SN74HCT74D
Texas InstrumentsExtended
-40℃~+85℃ 0ns 1 14ns 18ns@5.5V,50pF 2 3pF 4.5V~5.5V 46MHz 4mA 4mA 4uA 74HCT Series Asynchronous Complementary D-Type Rising Edge Set and Reset SOIC-14 Flip Flops ROHS
- Part id
- ti/SN74HCT74D
- Category
- Flip Flops
- Package
- SOIC-14
- Pins
- 14
- In stock
- 10,839 at JLCPCB (C352961)
Overview
The SN74HCT74D is a flip Flop made by Texas Instruments in a SOIC-14 package with 14 pins. -40℃~+85℃ 0ns 1 14ns 18ns@5.5V,50pF 2 3pF 4.5V~5.5V 46MHz 4mA 4mA 4uA 74HCT Series Asynchronous Complementary D-Type Rising Edge Set and Reset SOIC-14 Flip Flops ROHS.
PCBKit's library has its KiCad symbol (74xx:74HCT74, from KiCad's library) and its footprint (Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, from KiCad's library), ready for a KiCad board. 10,839 are in stock at JLCPCB (part C352961).
Symbol
Footprint
From the datasheet
12- Supply, least
- 4.5 V · VCC, recommended operating min · p. 4
- Supply, most
- 5.5 V · VCC, recommended operating max · p. 4
- Supply, absolute maximum
- 7 V · VCC, absolute max · p. 4
- Works from
- -40 °C · Operating free-air temperature min · p. 4
- Works up to
- 85 °C · Operating free-air temperature max · p. 4
- Junction, hottest
- 150 °C · Junction temperature absolute max · p. 4
- Takes working
- 40 µA · VCC supply current max, 5.5 V, inputs at rails, no output load · p. 5
- A pin gives at most
- 25 mA · Continuous output source or sink current absolute max · p. 4
- Junction to air (D (SOIC))
- 138.7 K/W · Junction-to-ambient thermal resistance · p. 4
- Junction to case (D (SOIC))
- 93.8 K/W · Junction-to-case top thermal resistance · p. 4
- Junction to board (D (SOIC))
- 94.7 K/W · Junction-to-board thermal resistance · p. 4
- Edge
- 7 ns · Output transition time typical, VCC = 5.5 V, TA = 25°C, CL = 50 pF · p. 6
What it is and has
4- Function
- Dual D-type positive-edge-triggered flip-flop with clear and preset · p. 1
- Output fanout
- Up to 10 LSTTL loads · p. 1
- Output drive
- ±4 mA at 5 V · p. 1
- Input compatibility
- TTL voltage levels · p. 1
Around it
2- cap 0.1 μF
- between VCC and GND; Bypass each VCC terminal; install as close to the power terminal as possible. · p. 9
- cap 1 μF
- between VCC and GND; Commonly used in parallel with the 0.1-uF bypass capacitor to reject different noise frequencies. · p. 9
Specifications
76| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage range VCC | Over operating free-air temperature range | min -0.5 · max 7 V | 4 |
| Input clamp current(2) IIK | VI < 0 or VI > VCC; bipolar limit ±20 mA | min -20 · max 20 mA | 4 |
| Output clamp current(2) IOK | VO < 0 or VO > VCC; bipolar limit ±20 mA | min -20 · max 20 mA | 4 |
| Continuous output current IO | VO = 0 to VCC; bipolar limit ±25 mA | min -25 · max 25 mA | 4 |
| Continuous current through VCC or GND | Bipolar limit ±50 mA | min -50 · max 50 mA | 4 |
| Junction temperature TJ | max 150 ℃ | 4 | |
| Storage temperature range Tstg | min -65 · max 150 ℃ | 4 | |
| Supply voltage VCC | SN74HCT74; nominal 5 V | min 4.5 · max 5.5 V | 4 |
| High-level input voltage VIH | SN74HCT74; Vcc = 4.5 V to 5.5 V | min 2 V | 4 |
| Low-level input voltage VIL | SN74HCT74; Vcc = 4.5 V to 5.5 V | max 0.8 V | 4 |
