Overview
The SN74HCT04D is an inverter made by Texas Instruments in a SOIC-14 package with 14 pins. -40℃~+85℃ 18ns@5.5V,50pF 2V 2uA 3.7V 4.5V~5.5V 400mV 4mA 4mA 6 74HCT 800mV SOIC-14 Inverters ROHS.
PCBKit's library has its KiCad symbol (74xx:74HCT04, from KiCad's library) and its footprint (Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, from KiCad's library), ready for a KiCad board. 15,199 are in stock at JLCPCB (part C6766).
Symbol
Footprint
From the datasheet
11- Supply, least
- 4.5 V · VCC, recommended operating min · p. 4
- Supply, most
- 5.5 V · VCC, recommended operating max · p. 4
- Supply, absolute maximum
- 7 V · VCC, absolute max · p. 4
- Works from
- -40 °C · Operating free-air temperature min, SN74HCT04 · p. 4
- Works up to
- 85 °C · Operating free-air temperature max, SN74HCT04 · p. 4
- Junction, hottest
- 150 °C · Junction temperature absolute max · p. 4
- A pin gives at most
- 25 mA · Continuous output source or sink current absolute max · p. 4
- Junction to air (D (SOIC))
- 138.7 K/W · Junction-to-ambient thermal resistance · p. 4
- Junction to case (D (SOIC))
- 93.8 K/W · Junction-to-case (top) thermal resistance · p. 4
- Junction to board (D (SOIC))
- 94.7 K/W · Junction-to-board thermal resistance · p. 4
- Edge
- 8 ns · Output transition time typical, VCC = 5.5 V, CL = 50 pF, TA = 25°C · p. 5
What it is and has
5- Inverters
- 6 independent · p. 1
- Output fanout
- Up to 10 LSTTL loads · p. 1
- Output drive
- ±4mA at 5V · p. 1
- Input compatibility
- TTL · p. 1
- Package
- SOIC (14), 8.65mm × 3.90mm nominal · p. 1
Around it
2- cap 0.1 μF
- between VCC and GND; Bypass each VCC terminal; install as close to the power terminal as possible. · p. 8
- cap 1 μF
- between VCC and GND; Commonly used in parallel with the 0.1-uF bypass capacitor to reject different noise frequencies. · p. 8
Specifications
36| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage range VCC | Over operating free-air temperature range | min -0.5 · max 7 V | 4 |
| Input clamp current IIK | VI < 0 or VI > VCC; maximum magnitude, ±20 mA | max 20 mA | 4 |
| Output clamp current IOK | VO < 0 or VO > VCC; maximum magnitude, ±20 mA | max 20 mA | 4 |
| Continuous output current IO | VO = 0 to VCC; maximum magnitude, ±25 mA | max 25 mA | 4 |
| Continuous current through VCC or GND VCC or GND | Maximum magnitude, ±50 mA | max 50 mA | 4 |
| Junction temperature TJ | max 150 °C | 4 | |
| Storage temperature Tstg | min -65 · max 150 °C | 4 | |
| Supply voltage VCC | SN74HCT04; nominal 5 V | min 4.5 · max 5.5 V | 4 |
| High-level input voltage VIH | SN74HCT04; VCC = 4.5 V to 5.5 V | min 2 V | 4 |
| Low-level input voltage VIL | SN74HCT04; VCC = 4.5 V to 5.5 V | max 0.8 V | 4 |
| Input voltage VI | SN74HCT04; maximum VCC | min 0 V | 4 |
| Output voltage VO | SN74HCT04; maximum VCC | min 0 V | 4 |
| Input transition rise/fall time Δt/Δv | SN74HCT04 | max 500 ns | 4 |
| Operating free-air temperature TA | SN74HCT04 | min -40 · max 85 °C | 4 |
| Junction-to-ambient thermal resistance RθJA | D (SOIC), 14 PINS | typ 138.7 °C/W | 4 |
| Junction-to-case (top) thermal resistance RθJC(top) | D (SOIC), 14 PINS | typ 93.8 °C/W | 4 |
| Junction-to-board thermal resistance RθJB | D (SOIC), 14 PINS | typ 94.7 °C/W | 4 |
| Junction-to-top characterization parameter ψJT | D (SOIC), 14 PINS | typ 49.1 °C/W | 4 |
| Junction-to-case (bottom) thermal resistance ψJB | D (SOIC), 14 PINS | typ 94.3 °C/W | 4 |
| High-level output voltage VOH | TA = 25°C; VCC = 4.5 V; IOH = – 20 uA | min 4.4 · typ 4.499 V | 5 |
| High-level output voltage VOH | TA = 25°C; VCC = 4.5 V; IOH = – 4 mA | min 3.98 · typ 4.3 V | 5 |
| Low-level output voltage VOL | TA = 25°C; VCC = 5.5 V; IOL = 20 uA | typ 0.001 · max 0.1 V | 5 |
