Skip to the content
1234567891011121314

SN74HCT125D

Texas InstrumentsExtended

-40℃~+85℃ 1 18ns@5.5V,50pF 4 4.5V~5.5V 6mA 6mA 74HCT 80uA Tri-State Unidirectional SOIC-14 Buffers, Drivers, Receivers, Transceivers ROHS

Part id
ti/SN74HCT125D
Category
Buffers, Drivers, Receivers, Transceivers
Package
SOIC-14
Pins
14
In stock
12,125 at JLCPCB (C352957)
Used on
5 open-source boards

Overview

The SN74HCT125D is a buffers, Drivers, Receivers, Transceiver made by Texas Instruments in a SOIC-14 package with 14 pins. -40℃~+85℃ 1 18ns@5.5V,50pF 4 4.5V~5.5V 6mA 6mA 74HCT 80uA Tri-State Unidirectional SOIC-14 Buffers, Drivers, Receivers, Transceivers ROHS.

PCBKit's library has its KiCad symbol (74xx:74LS125, from KiCad's library) and its footprint (Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, from KiCad's library), ready for a KiCad board. 12,125 are in stock at JLCPCB (part C352957). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

123
74xx:74LS125From KiCad's library

Footprint

1234567891011121314
Package_SO:SOIC-14_3.9x8.7mm_P1.27mmFrom KiCad's library

From the datasheet

12
Supply, least
4.5 V · VCC, recommended operating min · p. 4
Supply, most
5.5 V · VCC, recommended operating max · p. 4
Supply, absolute maximum
7 V · VCC, absolute max · p. 4
Works from
-40 °C · Operating free-air temperature min, SN74HCT125 · p. 4
Works up to
85 °C · Operating free-air temperature max, SN74HCT125 · p. 4
Junction, hottest
150 °C · Junction temperature absolute max · p. 4
Takes working
80 µA · VCC supply current max, VI = VCC or 0, IO = 0, VCC = 5.5 V · p. 5
A pin gives at most
35 mA · Continuous output current magnitude absolute max, VO = 0 to VCC · p. 4
Junction to air (D (SOIC))
138.7 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to case (D (SOIC))
93.8 K/W · Junction-to-case (top) thermal resistance · p. 4
Junction to board (D (SOIC))
94.7 K/W · Junction-to-board thermal resistance · p. 4
Edge
7 ns · Output transition time typical, VCC = 5.5 V, CL = 50 pF, TA = 25°C · p. 5

What it is and has

4
Buffer channels
4, three-state outputs · p. 1
Output drive
±6mA at 5V · p. 1
Input compatibility
TTL voltage · p. 1
Package
SOIC (14), 8.65mm × 3.90mm nominal · p. 1

Around it

2
cap 0.1 μF
between VCC and GND; Bypass capacitor at each VCC terminal; install as close to the power terminal as possible. · p. 9
cap 1 μF
between VCC and GND; Commonly used in parallel with the 0.1-uF bypass capacitor to reject different noise frequencies. · p. 9

