Skip to the content
12345678910111213141516

SN74HC165D

Texas InstrumentsExtended

-40℃~+125℃ 1 13ns@6V,50pF 2V~6V 4mA 62MHz 74HC 8 Complementary type Parallel or Serial to Serial SOP-16 Shift Registers ROHS

Part id
ti/SN74HC165D
Category
Shift Registers
Package
SOIC-16
Pins
16
In stock
58,812 at JLCPCB (C61060)
Used on
2 open-source boards

Overview

The SN74HC165D is a shift Register made by Texas Instruments in a SOIC-16 package with 16 pins. -40℃~+125℃ 1 13ns@6V,50pF 2V~6V 4mA 62MHz 74HC 8 Complementary type Parallel or Serial to Serial SOP-16 Shift Registers ROHS.

PCBKit's library has its KiCad symbol (74xx:74HC165, from KiCad's library) and its footprint (Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 58,812 are in stock at JLCPCB (part C61060). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1PL2CP3D44D55D66D77Q78GND9Q710DS11D012D113D214D315CE16VCC
74xx:74HC165From KiCad's library

Footprint

12345678910111213141516
Package_SO:SOIC-16_3.9x9.9mm_P1.27mmFrom KiCad's library

From the datasheet

10
Supply, least
2 V · VCC, recommended operating min · p. 4
Supply, most
6 V · VCC, recommended operating max · p. 4
Supply, absolute maximum
7 V · VCC, absolute max · p. 4
Works from
-40 °C · Operating free-air temperature min, SN74HC165 · p. 4
Works up to
125 °C · Operating free-air temperature max, SN74HC165 · p. 4
A pin gives at most
25 mA · Continuous output current absolute max magnitude, VO = 0 to VCC · p. 4
Junction to air (D (SOIC))
73 K/W · Junction-to-ambient thermal resistance · p. 4
Edge
38 ns · Output transition time typical, VCC = 2 V, CL = 50 pF, TA = 25°C · p. 6
Edge
8 ns · Output transition time typical, VCC = 4.5 V, CL = 50 pF, TA = 25°C · p. 6
Edge
6 ns · Output transition time typical, VCC = 6 V, CL = 50 pF, TA = 25°C · p. 6

What it is and has

11
Register
8-bit parallel-load shift register · p. 1
Output loading
Up to 10 LSTTL loads · p. 1
Output drive
±4 mA at 5 V · p. 1
Outputs
Complementary outputs · p. 1
Load inputs
Direct overriding load inputs · p. 1
Clock inputs
Gated clock inputs · p. 1
Conversion
Parallel-to-serial data conversion · p. 1
Package
SOIC (16) · p. 1
Output drive
Up to 10 LSTTL loads · p. 1
Supply current
80-µA maximum ICC · p. 1
Propagation delay
13 ns typical · p. 1

Around it

1
cap 0.1-μF
between VCC and GND; Recommended bypass capacitor for a single supply; install as close to the power pin as possible. · p. 15

