4 layers288.5 × 95 mm
OTTO Beta Main
bitfieldaudio/otto-hardware
OTTO hardware files for upcoming beta. WORK IN PROGRESS
331 parts37
SN74HC14D
Texas InstrumentsExtended
-40℃~+85℃ 1 1.5V~4.2V 21ns@6V,50pF 2V~6V 2uA 300mV~1.2V 5.2mA 5.2mA 6 74HC Series Schmitt trigger SOIC-14 Inverters ROHS
- Part id
- ti/SN74HC14D
- Category
- Inverters
- Package
- SOIC-14
- Pins
- 14
- In stock
- 183,583 at JLCPCB (C6820)
- Used on
- 6 open-source boards
Overview
The SN74HC14D is an inverter made by Texas Instruments in a SOIC-14 package with 14 pins. -40℃~+85℃ 1 1.5V~4.2V 21ns@6V,50pF 2V~6V 2uA 300mV~1.2V 5.2mA 5.2mA 6 74HC Series Schmitt trigger SOIC-14 Inverters ROHS.
PCBKit's library has its KiCad symbol (74xx:74HC14, from KiCad's library) and its footprint (Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, from KiCad's library), ready for a KiCad board. 183,583 are in stock at JLCPCB (part C6820). 6 open-source boards in 4 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
12- Supply, least
- 2 V · VCC, recommended operating min · p. 4
- Supply, most
- 6 V · VCC, recommended operating max · p. 4
- Supply, absolute maximum
- 7 V · VCC, absolute max · p. 4
- Works from
- -40 °C · Operating temperature min · p. 1
- Works up to
- 85 °C · Operating temperature max · p. 1
- Junction, hottest
- 150 °C · Junction temperature absolute max · p. 4
- A pin gives at most
- 25 mA · Continuous output source or sink current absolute max · p. 4
- Takes working
- 20 µA · VCC supply current max, 6 V, inputs at rails, IO = 0, -40°C to 85°C · p. 5
- Junction to air (D (SOIC))
- 133.6 K/W · Junction-to-ambient thermal resistance · p. 4
- Junction to case (D (SOIC))
- 89 K/W · Junction-to-case top thermal resistance · p. 4
- Junction to board (D (SOIC))
- 89.5 K/W · Junction-to-board thermal resistance · p. 4
- Edge
- 6 ns · Output transition-time typical, VCC = 6 V, TA = 25°C · p. 6
What it is and has
6- Logic
- Six independent inverters with Schmitt-trigger inputs · p. 9
- Buffered inputs
- Yes · p. 1
- Fan-out
- Up to 10 LSTTL loads · p. 1
- Outputs
- Balanced CMOS push-pull · p. 9
- Clamp diodes
- Positive and negative clamping diodes on inputs and outputs · p. 10
- Package
- SOIC (14), nominal 8.70mm × 3.90mm · p. 1
Around it
1- cap Not specified
- between VCC and GND; Decoupling capacitor; place physically close to the device and electrically close to both supply pins. · p. 12
Specifications
74| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage VCC | Over operating free-air temperature range | min -0.5 · max 7 V | 4 |
| Input clamp current(2) IIK | VI < 0 or VI > VCC; limit ±20 mA | max 20 mA | 4 |
| Output clamp current(2) IOK | VO < 0; limit ±20 mA | max 20 mA | 4 |
| Continuous output current IO | VO = 0 to VCC; limit ±25 mA | max 25 mA | 4 |
| Continuous current through VCC or GND | Limit ±50 mA | max 50 mA | 4 |
| Junction temperature(3) TJ | Guaranteed by design | max 150 °C | 4 |
| Storage temperature Tstg | min -60 · max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; value ±2000 V | max 2000 V | 4 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101; value ±1500 V | max 1500 V | 4 |
| Supply voltage VCC | Nominal 5 V | min 2 · max 6 V | 4 |
| Input voltage VI | Maximum VCC | min 0 V | 4 |
| Output voltage VO | Maximum VCC | min 0 V | 4 |
| Junction-to-ambient thermal resistance RθJA | SN74HC14, D (SOIC), 14 pins | typ 133.6 °C/W | 4 |