| Input voltage VI | SN74HCT74; maximum VCC | min 0 V | 4 |
| Output voltage VO | SN74HCT74; maximum VCC | min 0 V | 4 |
| Input transition rise/fall time Δt/Δv | SN74HCT74 | max 500 ns | 4 |
| Operating free-air temperature TA | SN74HCT74 | min -40 · max 85 °C | 4 |
| Junction-to-ambient thermal resistance RθJA | D (SOIC), 14 PINS | typ 138.7 °C/W | 4 |
| Junction-to-case (top) thermal resistance RθJC (top) | D (SOIC), 14 PINS | typ 93.8 °C/W | 4 |
| Junction-to-board thermal resistance RθJB | D (SOIC), 14 PINS | typ 94.7 °C/W | 4 |
| Junction-to-top characterization parameter ΨJT | D (SOIC), 14 PINS | typ 49.1 °C/W | 4 |
| Junction-to-board characterization parameter ΨJB | D (SOIC), 14 PINS | typ 94.3 °C/W | 4 |
| VOH VOH | TA = 25°C; VCC = 4.5 V; VI = VIH or VIL; IOH = −20 uA | min 4.4 · typ 4.499 V | 5 |
| VOH VOH | SN74HCT74; over recommended operating free-air temperature range; VCC = 4.5 V; VI = VIH or VIL; IOH = −20 uA | min 4.4 V | 5 |
| VOH VOH | TA = 25°C; VCC = 4.5 V; VI = VIH or VIL; IOH = −4 mA | min 3.98 · typ 4.3 V | 5 |
| VOH VOH | SN74HCT74; over recommended operating free-air temperature range; VCC = 4.5 V; VI = VIH or VIL; IOH = −4 mA | min 3.84 V | 5 |
| VOL VOL | TA = 25°C; VCC = 4.5 V; VI = VIH or VIL; IOL = 20 uA | typ 0.001 · max 0.1 V | 5 |
| VOL VOL | SN74HCT74; over recommended operating free-air temperature range; VCC = 4.5 V; VI = VIH or VIL; IOL = 20 uA | max 0.1 V | 5 |
| VOL VOL | TA = 25°C; VCC = 4.5 V; VI = VIH or VIL; IOL = 4 mA | typ 0.17 · max 0.26 V | 5 |
| VOL VOL | SN74HCT74; over recommended operating free-air temperature range; VCC = 4.5 V; VI = VIH or VIL; IOL = 4 mA | max 0.33 V | 5 |
| II II | TA = 25°C; VI = VCC or 0; VCC = 5.5 V; typical and maximum are magnitudes of bipolar current | typ 0.1 · max 100 nA | 5 |
| II II | SN74HCT74; over recommended operating free-air temperature range; VI = VCC or 0; VCC = 5.5 V; maximum magnitude ±1000 nA | max 1000 nA | 5 |
| ICC ICC | TA = 25°C; Vi = VCC or 0; IO = 0; VCC = 5.5 V | max 4 uA | 5 |
| ICC ICC | SN74HCT74; over recommended operating free-air temperature range; Vi = VCC or 0; IO = 0; VCC = 5.5 V | max 40 uA | 5 |
| ΔICC (1) ΔICC | TA = 25°C; VCC = 5.5 V; one input at 0.5 V or 2.4 V, other inputs at 0 or VCC | typ 1.4 · max 2.4 mA | 5 |
| ΔICC (1) ΔICC | SN74HCT74; over recommended operating free-air temperature range; VCC = 5.5 V; one input at 0.5 V or 2.4 V, other inputs at 0 or VCC | max 2.9 mA | 5 |
| Ci Ci | TA = 25°C; VCC = 4.5 V to 5.5 V | typ 3 · max 10 pF | 5 |
| Ci Ci | SN74HCT74; over recommended operating free-air temperature range; VCC = 4.5 V to 5.5 V | max 10 pF | 5 |
| Clock frequency fclock | TA = 25°C; VCC = 4.5 V | max 27 MHz | 5 |
| Clock frequency fclock | SN74HCT74; over recommended operating free-air temperature range; VCC = 4.5 V | max 22 MHz | 5 |
| Clock frequency fclock | TA = 25°C; VCC = 5.5 V | max 30 MHz | 5 |
| Clock frequency fclock | SN74HCT74; over recommended operating free-air temperature range; VCC = 5.5 V | max 24 MHz | 5 |
| Pulse duration tw | TA = 25°C; PRE or CLR low; VCC = 4.5 V | min 16 ns | 5 |
| Pulse duration tw | SN74HCT74; over recommended operating free-air temperature range; PRE or CLR low; VCC = 4.5 V | min 20 ns | 5 |