Specifications

180
ParameterConditionsAs printedPage
Supply voltage VCCOver operating free-air temperature rangemin -0.5 · max 7 V4
Input clamp current IIKVI < 0 or VI > VCC; ± limitmax 20 mA4
Output clamp current IOKVO < 0 or VO > VCC; ± limitmax 20 mA4
Continuous output current IOVO = 0 to VCC; ± limitmax 25 mA4
Continuous current through VCC or GND± limitmax 50 mA4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001; ± ratingmax 1500 V4
Supply voltage VCCNominal supply voltage 5 Vmin 2 · max 6 V4
High-level input voltage VIHVCC = 2 Vmin 1.5 V4
High-level input voltage VIHVCC = 4.5 Vmin 3.15 V4
High-level input voltage VIHVCC = 6 Vmin 4.2 V4
Low level input voltage VILVCC = 2 Vmax 0.5 V4
Low level input voltage VILVCC = 4.5 Vmax 1.35 V4
Low level input voltage VILVCC = 6 Vmax 1.8 V4
Input voltage VIMaximum VCCmin 0 V4
Output voltage VOMaximum VCCmin 0 V4
Input transition rise and fall time Δt/ΔvVCC = 2 Vmax 1000 ns/V4
Input transition rise and fall time Δt/ΔvVCC = 4.5 Vmax 500 ns/V4
Input transition rise and fall time Δt/ΔvVCC = 6 Vmax 400 ns/V4
Operating free-air temperature TASN74HC165min -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJASN74HC165, D (SOIC)typ 73 °C/W4
VOH VOHVI = VIH or VIL; IOH = –20 uA; VCC = 2 Vmin 1.9 · typ 1.998 V5
VOH VOHVI = VIH or VIL; IOH = –20 uA; VCC = 4.5 Vmin 4.4 · typ 4.499 V5
VOH VOHVI = VIH or VIL; IOH = –20 uA; VCC = 6 Vmin 5.9 · typ 5.999 V5
VOH VOHVI = VIH or VIL; IOH = –4 mA; VCC = 4.5 Vmin 3.98 · typ 4.3 V5
VOH VOHVI = VIH or VIL; IOH = –5.2 mA; VCC = 6 Vmin 5.48 · typ 5.8 V5
VOL VOLVI = VIH or VIL; IOL = 20 uA; VCC = 2 Vtyp 0.002 · max 0.1 V5
VOL VOLVI = VIH or VIL; IOL = 20 uA; VCC = 4.5 Vtyp 0.001 · max 0.1 V5
VOL VOLVI = VIH or VIL; IOL = 20 uA; VCC = 6 Vtyp 0.001 · max 0.1 V5
VOL VOLVI = VIH or VIL; IOL = 4 mA; VCC = 4.5 Vtyp 0.17 · max 0.26 V5
VOL VOLVI = VIH or VIL; IOL = 5.2 mA; VCC = 6 Vtyp 0.15 · max 0.26 V5
II IIVI = VCC or 0; VCC = 6 V; ± valuestyp 0.1 · max 100 nA5
ICC ICCVI = VCC or 0; IO = 0; VCC = 6 Vmax 8 uA5
Ci CiVCC = 2 V to 6 Vtyp 3 · max 10 pF5
VOH VOHVI = VIH or VIL; IOH = –20 uA; TA = –40°C to 125°C; VCC = 2 Vmin 1.9 V5
VOH VOHVI = VIH or VIL; IOH = –20 uA; TA = –40°C to 125°C; VCC = 4.5 Vmin 4.4 V5
VOH VOHVI = VIH or VIL; IOH = –20 uA; TA = –40°C to 125°C; VCC = 6 Vmin 5.9 V5
VOH VOHVI = VIH or VIL; IOH = –4 mA; TA = –40°C to 85°C; VCC = 4.5 Vmin 3.84 V5
VOH VOHVI = VIH or VIL; IOH = –4 mA; TA = –40°C to 125°C; VCC = 4.5 Vmin 3.7 V5
VOH VOHVI = VIH or VIL; IOH = –5.2 mA; TA = –40°C to 85°C; VCC = 6 Vmin 5.34 V5
VOH VOHVI = VIH or VIL; IOH = –5.2 mA; TA = –40°C to 125°C; VCC = 6 Vmin 5.2 V5
VOL VOLVI = VIH or VIL; IOL = 20 uA; TA = –40°C to 125°C; VCC = 2 Vmax 0.1 V5
VOL VOLVI = VIH or VIL; IOL = 20 uA; TA = –40°C to 125°C; VCC = 4.5 Vmax 0.1 V5
VOL VOLVI = VIH or VIL; IOL = 20 uA; TA = –40°C to 125°C; VCC = 6 Vmax 0.1 V5
VOL VOLVI = VIH or VIL; IOL = 4 mA; TA = –40°C to 125°C; VCC = 4.5 Vmax 0.33 V5
VOL VOLVI = VIH or VIL; IOL = 5.2 mA; TA = –40°C to 125°C; VCC = 6 Vmax 0.33 V5
II IIVI = VCC or 0; TA = –40°C to 125°C; VCC = 6 V; ± limitmax 1000 nA6
ICC ICCVI = VCC or 0; IO = 0; TA = –40°C to 85°C; VCC = 6 Vmax 80 uA6