| Junction-to-case (top) thermal resistance RθJC(top) | SN74HC14, D (SOIC), 14 pins | typ 89 °C/W | 4 |
| Junction-to-board thermal resistance RθJB | SN74HC14, D (SOIC), 14 pins | typ 89.5 °C/W | 4 |
| Junction-to-top characterization parameter ΨJT | SN74HC14, D (SOIC), 14 pins | typ 45.5 °C/W | 4 |
| Junction-to-board characterization parameter ΨJB | SN74HC14, D (SOIC), 14 pins | typ 89.1 °C/W | 4 |
| Positive switching threshold VT+ | VCC = 2 V; TA = 25°C | min 0.7 · typ 1.2 · max 1.5 V | 5 |
| Positive switching threshold VT+ | VCC = 2 V; TA = -40°C to 85°C | min 0.7 · max 1.5 V | 5 |
| Positive switching threshold VT+ | VCC = 4.5 V; TA = 25°C | min 1.55 · typ 2.5 · max 3.13 V | 5 |
| Positive switching threshold VT+ | VCC = 4.5 V; TA = -40°C to 85°C | min 1.55 · max 3.13 V | 5 |
| Positive switching threshold VT+ | VCC = 6 V; TA = 25°C | min 2.1 · typ 3.3 · max 4.2 V | 5 |
| Positive switching threshold VT+ | VCC = 6 V; TA = -40°C to 85°C | min 2.1 · max 4.2 V | 5 |
| Negative switching threshold VT- | VCC = 2 V; TA = 25°C | min 0.3 · typ 0.6 · max 1 V | 5 |
| Negative switching threshold VT- | VCC = 2 V; TA = -40°C to 85°C | min 0.3 · max 1 V | 5 |
| Negative switching threshold VT- | VCC = 4.5 V; TA = 25°C | min 0.9 · typ 1.6 · max 2.45 V | 5 |
| Negative switching threshold VT- | VCC = 4.5 V; TA = -40°C to 85°C | min 0.9 · max 2.45 V | 5 |
| Negative switching threshold VT- | VCC = 6 V; TA = 25°C | min 1.2 · typ 2 · max 3.2 V | 5 |
| Negative switching threshold VT- | VCC = 6 V; TA = -40°C to 85°C | min 1.2 · max 3.2 V | 5 |
| Hysteresis (VT+ - VT-) ΔVT | VCC = 2 V; TA = 25°C | min 0.2 · typ 0.6 · max 1.2 V | 5 |
| Hysteresis (VT+ - VT-) ΔVT | VCC = 2 V; TA = -40°C to 85°C | min 0.2 · max 1.2 V | 5 |
| Hysteresis (VT+ - VT-) ΔVT | VCC = 4.5 V; TA = 25°C | min 0.4 · typ 0.9 · max 2.1 V | 5 |
| Hysteresis (VT+ - VT-) ΔVT | VCC = 4.5 V; TA = -40°C to 85°C | min 0.4 · max 2.1 V | 5 |
| Hysteresis (VT+ - VT-) ΔVT | VCC = 6 V; TA = 25°C | min 0.5 · typ 1.3 · max 2.5 V | 5 |
| Hysteresis (VT+ - VT-) ΔVT | VCC = 6 V; TA = -40°C to 85°C | min 0.5 · max 2.5 V | 5 |
| High-level output voltage VOH | VI = VIH or VIL; IOH = –20 uA; VCC = 2 V; TA = 25°C | min 1.9 · typ 1.998 V | 5 |
| High-level output voltage VOH | VI = VIH or VIL; IOH = –20 uA; VCC = 2 V; TA = -40°C to 85°C | min 1.9 V | 5 |
| High-level output voltage VOH | VI = VIH or VIL; IOH = –20 uA; VCC = 4.5 V; TA = 25°C | min 4.4 · typ 4.499 V | 5 |
| High-level output voltage VOH | VI = VIH or VIL; IOH = –20 uA; VCC = 4.5 V; TA = -40°C to 85°C | min 4.4 V | 5 |
| High-level output voltage VOH | VI = VIH or VIL; IOH = –20 uA; VCC = 6 V; TA = 25°C | min 5.9 · typ 5.999 V | 5 |
| High-level output voltage VOH | VI = VIH or VIL; IOH = –20 uA; VCC = 6 V; TA = -40°C to 85°C | min 5.9 V | 5 |
| High-level output voltage VOH | VI = VIH or VIL; IOH = –4 mA; VCC = 4.5 V; TA = 25°C | min 3.98 · typ 4.3 V | 5 |
| High-level output voltage VOH | VI = VIH or VIL; IOH = –4 mA; VCC = 4.5 V; TA = -40°C to 85°C | min 3.84 V | 5 |
| High-level output voltage VOH | VI = VIH or VIL; IOH = –5.2 mA; VCC = 6 V; TA = 25°C | min 5.48 · typ 5.8 V | 5 |
| High-level output voltage VOH | VI = VIH or VIL; IOH = –5.2 mA; VCC = 6 V; TA = -40°C to 85°C | min 5.34 V | 5 |
| Low-level output voltage VOL | VI = VIH or VIL; IOL = 20 uA; VCC = 2 V; TA = 25°C | typ 0.002 · max 0.1 V | 5 |
