Skip to the content
1234567891011121314151617181920

SN74HC241N

Texas InstrumentsExtended

-40℃~+85℃ 2 23ns@4.5V,50pF 2V~6V 4 7.8mA 7.8mA 74HC 80uA Output enable Tri-State Unidirectional PDIP-20 Buffers, Drivers, Receivers, Transceivers ROHS

Part id
ti/SN74HC241N
Category
Buffers, Drivers, Receivers, Transceivers
Package
PDIP-20
Pins
20
In stock
0 at JLCPCB (C116253)
Used on
1 open-source board

Overview

The SN74HC241N is a buffers, Drivers, Receivers, Transceiver made by Texas Instruments in a PDIP-20 package with 20 pins. -40℃~+85℃ 2 23ns@4.5V,50pF 2V~6V 4 7.8mA 7.8mA 74HC 80uA Output enable Tri-State Unidirectional PDIP-20 Buffers, Drivers, Receivers, Transceivers ROHS.

PCBKit's library has its KiCad symbol (74xx:74LS241, from KiCad's library) and its footprint (Package_DIP:DIP-20_W7.62mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C116253). 1 open-source board in 1 repository on GitHub use it.

Symbol

1OEa2I0a3O3b4I1a5O2b6I2a7O1b8I3a9O0b10GND11I0b12O3a13I1b14O2a15I2b16O1a17I3b18O0a19OEb20VCC
74xx:74LS241From KiCad's library

Footprint

1234567891011121314151617181920
Package_DIP:DIP-20_W7.62mmFrom KiCad's library

Pinout

20
The pins of the SN74HC241N
PinNameType
1OEaInput
2I0aInput
3O3bTri-state
4I1aInput
5O2bTri-state
6I2aInput
7O1bTri-state
8I3aInput
9O0bTri-state
10GNDPower in
11I0bInput
12O3aTri-state
13I1bInput
14O2aTri-state
15I2bInput
16O1aTri-state
17I3bInput
18O0aTri-state
19OEbInput
20VCCPower in

Open-source boards using it

1
  • 2 layers101.6 × 53.3 mmPcb files, the printed circuit board in 3D

    Pcb files

    daveydaid/Stewart-Platform-Head-Massager

    Stewart-Gough Platform utilising Dynamixel servo motors. Control loop and simulation handled by PC side, sending control information to Arduino for servo actuation.

    28 parts12GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SN74HC241N?

Yes. The symbol is 74xx:74LS241 and the footprint Package_DIP:DIP-20_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SN74HC241N?

PDIP-20, with 20 pins. Its footprint is drawn on this page.

Where is the SN74HC241N datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the SN74HC241N?

JLCPCB lists it as part C116253, with 0 in stock; the sellers' links on this page open their listings.

What can replace the SN74HC241N?

Parts like it in the library: the 74HC541D by GR, the SN74HC240N(XBLW) by XBLW, the SN74HC244N(XBLW) by XBLW and the 74HC245N by HGSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SN74HC241N?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.