ICC ICCVI = VCC or 0; IO = 0; TA = –40°C to 125°C; VCC = 6 Vmax 160 uA6
Ci CiRecommended TA = –40°C to 125°C; VCC = 2 V to 6 Vmax 10 pF6
fmax fmaxCL = 50 pF; VCC = 2 Vmin 6 · typ 13 MHz6
fmax fmaxCL = 50 pF; VCC = 4.5 Vmin 31 · typ 50 MHz6
fmax fmaxCL = 50 pF; VCC = 6 Vmin 36 · typ 62 MHz6
tpd tpdSH/LD to QH or complementary QH; CL = 50 pF; VCC = 2 Vtyp 80 · max 150 ns6
tpd tpdSH/LD to QH or complementary QH; CL = 50 pF; VCC = 4.5 Vtyp 20 · max 30 ns6
tpd tpdSH/LD to QH or complementary QH; CL = 50 pF; VCC = 6 Vtyp 16 · max 26 ns6
tpd tpdCLK to QH or complementary QH; CL = 50 pF; VCC = 2 Vtyp 75 · max 150 ns6
tpd tpdCLK to QH or complementary QH; CL = 50 pF; VCC = 4.5 Vtyp 15 · max 30 ns6
tpd tpdCLK to QH or complementary QH; CL = 50 pF; VCC = 6 Vtyp 13 · max 26 ns6
tpd tpdH to QH or complementary QH; CL = 50 pF; VCC = 2 Vtyp 75 · max 150 ns6
tpd tpdH to QH or complementary QH; CL = 50 pF; VCC = 4.5 Vtyp 15 · max 30 ns6
tpd tpdH to QH or complementary QH; CL = 50 pF; VCC = 6 Vtyp 13 · max 26 ns6
tt ttAny output; CL = 50 pF; VCC = 2 Vtyp 38 · max 75 ns6
tt ttAny output; CL = 50 pF; VCC = 4.5 Vtyp 8 · max 15 ns6
tt ttAny output; CL = 50 pF; VCC = 6 Vtyp 6 · max 13 ns6
fmax fmaxCL = 50 pF; VCC = 2 V; TA = –40°C to 85°Cmin 5 MHz7
fmax fmaxCL = 50 pF; VCC = 2 V; TA = –40°C to 125°Cmin 4.2 MHz7
fmax fmaxCL = 50 pF; VCC = 4.5 V; TA = –40°C to 85°Cmin 25 MHz7
fmax fmaxCL = 50 pF; VCC = 4.5 V; TA = –40°C to 125°Cmin 21 MHz7
fmax fmaxCL = 50 pF; VCC = 6 V; TA = –40°C to 85°Cmin 29 MHz7
fmax fmaxCL = 50 pF; VCC = 6 V; TA = –40°C to 125°Cmin 25 MHz7
tpd tpdSH/LD to QH or complementary QH; CL = 50 pF; VCC = 2 V; TA = –40°C to 85°Cmax 190 ns7
tpd tpdSH/LD to QH or complementary QH; CL = 50 pF; VCC = 2 V; TA = –40°C to 125°Cmax 225 ns7
tpd tpdSH/LD to QH or complementary QH; CL = 50 pF; VCC = 4.5 V; TA = –40°C to 85°Cmax 38 ns7
tpd tpdSH/LD to QH or complementary QH; CL = 50 pF; VCC = 4.5 V; TA = –40°C to 125°Cmax 45 ns7
tpd tpdSH/LD to QH or complementary QH; CL = 50 pF; VCC = 6 V; TA = –40°C to 85°Cmax 32 ns7
tpd tpdSH/LD to QH or complementary QH; CL = 50 pF; VCC = 6 V; TA = –40°C to 125°Cmax 38 ns7
tpd tpdCLK to QH or complementary QH; CL = 50 pF; VCC = 2 V; TA = –40°C to 85°Cmax 190 ns7
tpd tpdCLK to QH or complementary QH; CL = 50 pF; VCC = 2 V; TA = –40°C to 125°Cmax 225 ns7
tpd tpdCLK to QH or complementary QH; CL = 50 pF; VCC = 4.5 V; TA = –40°C to 85°Cmax 38 ns7
tpd tpdCLK to QH or complementary QH; CL = 50 pF; VCC = 4.5 V; TA = –40°C to 125°Cmax 45 ns7
tpd tpdCLK to QH or complementary QH; CL = 50 pF; VCC = 6 V; TA = –40°C to 85°Cmax 32 ns7
tpd tpdCLK to QH or complementary QH; CL = 50 pF; VCC = 6 V; TA = –40°C to 125°Cmax 38 ns7
tpd tpdH to QH or complementary QH; CL = 50 pF; VCC = 2 V; TA = –40°C to 85°Cmax 190 ns7
tpd tpdH to QH or complementary QH; CL = 50 pF; VCC = 2 V; TA = –40°C to 125°Cmax 225 ns7
tpd tpdH to QH or complementary QH; CL = 50 pF; VCC = 4.5 V; TA = –40°C to 85°Cmax 38 ns7
tpd tpdH to QH or complementary QH; CL = 50 pF; VCC = 4.5 V; TA = –40°C to 125°Cmax 45 ns7
tpd tpdH to QH or complementary QH; CL = 50 pF; VCC = 6 V; TA = –40°C to 85°Cmax 32 ns7
