Skip to the content
12345678910111213141516

SN74HC163N

Texas InstrumentsExtended

-40℃~+85℃ 1 2V~6V 36MHz 37ns 4 Divide-by-2 Rising Edge Synchronous Synchronous Up Counter DIP-16 Counters, Dividers ROHS

Part id
ti/SN74HC163N
Category
Counters, Dividers
Package
DIP-16
Pins
16
In stock
43 at JLCPCB (C2893)
Used on
4 open-source boards

Overview

The SN74HC163N is a counters, Divider made by Texas Instruments in a DIP-16 package with 16 pins. -40℃~+85℃ 1 2V~6V 36MHz 37ns 4 Divide-by-2 Rising Edge Synchronous Synchronous Up Counter DIP-16 Counters, Dividers ROHS.

PCBKit's library has its KiCad symbol (74xx:74LS163, from KiCad's library) and its footprint (Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 43 are in stock at JLCPCB (part C2893). 4 open-source boards in 2 repositories on GitHub use it.

Symbol

1MR2CP3D04D15D26D37CEP8GND9PE10CET11Q312Q213Q114Q015TC16VCC
74xx:74LS163From KiCad's library

Footprint

12345678910111213141516
Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

16
The pins of the SN74HC163N
PinNameType
1MRInput
2CPInput
3D0Input
4D1Input
5D2Input
6D3Input
7CEPInput
8GNDPower in
9PEInput
10CETInput
11Q3Output
12Q2Output
13Q1Output
14Q0Output
15TCOutput
16VCCPower in

Open-source boards using it

4
  • 2 layers100.5 × 162.5 mmOVN, the printed circuit board in 3D

    OVN

    Skab101/OvnProjekt

    A fully hardware-based oven control system designed and built with analog + digital electronics only — no microcontroller or pre-programmed ICs. All schematics and PCBs were created in KiCad.

    76 parts
  • 2 layers100 × 110 mmCOMMANDS COUNTER, the printed circuit board in 3D

    COMMANDS COUNTER

    Iluhaprog/IN-machine

    Homemade computer architecture. Schemes, model and tools.

    66 parts
  • 2 layers103 × 112.5 mmDigital stryring v2 local, the printed circuit board in 3D

    Digital stryring v2 local

    Skab101/OvnProjekt

    A fully hardware-based oven control system designed and built with analog + digital electronics only — no microcontroller or pre-programmed ICs. All schematics and PCBs were created in KiCad.

    27 parts
  • 2 layers137.5 × 129 mmLocal digital ovn, the printed circuit board in 3D

    Local digital ovn

    Skab101/OvnProjekt

    A fully hardware-based oven control system designed and built with analog + digital electronics only — no microcontroller or pre-programmed ICs. All schematics and PCBs were created in KiCad.

    26 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SN74HC163N?

Yes. The symbol is 74xx:74LS163 and the footprint Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SN74HC163N?

DIP-16, with 16 pins. Its footprint is drawn on this page.

Where is the SN74HC163N datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the SN74HC163N?

JLCPCB lists it as part C2893, with 43 in stock; the sellers' links on this page open their listings.

What can replace the SN74HC163N?

Parts like it in the library: the CD4017BED by GREENMICRO, the CD4017CN by HGSEMI, the CD4518BE by HGSEMI and the CD4520BE by HGSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SN74HC163N?

4 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.