.2V~2.5V、2.3V~2.62V、3.8V~4.11V 1.65V~5.5V 10uA 24mA 24mA 300mV~450mV、400mV~600mV、450mV~700mV、550mV~800mV、550mV~800mV 6ns@4.5V,50pF、7ns@3V,50pF、8ns@2.7V,50pF、9ns@2.3V,30pF、13ns@1.65V,30pF 74LVC SOT-23-5 Inverters ROHSTECH PUBLICLogic GatesSN74AHC1G14DBVR
SOT-23-5-40℃~+125℃ 1 1 14ns@5V,50pF 1uA 2V~5.5V 74AHC 8mA 8mA SOT-23-5 Logic Gates ROHSTECH PUBLICLogic Gates
Questions
Is there a KiCad symbol and footprint for the SN74LVC1G00DBV?
Yes. The symbol is 74xGxx:SN74LVC1G00DBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the SN74LVC1G00DBV?
SOT-23-5, with 5 pins. Its footprint is drawn on this page.
Where is the SN74LVC1G00DBV datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the SN74LVC1G00DBV?
JLCPCB lists it as part C7826, with 21,170 in stock; the sellers' links on this page open their listings.
What can replace the SN74LVC1G00DBV?
Parts like it in the library: the SN74LVC1G04DBVR-JSM by JSMSEMI, the SN74LVC1G132DBV by Texas Instruments, the SN74AHC1G04DBVR by TECH PUBLIC and the SN74LVC1G04DBVR by TECH PUBLIC. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the SN74LVC1G00DBV?
3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.