| Low-level output voltage VOL | TA = 25°C; VCC = 5.5 V; IOL = 4 mA | typ 0.17 · max 0.26 V | 5 |
| Input hold current II | TA = 25°C; VI = VCC or 0; VCC = 5.5 V; typical and maximum magnitudes are ±0.1 and ±100 nA | typ 0.1 · max 100 nA | 5 |
| Supply current ICC | TA = 25°C; VI = VCC or 0. IO = 0; VCC = 5.5 V | max 2 uA | 5 |
| Supply-current change ΔICC | TA = 25°C; VCC = 5.5 V; one input at 0.5V or 2.4 V, other inputs at 0 or VCC | typ 1.4 · max 2.4 mA | 5 |
| Input capacitance Ci | TA = 25°C; VCC = 4.5 to 5.5 V | typ 3 · max 10 pF | 5 |
| Propagation delay tpd | TA = 25°C; CL = 50 pF; A or B to Y; VCC = 4.5 V | typ 14 · max 20 ns | 5 |
| Propagation delay tpd | SN74HCT04; CL = 50 pF; A or B to Y; VCC = 4.5 V | max 25 ns | 5 |
| Propagation delay tpd | TA = 25°C; CL = 50 pF; A or B to Y; VCC = 5.5 V | typ 13 · max 18 ns | 5 |
| Propagation delay tpd | SN74HCT04; CL = 50 pF; A or B to Y; VCC = 5.5 V | max 23 ns | 5 |
| Transition time tt | TA = 25°C; CL = 50 pF; output Y; VCC = 4.5 V | typ 9 · max 15 ns | 5 |
| Transition time tt | SN74HCT04; CL = 50 pF; output Y; VCC = 4.5 V | max 19 ns | 5 |
| Transition time tt | TA = 25°C; CL = 50 pF; output Y; VCC = 5.5 V | typ 8 · max 14 ns | 5 |
| Transition time tt | SN74HCT04; CL = 50 pF; output Y; VCC = 5.5 V | max 17 ns | 5 |
| Power dissipation capacitance Cpd | TA = 25°C; No load | typ 20 pF | 5 |
Ordering codes, by the datasheet
5- SN74HCT04PW
- TSSOP · 14 pins; package quantity 90; -40 to 85°C · p. 11
- SN74HCT04PWR
- TSSOP · 14 pins; package quantity 2000; -40 to 85°C · p. 11
- SN74HCT04PWT
- TSSOP · 14 pins; package quantity 250; -40 to 85°C · p. 11
- SNJ54HCT04FK
- LCCC · 20 pins; package quantity 1; -55 to 125°C · p. 11
- SNJ54HCT04J
- CDIP · 14 pins; package quantity 1; -55 to 125°C · p. 11
Parts like it
8MC14584BD
SOIC-14-55℃~+125℃ 1 1.6V~4.6V 1uA 3.4V~10.5V 3V~18V 4000B Series 6 8.8mA 8.8mA 80ns@15V,50pF Schmitt trigger 噪声抑制功能 SOIC-14 Inverters ROHSonsemiInvertersMC14106BD
SOIC-14-55℃~+125℃ 1 14.95V 1uA 3.6V~10.8V 3V~18V 4000B Series 6 8.8mA 8.8mA 80ns@15V,50pF 900mV~4V Schmitt trigger SOIC-14 Inverters ROHSonsemiInvertersCD4007UBM/TR
SOP-14-55℃~+125℃ 1V、2.5V 3V~18V 4.2mA 4.2mA 4.95V、9.95V、14.95V 4000B Series 4V、12.5V 500nA 50mV 50ns@15V,50pF SOP-14 Inverters ROHSHGSEMIInvertersRS6G14XP
SOP-14-40℃~+125℃ 1.2V、1.9V、2.3V、2.4V、3.8V 1.65V~5.5V 100mV、300mV、400mV、450mV、550mV、550mV 1uA 24mA 24mA 3.1ns@3.3V,50pF 6 Power shutdown protection、Noise suppression function Schmitt trigger SOP-14 Inverters ROHSJiangsu RUNIC TechInvertersIW4069UBDT
SOP-14-55℃~+125℃ 1 1V~2.5V 1uA 3.4mA 3.4mA 3V~18V 4.95V~14.95V 4V~12.5V 50mV 50ns@15V,50pF 6 SOP-14 Inverters ROHSIKSEMICONInvertersSN74ALS1005D
SOIC-140℃~+70℃ 1 100uA 24mA 2V 30ns@5V,50pF 4.5V~5.5V 6 74ALS 800mV SOIC-14 Inverters ROHSTexas InstrumentsInvertersCD4007BM/TR
SOP-1420ns@10V,15pF 3V~15V Noise suppression function SOP-14 Inverters ROHSHGSEMIInverters74HC14D
SO-14-40℃~+125℃ 1 1.5V~4.2V 21ns@6V,50pF 2V~6V 2uA 300mV~1.2V 5.2mA 5.2mA 6 74HC Schmitt trigger SOIC-14 Inverters ROHSNexperiaInverters
Questions
Is there a KiCad symbol and footprint for the SN74HCT04D?
Yes. The symbol is 74xx:74HCT04 and the footprint Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the SN74HCT04D?
SOIC-14, with 14 pins. Its footprint is drawn on this page.
Where is the SN74HCT04D datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the SN74HCT04D?
JLCPCB lists it as part C6766, with 15,199 in stock; the sellers' links on this page open their listings.
What can replace the SN74HCT04D?
Parts like it in the library: the MC14584BD by onsemi, the MC14106BD by onsemi, the CD4007UBM/TR by HGSEMI and the RS6G14XP by Jiangsu RUNIC Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.