| Low-level output voltage VOL | VI = VIH or VIL; IOL = 20 uA; VCC = 2 V; TA = -40°C to 85°C | max 0.1 V | 5 |
| Low-level output voltage VOL | VI = VIH or VIL; IOL = 20 uA; VCC = 4.5 V; TA = 25°C | typ 0.001 · max 0.1 V | 5 |
| Low-level output voltage VOL | VI = VIH or VIL; IOL = 20 uA; VCC = 4.5 V; TA = -40°C to 85°C | max 0.1 V | 5 |
| Low-level output voltage VOL | VI = VIH or VIL; IOL = 20 uA; VCC = 6 V; TA = 25°C | typ 0.001 · max 0.1 V | 5 |
| Low-level output voltage VOL | VI = VIH or VIL; IOL = 20 uA; VCC = 6 V; TA = -40°C to 85°C | max 0.1 V | 5 |
| Low-level output voltage VOL | VI = VIH or VIL; IOL = 4 mA; VCC = 4.5 V; TA = 25°C | typ 0.17 · max 0.26 V | 5 |
| Low-level output voltage VOL | VI = VIH or VIL; IOL = 4 mA; VCC = 4.5 V; TA = -40°C to 85°C | max 0.33 V | 5 |
| Low-level output voltage VOL | VI = VIH or VIL; IOL = 5.2 mA; VCC = 6 V; TA = 25°C | typ 0.15 · max 0.26 V | 5 |
| Low-level output voltage VOL | VI = VIH or VIL; IOL = 5.2 mA; VCC = 6 V; TA = -40°C to 85°C | max 0.33 V | 5 |
| Input leakage current II | VI = VCC or 0; VCC = 6 V; TA = 25°C; limit ±0.1 uA | max 0.1 uA | 5 |
| Input leakage current II | VI = VCC or 0; VCC = 6 V; TA = -40°C to 85°C; limit ±1 uA | max 1 uA | 5 |
| Supply current ICC | VI = VCC or 0; IO = 0; VCC = 6 V; TA = 25°C | max 2 uA | 5 |
| Supply current ICC | VI = VCC or 0; IO = 0; VCC = 6 V; TA = -40°C to 85°C | max 20 uA | 5 |
| Input capacitance Ci | VCC = 5 V; TA = 25°C | typ 3 · max 10 pF | 5 |
| Input capacitance Ci | VCC = 5 V; TA = -40°C to 85°C | max 10 pF | 5 |
| Propagation delay tpd | A to Y; VCC = 2 V; TA = 25°C | typ 55 · max 125 ns | 6 |
| Propagation delay tpd | A to Y; VCC = 2 V; TA = –40°C to 85°C | max 155 ns | 6 |
| Propagation delay tpd | A to Y; VCC = 4.5 V; TA = 25°C | typ 12 · max 25 ns | 6 |
| Propagation delay tpd | A to Y; VCC = 4.5 V; TA = –40°C to 85°C | max 31 ns | 6 |
| Propagation delay tpd | A to Y; VCC = 6 V; TA = 25°C | typ 11 · max 21 ns | 6 |
| Propagation delay tpd | A to Y; VCC = 6 V; TA = –40°C to 85°C | max 26 ns | 6 |
| Transition-time tt | Output Y; VCC = 2 V; TA = 25°C | typ 38 · max 75 ns | 6 |
| Transition-time tt | Output Y; VCC = 2 V; TA = –40°C to 85°C | max 95 ns | 6 |
| Transition-time tt | Output Y; VCC = 4.5 V; TA = 25°C | typ 8 · max 15 ns | 6 |
| Transition-time tt | Output Y; VCC = 4.5 V; TA = –40°C to 85°C | max 19 ns | 6 |
| Transition-time tt | Output Y; VCC = 6 V; TA = 25°C | typ 6 · max 13 ns | 6 |
| Transition-time tt | Output Y; VCC = 6 V; TA = –40°C to 85°C | max 16 ns | 6 |
| Power dissipation capacitance per gate Cpd | No load; VCC = 2 V to 6 V; typical at TA = 25°C | typ 20 pF | 7 |
Pins, by the datasheet
14- 1 1A
- Channel 1, Input A · p. 3
- 2 1Y
- Channel 1, Output Y · p. 3
- 3 2A
- Channel 2, Input A · p. 3
- 4 2Y
- Channel 2, Output Y · p. 3
- 5 3A
- Channel 3, Input A · p. 3
- 6 3Y
- Channel 3, Output Y · p. 3
- 7 GND
- Ground · p. 3
- 8 4Y
- Channel 4, Output Y · p. 3
- 9 4A
- Channel 4, Input A · p. 3
- 10 5Y
- Channel 5, Output Y · p. 3
- 11 5A
- Channel 5, Input A · p. 3
- 12 6Y
- Channel 6, Output Y · p. 3
- 13 6A
- Channel 6, Input A · p. 3
- 14 VCC
- Positive Supply · p. 3
Open-source boards using it
6- 2 layers149.9 × 111.8 mm
- 4 layers145 × 80 mm
Shunt reversal freerouting source
fl4p/shunt-reversal
MOSFET H-bridge current-reversal switch for shunt thermal-EMF cancellation. Script-generated KiCad. NOT RELEASED - see DESIGN.md section 12.