Specifications

65
ParameterConditionsAs printedPage
Supply voltage range VCCOver operating free-air temperature rangemin -0.5 · max 7 V4
Input clamp current IIKVI < 0 or VI > VCC; ±20 mA limitmin -20 · max 20 mA4
Output clamp current IOKVO < 0 or VO > VCC; ±20 mA limitmin -20 · max 20 mA4
Continuous output current IOVO = 0 to VCC; ±35 mA limitmin -35 · max 35 mA4
Continuous current through VCC or GND±70 mA limitmin -70 · max 70 mA4
Junction temperature TJmax 150 °C4
Storage temperature Tstgmin -65 · max 150 °C4
Supply voltage VCCSN74HCT125; nominal 5 Vmin 4.5 · max 5.5 V4
High-level input voltage VIHSN74HCT125; VCC = 4.5 V to 5.5 Vmin 2 V4
Low-level input voltage VILSN74HCT125; VCC = 4.5 V to 5.5 Vmax 0.8 V4
Input voltage VISN74HCT125; maximum VCCmin 0 V4
Output voltage VOSN74HCT125; maximum VCCmin 0 V4
Input transition rise/fall time ttSN74HCT125max 500 ns4
Operating free-air temperature TASN74HCT125min -40 · max 85 °C4
Junction-to-ambient thermal resistance RθJAD (SOIC), 14 PINStyp 138.7 °C/W4
Junction-to-case (top) thermal resistance RθJCD (SOIC), 14 PINStyp 93.8 °C/W4
Junction-to-board thermal resistance RθJBD (SOIC), 14 PINStyp 94.7 °C/W4
Junction-to-top characterization paramete ψJTD (SOIC), 14 PINStyp 49.1 °C/W4
Junction-to-board characterization parameter ψJBD (SOIC), 14 PINStyp 94.3 °C/W4
High-level output voltage VOHTA = 25°C; VCC = 4.5 V; IOH = –20 uAmin 4.4 · typ 4.499 V5
High-level output voltage VOHSN74HCT125; VCC = 4.5 V; IOH = –20 uAmin 4.4 V5
High-level output voltage VOHTA = 25°C; VCC = 4.5 V; IOH = –6 mAmin 3.98 · typ 4.3 V5
High-level output voltage VOHSN74HCT125; VCC = 4.5 V; IOH = –6 mAmin 3.84 V5
Low-level output voltage VOLTA = 25°C; VCC = 5.5 V; IOL = 20 uAtyp 0.001 · max 0.1 V5
Low-level output voltage VOLSN74HCT125; VCC = 5.5 V; IOL = 20 uAmax 0.1 V5
Low-level output voltage VOLTA = 25°C; VCC = 5.5 V; IOL = 6 mAtyp 0.17 · max 0.26 V5
Low-level output voltage VOLSN74HCT125; VCC = 5.5 V; IOL = 6 mAmax 0.33 V5
Input hold current IITA = 25°C; VI = VCC or 0; VCC = 5.5 V; values are ± magnitudestyp 0.1 · max 100 nA5
Input hold current IISN74HCT125; VI = VCC or 0; VCC = 5.5 V; maximum is ± magnitudemax 1000 nA5
Off-state output current IOZTA = 25°C; Vo = VCC or 0; VCC = 5.5 V; values are ± magnitudestyp 0.01 · max 0.5 uA5
Off-state output current IOZSN74HCT125; Vo = VCC or 0; VCC = 5.5 V; maximum is ± magnitudemax 5 uA5
Supply current ICCTA = 25°C; VI = VCC or 0; IO = 0; VCC = 5.5 Vmax 8 uA5
Supply current ICCSN74HCT125; VI = VCC or 0; IO = 0; VCC = 5.5 Vmax 80 uA5
Supply-current change ΔICCTA = 25°C; VCC = 5.5 V; one input at 0.5 V or 2.4 V, other inputs at 0 or VCCtyp 1.4 · max 2.4 mA5
Supply-current change ΔICCSN74HCT125; VCC = 5.5 V; one input at 0.5 V or 2.4 V, other inputs at 0 or VCCmax 2.9 mA5
Input capacitance CiTA = 25°C; VCC = 4.5 to 5.5 Vtyp 3 · max 10 pF5
Input capacitance CiSN74HCT125; VCC = 4.5 to 5.5 Vmax 10 pF5
Propagation delay tpdCL = 50 pF; TA = 25°C; VCC = 4.5 V; A to Ytyp 11 · max 20 ns5
Propagation delay tpdCL = 50 pF; SN74HCT125; VCC = 4.5 V; A to Ymax 25 ns5
Propagation delay tpdCL = 50 pF; TA = 25°C; VCC = 5.5 V; A to Ytyp 10 · max 18 ns5
Propagation delay tpdCL = 50 pF; SN74HCT125; VCC = 5.5 V; A to Ymax 22 ns5
Enable time tenCL = 50 pF; TA = 25°C; VCC = 4.5 V; OE to Ytyp 18 · max 28 ns5
Enable time tenCL = 50 pF; SN74HCT125; VCC = 4.5 V; OE to Ymax 35 ns5
Enable time tenCL = 50 pF; TA = 25°C; VCC = 5.5 V; OE to Ytyp 15 · max 25 ns5
Enable time tenCL = 50 pF; SN74HCT125; VCC = 5.5 V; OE to Ymax 31 ns5
Diable time tdisCL = 50 pF; TA = 25°C; VCC = 4.5 V; OE to Ytyp 15 · max 26 ns5
Diable time tdisCL = 50 pF; SN74HCT125; VCC = 4.5 V; OE to Ymax 33 ns5
Diable time tdisCL = 50 pF; TA = 25°C; VCC = 5.5 V; OE to Ytyp 13 · max 23 ns5
Diable time tdisCL = 50 pF; SN74HCT125; VCC = 5.5 V; OE to Ymax 30 ns5
Transition time ttCL = 50 pF; TA = 25°C; VCC = 4.5 V; output Anytyp 8 · max 15 ns5
Transition time ttCL = 50 pF; SN74HCT125; VCC = 4.5 V; output Anymax 19 ns5
Transition time ttCL = 50 pF; TA = 25°C; VCC = 5.5 V; output Anytyp 7 · max 14 ns5
Transition time ttCL = 50 pF; SN74HCT125; VCC = 5.5 V; output Anymax 17 ns5
Propagation delay tpdCL = 150 pF; TA = 25°C; VCC = 4.5 V; A to Ytyp 19 · max 36 ns5
Propagation delay tpdCL = 150 pF; SN74HCT125; VCC = 4.5 V; A to Ymax 46 ns5
Propagation delay tpdCL = 150 pF; TA = 25°C; VCC = 5.5 V; A to Ytyp 16 · max 32 ns5
Propagation delay tpdCL = 150 pF; SN74HCT125; VCC = 5.5 V; A to Ymax 42 ns5
Enable time tenCL = 150 pF; TA = 25°C; VCC = 4.5 V; OE to Ytyp 25 · max 40 ns5
Enable time tenCL = 150 pF; SN74HCT125; VCC = 4.5 V; OE to Ymax 50 ns5
Enable time tenCL = 150 pF; TA = 25°C; VCC = 5.5 V; OE to Ytyp 21 · max 35 ns5
Enable time tenCL = 150 pF; SN74HCT125; VCC = 5.5 V; OE to Ymax 43 ns5
Transition time ttCL = 150 pF; TA = 25°C; VCC = 4.5 V; output Anytyp 17 · max 42 ns5
Transition time ttCL = 150 pF; SN74HCT125; VCC = 4.5 V; output Anymax 53 ns5
Transition time ttCL = 150 pF; TA = 25°C; VCC = 5.5 V; output Anytyp 14 · max 38 ns5
Transition time ttCL = 150 pF; SN74HCT125; VCC = 5.5 V; output Anymax 48 ns5

