Skip to the content
1234567891011121314151617181920

SN74AHCT245N

Texas InstrumentsExtended

-40℃~+125℃ 1 11ns@5V,50pF 4.5V~5.5V 40uA 74AHCT 8 8mA 8mA Bidirectional Edge rate controllable、Output enable、Level shifting Tri-State PDIP-20 Buffers, Drivers, Receivers, Transceivers ROHS

Part id
ti/SN74AHCT245N
Category
Buffers, Drivers, Receivers, Transceivers
Package
PDIP-20
Pins
20
In stock
122 at JLCPCB (C1548096)
Used on
2 open-source boards

Overview

The SN74AHCT245N is a buffers, Drivers, Receivers, Transceiver made by Texas Instruments in a PDIP-20 package with 20 pins. -40℃~+125℃ 1 11ns@5V,50pF 4.5V~5.5V 40uA 74AHCT 8 8mA 8mA Bidirectional Edge rate controllable、Output enable、Level shifting Tri-State PDIP-20 Buffers, Drivers, Receivers, Transceivers ROHS.

PCBKit's library has its KiCad symbol (74xx:74HC245, from KiCad's library) and its footprint (Package_DIP:DIP-20_W7.62mm, from KiCad's library), ready for a KiCad board. 122 are in stock at JLCPCB (part C1548096). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1A->B2A03A14A25A36A47A58A69A710GND11B712B613B514B415B316B217B118B019CE20VCC
74xx:74HC245From KiCad's library

Footprint

1234567891011121314151617181920
Package_DIP:DIP-20_W7.62mmFrom KiCad's library

Pinout

20
The pins of the SN74AHCT245N
PinNameType
1A->BInput
2A0Tri-state
3A1Tri-state
4A2Tri-state
5A3Tri-state
6A4Tri-state
7A5Tri-state
8A6Tri-state
9A7Tri-state
10GNDPower in
11B7Tri-state
12B6Tri-state
13B5Tri-state
14B4Tri-state
15B3Tri-state
16B2Tri-state
17B1Tri-state
18B0Tri-state
19CEInput
20VCCPower in

Open-source boards using it

2
  • 2 layers129.5 × 57.1 mmArduino 286 5V, the printed circuit board in 3D

    Arduino 286 5V

    dbalsom/arduinoX86

    An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs

    35 parts114
  • 4 layers133.5 × 100.3 mmZx50 Cpu, the printed circuit board in 3D

    Zx50 Cpu

    mmosko/Zx50

    This is the primary CPU board for the Zx50 8-slot passive backplane system. It hosts the Z80 microprocessor (running at 5 MHz to 10 MHz) and acts as the master controller for the primary bus.

    26 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SN74AHCT245N?

Yes. The symbol is 74xx:74HC245 and the footprint Package_DIP:DIP-20_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SN74AHCT245N?

PDIP-20, with 20 pins. Its footprint is drawn on this page.

Where is the SN74AHCT245N datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the SN74AHCT245N?

JLCPCB lists it as part C1548096, with 122 in stock; the sellers' links on this page open their listings.

What can replace the SN74AHCT245N?

Parts like it in the library: the 74HC541D by GR, the SN74HC240N(XBLW) by XBLW, the SN74HC244N(XBLW) by XBLW and the 74HC245N by HGSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SN74AHCT245N?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.