tpd tpdH to QH or complementary QH; CL = 50 pF; VCC = 6 V; TA = –40°C to 125°Cmax 38 ns7
tt ttAny output; CL = 50 pF; VCC = 2 V; TA = –40°C to 85°Cmax 95 ns7
tt ttAny output; CL = 50 pF; VCC = 2 V; TA = –40°C to 125°Cmax 110 ns7
tt ttAny output; CL = 50 pF; VCC = 4.5 V; TA = –40°C to 85°Cmax 19 ns7
tt ttAny output; CL = 50 pF; VCC = 4.5 V; TA = –40°C to 125°Cmax 22 ns7
tt ttAny output; CL = 50 pF; VCC = 6 V; TA = –40°C to 85°Cmax 16 ns7
tt ttAny output; CL = 50 pF; VCC = 6 V; TA = –40°C to 125°Cmax 19 ns7
Clock frequency fclockVCC = 2 Vmax 6 MHz7
Clock frequency fclockVCC = 4.5 Vmax 31 MHz7
Clock frequency fclockVCC = 6 Vmax 36 MHz7
Pulse duration twSH/LD low; VCC = 2 Vmin 80 ns7
Pulse duration twSH/LD low; VCC = 4.5 Vmin 16 ns7
Pulse duration twSH/LD low; VCC = 6 Vmin 14 ns7
Pulse duration twCLK high or low; VCC = 2 Vmin 80 ns7
Pulse duration twCLK high or low; VCC = 4.5 Vmin 16 ns7
Pulse duration twCLK high or low; VCC = 6 Vmin 14 ns7
Set-up time tsuSH/LD high before CLK↑; VCC = 2 Vmin 80 ns8
Set-up time tsuSH/LD high before CLK↑; VCC = 4.5 Vmin 16 ns8
Set-up time tsuSH/LD high before CLK↑; VCC = 6 Vmin 14 ns8
Set-up time tsuSER before CLK↑; VCC = 2 Vmin 40 ns8
Set-up time tsuSER before CLK↑; VCC = 4.5 Vmin 8 ns8
Set-up time tsuSER before CLK↑; VCC = 6 Vmin 7 ns8
Set-up time tsuCLK INH low before CLK↑; VCC = 2 Vmin 100 ns8
Set-up time tsuCLK INH low before CLK↑; VCC = 4.5 Vmin 20 ns8
Set-up time tsuCLK INH low before CLK↑; VCC = 6 Vmin 17 ns8
Set-up time tsuCLK INH high before CLK↑; VCC = 2 Vmin 40 ns8
Set-up time tsuCLK INH high before CLK↑; VCC = 4.5 Vmin 8 ns8
Set-up time tsuCLK INH high before CLK↑; VCC = 6 Vmin 7 ns8
Set-up time tsuData before SH/LD↓; VCC = 2 Vmin 100 ns8
Set-up time tsuData before SH/LD↓; VCC = 4.5 Vmin 20 ns8
Set-up time tsuData before SH/LD↓; VCC = 6 Vmin 17 ns8
Hold time thSER data after CLK↑; VCC = 2 Vmin 5 ns8
Hold time thSER data after CLK↑; VCC = 4.5 Vmin 5 ns8
Hold time thSER data after CLK↑; VCC = 6 Vmin 5 ns8
Hold time thPAR data after SH/LD↓; VCC = 2 Vmin 5 ns8
Hold time thPAR data after SH/LD↓; VCC = 4.5 Vmin 5 ns8
Hold time thPAR data after SH/LD↓; VCC = 6 Vmin 5 ns8
Clock frequency fclockVCC = 2 V, TA = –40°C to 85°Cmax 5 MHz9
Clock frequency fclockVCC = 2 V, TA = –40°C to 125°Cmax 4.2 MHz9
Clock frequency fclockVCC = 4.5 V, TA = –40°C to 85°Cmax 25 MHz9
Clock frequency fclockVCC = 4.5 V, TA = –40°C to 125°Cmax 21 MHz9
Clock frequency fclockVCC = 6 V, TA = –40°C to 85°Cmax 29 MHz9
Clock frequency fclockVCC = 6 V, TA = –40°C to 125°Cmax 25 MHz9
Pulse duration twSH/LD low, VCC = 2 V, TA = –40°C to 85°Cmin 100 ns9
Pulse duration twSH/LD low, VCC = 2 V, TA = –40°C to 125°Cmin 120 ns9
Pulse duration twSH/LD low, VCC = 4.5 V, TA = –40°C to 85°Cmin 20 ns9
Pulse duration twSH/LD low, VCC = 4.5 V, TA = –40°C to 125°Cmin 24 ns9
Pulse duration twSH/LD low, VCC = 6 V, TA = –40°C to 85°Cmin 17 ns9
Pulse duration twSH/LD low, VCC = 6 V, TA = –40°C to 125°Cmin 20 ns9
Pulse duration twCLK high or low, VCC = 2 V, TA = –40°C to 85°Cmin 100 ns9
Pulse duration twCLK high or low, VCC = 2 V, TA = –40°C to 125°Cmin 120 ns9
Pulse duration twCLK high or low, VCC = 4.5 V, TA = –40°C to 85°Cmin 20 ns9