Ordering codes, by the datasheet

8
SN74HCT125D
SOIC-14 (D) · Package quantity 50; NIPDAU lead finish; -40 to 85 °C · p. 11
SN74HCT125DE4
SOIC-14 (D) · Package quantity 50; NIPDAU lead finish; -40 to 85 °C · p. 11
SN74HCT125DG4
SOIC-14 (D) · Package quantity 50; NIPDAU lead finish; -40 to 85 °C · p. 11
SN74HCT125DR
SOIC-14 (D) · Package quantity 2500; NIPDAU | SN lead finish; -40 to 85 °C · p. 11
SN74HCT125DRE4
SOIC-14 (D) · Package quantity 2500; NIPDAU lead finish; -40 to 85 °C · p. 11
SN74HCT125DT
SOIC-14 (D) · Package quantity 250; NIPDAU lead finish; -40 to 85 °C · p. 11
SN74HCT125N
PDIP-14 (N) · Package quantity 25; NIPDAU lead finish; -40 to 85 °C · p. 11
SN74HCT125NE4
PDIP-14 (N) · Package quantity 25; NIPDAU lead finish; -40 to 85 °C · p. 11

Open-source boards using it

5
  • 4 layers49 × 68.4 mmElectronULA, the printed circuit board in 3D

    ElectronULA

    adbsolutions/ElectronULA

    Project to create replacement ULA board for Acorn Electron

    89 parts17GPL-3.0
  • 2 layers99.5 × 75 mmFinal outline, the printed circuit board in 3D

    Final outline

    MITEVT/opel_motor_interface

    Firmware for MIT EVT's Opel GT Motor Interface Module

    45 partsMIT
  • 2 layers91.4 × 61 mmAtusbprog, the printed circuit board in 3D

    Atusbprog

    mwbrown/atusbprog

    Atmel 8051 USB programmer using a SiLabs EFM8UB1 device.

    30 partsMIT
  • 2 layers40 × 109 mmMidi minion, the printed circuit board in 3D

    Midi minion

    AudioMorphology/Europi

    Opensource sequencer software for Raspberry Pi equipped with Eurorack-compatible hardware

    43 parts103
  • 2 layers26 × 100 mmConductor main, the printed circuit board in 3D

    Conductor main

    bmurauer/cynthia

    Plans for my modular synthesizer

    14 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SN74HCT125D?

Yes. The symbol is 74xx:74LS125 and the footprint Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SN74HCT125D?

SOIC-14, with 14 pins. Its footprint is drawn on this page.

Where is the SN74HCT125D datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the SN74HCT125D?

JLCPCB lists it as part C352957, with 12,125 in stock; the sellers' links on this page open their listings.

What can replace the SN74HCT125D?

Parts like it in the library: the CD74HC243M96 by Texas Instruments, the MC74VHCT50AD by onsemi, the TC74HCT7007AF-ELF by Toshiba and the CD4041UBM96 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SN74HCT125D?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.