100 parts - 4 layers252 × 92 mm
Cooksense
misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.
195 parts3MIT - 4 layers188 × 92 mm
Cooksense
misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.
226 parts3MIT - 4 layers145 × 80 mm
Shunt reversal noadc
fl4p/shunt-reversal
MOSFET H-bridge current-reversal switch for shunt thermal-EMF cancellation. Script-generated KiCad. NOT RELEASED - see DESIGN.md section 12.
75 parts
Parts like it
8
MC14584BD
SOIC-14-55℃~+125℃ 1 1.6V~4.6V 1uA 3.4V~10.5V 3V~18V 4000B Series 6 8.8mA 8.8mA 80ns@15V,50pF Schmitt trigger 噪声抑制功能 SOIC-14 Inverters ROHSonsemiInvertersMC14106BD
SOIC-14-55℃~+125℃ 1 14.95V 1uA 3.6V~10.8V 3V~18V 4000B Series 6 8.8mA 8.8mA 80ns@15V,50pF 900mV~4V Schmitt trigger SOIC-14 Inverters ROHSonsemiInvertersCD4007UBM/TR
SOP-14-55℃~+125℃ 1V、2.5V 3V~18V 4.2mA 4.2mA 4.95V、9.95V、14.95V 4000B Series 4V、12.5V 500nA 50mV 50ns@15V,50pF SOP-14 Inverters ROHSHGSEMIInvertersRS6G14XP
SOP-14-40℃~+125℃ 1.2V、1.9V、2.3V、2.4V、3.8V 1.65V~5.5V 100mV、300mV、400mV、450mV、550mV、550mV 1uA 24mA 24mA 3.1ns@3.3V,50pF 6 Power shutdown protection、Noise suppression function Schmitt trigger SOP-14 Inverters ROHSJiangsu RUNIC TechInvertersIW4069UBDT
SOP-14-55℃~+125℃ 1 1V~2.5V 1uA 3.4mA 3.4mA 3V~18V 4.95V~14.95V 4V~12.5V 50mV 50ns@15V,50pF 6 SOP-14 Inverters ROHSIKSEMICONInvertersSN74ALS1005D
SOIC-140℃~+70℃ 1 100uA 24mA 2V 30ns@5V,50pF 4.5V~5.5V 6 74ALS 800mV SOIC-14 Inverters ROHSTexas InstrumentsInvertersCD4007BM/TR
SOP-1420ns@10V,15pF 3V~15V Noise suppression function SOP-14 Inverters ROHSHGSEMIInverters74HC14D
SO-14-40℃~+125℃ 1 1.5V~4.2V 21ns@6V,50pF 2V~6V 2uA 300mV~1.2V 5.2mA 5.2mA 6 74HC Schmitt trigger SOIC-14 Inverters ROHSNexperiaInverters
Questions
Is there a KiCad symbol and footprint for the SN74HC14D?
Yes. The symbol is 74xx:74HC14 and the footprint Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the SN74HC14D?
SOIC-14, with 14 pins. Its footprint is drawn on this page.
Where is the SN74HC14D datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the SN74HC14D?
JLCPCB lists it as part C6820, with 183,583 in stock; the sellers' links on this page open their listings.
What can replace the SN74HC14D?
Parts like it in the library: the MC14584BD by onsemi, the MC14106BD by onsemi, the CD4007UBM/TR by HGSEMI and the RS6G14XP by Jiangsu RUNIC Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the SN74HC14D?
6 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.