Pulse duration twCLK high or low, VCC = 4.5 V, TA = –40°C to 125°Cmin 24 ns9
Pulse duration twCLK high or low, VCC = 6 V, TA = –40°C to 85°Cmin 17 ns9
Pulse duration twCLK high or low, VCC = 6 V, TA = –40°C to 125°Cmin 20 ns9
Set-up time tsuSH/LD high before CLK↑, VCC = 2 V, TA = –40°C to 85°Cmin 100 ns10
Set-up time tsuSH/LD high before CLK↑, VCC = 2 V, TA = –40°C to 125°Cmin 120 ns10
Set-up time tsuSH/LD high before CLK↑, VCC = 4.5 V, TA = –40°C to 85°Cmin 20 ns10
Set-up time tsuSH/LD high before CLK↑, VCC = 4.5 V, TA = –40°C to 125°Cmin 24 ns10
Set-up time tsuSH/LD high before CLK↑, VCC = 6 V, TA = –40°C to 85°Cmin 17 ns10
Set-up time tsuSH/LD high before CLK↑, VCC = 6 V, TA = –40°C to 125°Cmin 20 ns10
Set-up time tsuSER before CLK↑, VCC = 2 V, TA = –40°C to 85°Cmin 50 ns10
Set-up time tsuSER before CLK↑, VCC = 2 V, TA = –40°C to 125°Cmin 60 ns10
Set-up time tsuSER before CLK↑, VCC = 4.5 V, TA = –40°C to 85°Cmin 10 ns10
Set-up time tsuSER before CLK↑, VCC = 4.5 V, TA = –40°C to 125°Cmin 12 ns10
Set-up time tsuSER before CLK↑, VCC = 6 V, TA = –40°C to 85°Cmin 9 ns10
Set-up time tsuSER before CLK↑, VCC = 6 V, TA = –40°C to 125°Cmin 10 ns10
Set-up time tsuCLK INH low before CLK↑, VCC = 2 V, TA = –40°C to 85°Cmin 125 ns10
Set-up time tsuCLK INH low before CLK↑, VCC = 2 V, TA = –40°C to 125°Cmin 150 ns10
Set-up time tsuCLK INH low before CLK↑, VCC = 4.5 V, TA = –40°C to 85°Cmin 25 ns10
Set-up time tsuCLK INH low before CLK↑, VCC = 4.5 V, TA = –40°C to 125°Cmin 30 ns10
Set-up time tsuCLK INH low before CLK↑, VCC = 6 V, TA = –40°C to 85°Cmin 21 ns10
Set-up time tsuCLK INH low before CLK↑, VCC = 6 V, TA = –40°C to 125°Cmin 25 ns10
Set-up time tsuCLK INH high before CLK↑, VCC = 2 V, TA = –40°C to 85°Cmin 50 ns10
Set-up time tsuCLK INH high before CLK↑, VCC = 2 V, TA = –40°C to 125°Cmin 60 ns10
Set-up time tsuCLK INH high before CLK↑, VCC = 4.5 V, TA = –40°C to 85°Cmin 10 ns10
Set-up time tsuCLK INH high before CLK↑, VCC = 4.5 V, TA = –40°C to 125°Cmin 12 ns10
Set-up time tsuCLK INH high before CLK↑, VCC = 6 V, TA = –40°C to 85°Cmin 9 ns10
Set-up time tsuCLK INH high before CLK↑, VCC = 6 V, TA = –40°C to 125°Cmin 10 ns10
Set-up time tsuData before SH/LD↓, VCC = 2 V, TA = –40°C to 85°Cmin 125 ns10
Set-up time tsuData before SH/LD↓, VCC = 2 V, TA = –40°C to 125°Cmin 150 ns10
Set-up time tsuData before SH/LD↓, VCC = 4.5 V, TA = –40°C to 85°Cmin 25 ns10
Set-up time tsuData before SH/LD↓, VCC = 4.5 V, TA = –40°C to 125°Cmin 30 ns10
Set-up time tsuData before SH/LD↓, VCC = 6 V, TA = –40°C to 85°Cmin 21 ns10
Set-up time tsuData before SH/LD↓, VCC = 6 V, TA = –40°C to 125°Cmin 26 ns10
Hold time thSER data after CLK↑, VCC = 2 V, TA = –40°C to 125°Cmin 5 ns10
Hold time thSER data after CLK↑, VCC = 4.5 V, TA = –40°C to 125°Cmin 5 ns10
Hold time thSER data after CLK↑, VCC = 6 V, TA = –40°C to 125°Cmin 5 ns10
Hold time thPAR data after SH/LD↓, VCC = 2 V, TA = –40°C to 125°Cmin 5 ns10
Hold time thPAR data after SH/LD↓, VCC = 4.5 V, TA = –40°C to 125°Cmin 5 ns10
Hold time thPAR data after SH/LD↓, VCC = 6 V, TA = –40°C to 125°Cmin 5 ns10
Power dissipation capacitance CpdTA = 25°C, No loadtyp 75 pF10