| Pulse duration tw | TA = 25°C; PRE or CLR low; VCC = 5.5 V | min 14 ns | 5 |
| Pulse duration tw | SN74HCT74; over recommended operating free-air temperature range; PRE or CLR low; VCC = 5.5 V | min 18 ns | 5 |
| Pulse duration tw | TA = 25°C; CLK high or low; VCC = 4.5 V | min 18 ns | 5 |
| Pulse duration tw | SN74HCT74; over recommended operating free-air temperature range; CLK high or low; VCC = 4.5 V | min 23 ns | 5 |
| Pulse duration tw | TA = 25°C; CLK high or low; VCC = 5.5 V | min 16 ns | 5 |
| Pulse duration tw | SN74HCT74; over recommended operating free-air temperature range; CLK high or low; VCC = 5.5 V | min 21 ns | 5 |
| Setup time before CLK↑ tsu | TA = 25°C; Data; VCC = 4.5 V | min 12 ns | 5 |
| Setup time before CLK↑ tsu | SN74HCT74; over recommended operating free-air temperature range; Data; VCC = 4.5 V | min 15 ns | 5 |
| Setup time before CLK↑ tsu | TA = 25°C; Data; VCC = 5.5 V | min 11 ns | 5 |
| Setup time before CLK↑ tsu | SN74HCT74; over recommended operating free-air temperature range; Data; VCC = 5.5 V | min 14 ns | 5 |
| Setup time before CLK↑ tsu | TA = 25°C; PRE or CLR inactive; VCC = 4.5 V | min 0 ns | 5 |
| Setup time before CLK↑ tsu | SN74HCT74; over recommended operating free-air temperature range; PRE or CLR inactive; VCC = 4.5 V | min 0 ns | 5 |
| Setup time before CLK↑ tsu | TA = 25°C; PRE or CLR inactive; VCC = 5.5 V | min 0 ns | 5 |
| Setup time before CLK↑ tsu | SN74HCT74; over recommended operating free-air temperature range; PRE or CLR inactive; VCC = 5.5 V | min 0 ns | 5 |
| Hold time, data after CLK↑ th | TA = 25°C; VCC = 4.5 V | min 0 ns | 5 |
| Hold time, data after CLK↑ th | SN74HCT74; over recommended operating free-air temperature range; VCC = 4.5 V | min 0 ns | 5 |
| Hold time, data after CLK↑ th | TA = 25°C; VCC = 5.5 V | min 0 ns | 5 |
| Hold time, data after CLK↑ th | SN74HCT74; over recommended operating free-air temperature range; VCC = 5.5 V | min 0 ns | 5 |
| fmax fmax | TA = 25°C; CL = 50 pF; VCC = 4.5 V | min 27 · typ 40 MHz | 6 |
| fmax fmax | SN74HCT74; over recommended operating free-air temperature range; CL = 50 pF; VCC = 4.5 V | min 22 MHz | 6 |
| fmax fmax | TA = 25°C; CL = 50 pF; VCC = 5.5 V | min 30 · typ 46 MHz | 6 |
| fmax fmax | SN74HCT74; over recommended operating free-air temperature range; CL = 50 pF; VCC = 5.5 V | min 24 MHz | 6 |
| tpd tpd | TA = 25°C; PRE or CLR to outputs; CL = 50 pF; VCC = 4.5 V | typ 21 · max 35 ns | 6 |
| tpd tpd | SN74HCT74; over recommended operating free-air temperature range; PRE or CLR to outputs; CL = 50 pF; VCC = 4.5 V | max 44 ns | 6 |
| tpd tpd | TA = 25°C; PRE or CLR to outputs; CL = 50 pF; VCC = 5.5 V | typ 17 · max 31 ns | 6 |
| tpd tpd | SN74HCT74; over recommended operating free-air temperature range; PRE or CLR to outputs; CL = 50 pF; VCC = 5.5 V | max 40 ns | 6 |
| tpd tpd | TA = 25°C; CLK to outputs; CL = 50 pF; VCC = 4.5 V | typ 20 · max 28 ns | 6 |
| tpd tpd | SN74HCT74; over recommended operating free-air temperature range; CLK to outputs; CL = 50 pF; VCC = 4.5 V | max 35 ns | 6 |
| tpd tpd | TA = 25°C; CLK to outputs; CL = 50 pF; VCC = 5.5 V | typ 18 · max 25 ns | 6 |