Pins, by the datasheet

16
1 SH/LD
Shift or load input; high shifts data, low loads data from parallel inputs. · p. 3
2 CLK
Clock input. · p. 3
3 E
Parallel Input. · p. 3
4 F
Parallel Input. · p. 3
5 G
Parallel Input. · p. 3
6 H
Parallel Input. · p. 3
7 QH
Complementary Serial Output. · p. 3
8 GND
Ground Pin. · p. 3
9 QH
Serial Output. · p. 3
10 SER
Serial Input. · p. 3
11 A
Parallel Input. · p. 3
12 B
Parallel Input. · p. 3
13 C
Parallel Input. · p. 3
14 D
Parallel Input. · p. 3
15 CLK INH
Clock inhibit; high prevents output changes. · p. 3
16 VCC
Power Pin. · p. 3

Ordering codes, by the datasheet

3
SN74HC165D
SOIC (16) · D package; nominal body size 10.00 mm × 6.20 mm · p. 1
SN74HC165PWRG4
TSSOP · PW, 16 pins, package quantity 2000, operating temperature -40 to 125°C · p. 18
SN74HC165PWT
TSSOP · PW, 16 pins, package quantity 250, operating temperature -40 to 125°C · p. 18

Open-source boards using it

2
  • 2 layers176.4 × 133.2 mmMainPCB v0.92, the printed circuit board in 3D

    MainPCB v0.92

    FilmNeverDie/Farbung

    A open source project based on FilmNeverDie's CP800 film processing machine

    207 parts25BSD-3-Clause
  • 4 layers458.2 × 164 mmMeridian W104, the printed circuit board in 3D

    Meridian W104

    charancs926-png/Meridian-W104

    A Keyboard named Meridian W104

    257 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SN74HC165D?

Yes. The symbol is 74xx:74HC165 and the footprint Package_SO:SOIC-16_3.9x9.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SN74HC165D?

SOIC-16, with 16 pins. Its footprint is drawn on this page.

Where is the SN74HC165D datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the SN74HC165D?

JLCPCB lists it as part C61060, with 58,812 in stock; the sellers' links on this page open their listings.

What can replace the SN74HC165D?

Parts like it in the library: the SN74HC165PW by Texas Instruments, the SN74HC165N by Texas Instruments, the SN74HC165DB by Texas Instruments and the SN74HC165QPWRQ1 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SN74HC165D?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.