| tpd tpd | SN74HCT74; over recommended operating free-air temperature range; CLK to outputs; CL = 50 pF; VCC = 5.5 V | max 31 ns | 6 |
| tt tt | TA = 25°C; outputs; CL = 50 pF; VCC = 4.5 V | typ 8 · max 15 ns | 6 |
| tt tt | SN74HCT74; over recommended operating free-air temperature range; outputs; CL = 50 pF; VCC = 4.5 V | max 19 ns | 6 |
| tt tt | TA = 25°C; outputs; CL = 50 pF; VCC = 5.5 V | typ 7 · max 14 ns | 6 |
| tt tt | SN74HCT74; over recommended operating free-air temperature range; outputs; CL = 50 pF; VCC = 5.5 V | max 17 ns | 6 |
| Power dissipation capacitance per flip-flop Cpd | TA = 25℃; No load | typ 35 pF | 6 |
Ordering codes, by the datasheet
8- SN74HCT74D
- SOIC (14) · 8.65mm × 3.90mm nominal package size · p. 1
- SN74HCT74DB
- SSOP (14) · 6.20mm × 5.30mm nominal package size · p. 1
- SN74HCT74N
- PDIP (14) · 19.31mm × 6.35mm nominal package size · p. 1
- SN74HCT74NS
- SO (14) · 10.20mm × 5.30mm nominal package size · p. 1
- SN74HCT74PW
- TSSOP (14) · 5.00mm × 4.40mm nominal package size · p. 1
- SNJ54HCT74FK
- LCCC (20) · SN54HCT74 family; 8.89mm × 8.45mm nominal package size · p. 1
- SNJ54HCT74W
- CFP (14) · SN54HCT74 family; 9.21mm × 6.29mm nominal package size · p. 1
- SNJ54HCT74J
- CDIP (14) · SN54HCT74 family; 19.55mm × 6.71mm nominal package size · p. 1
Parts like it
7SN74HCT74NSRE4
SO-14-40℃~+85℃ 1 2 25ns@5.5V,50pF 3pF 4.5V~5.5V 46MHz 4mA 4mA 4uA 74HCT Series Complementary D-Type Rising Edge Set and Reset SO-14 Flip Flops ROHSTexas InstrumentsFlip FlopsSN74HCT74PW
TSSOP-14-40℃~+85℃ 0ns 1 14ns 2 25ns@5.5V,50pF 3pF 4.5V~5.5V 46MHz 4mA 4mA 4uA 74HCT Series Asynchronous Complementary D-Type Rising Edge Set and Reset TSSOP-14 Flip Flops ROHSTexas InstrumentsFlip FlopsSN74HCT74N
PDIP-14-40℃~+85℃ 0ns 1 14ns 2 25ns@5.5V,50pF 3pF 4.5V~5.5V 46MHz 4mA 4mA 4uA 74HCT Series Complementary D-Type Rising Edge Set and Reset PDIP-14 Flip Flops ROHSTexas InstrumentsFlip FlopsSN74HCT74NE4
PDIP-14-40℃~+85℃ 0ns 1 14ns 2 25ns@5.5V,50pF 3pF 4.5V~5.5V 46MHz 4mA 4mA 4uA 74HCT Series Complementary D-Type Rising Edge Set and Reset PDIP-14 Flip Flops ROHSTexas InstrumentsFlip FlopsSN74HCT74NG4
PDIP-1425ns@5.5V,50pF 3pF 4.5V~5.5V 46MHz 4mA 4mA 4uA 74HCT Series Complementary D-Type Rising Edge Set and Reset PDIP-14 Flip Flops ROHSTexas InstrumentsFlip FlopsSN74HCT74DB
SSOP-14-208mil25ns@5.5V,50pF 3pF 4.5V~5.5V 46MHz 4mA 4mA 4uA 74HCT Series Complementary D-Type Rising Edge Set and Reset SSOP-14-208mil Flip Flops ROHSTexas InstrumentsFlip FlopsSN74HCT74PWRE4
TSSOP-14Flip FlopsTexas Instruments
Questions
Is there a KiCad symbol and footprint for the SN74HCT74D?
Yes. The symbol is 74xx:74HCT74 and the footprint Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the SN74HCT74D?
SOIC-14, with 14 pins. Its footprint is drawn on this page.
Where is the SN74HCT74D datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the SN74HCT74D?
JLCPCB lists it as part C352961, with 10,839 in stock; the sellers' links on this page open their listings.
What can replace the SN74HCT74D?
Parts like it in the library: the SN74HCT74NSRE4 by Texas Instruments, the SN74HCT74PW by Texas Instruments, the SN74HCT74N by Texas Instruments and the SN74HCT74NE4 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.