Skip to the content
7

OPT3001DNPT

Texas InstrumentsExtended

Low power/sleep mode、Spectral correction/filtering、Interrupt/event trigger、Automatic gain control USON-6-EP(2.1x2.1) Ambient Light Sensors ROHS

Part id
ti/OPT3001DNPT
Category
Ambient Light Sensors
Package
USON-6-EP(2.1x2.1)
Pins
6
In stock
0 at JLCPCB (C544852)
Used on
6 open-source boards

Overview

The OPT3001DNPT is an ambient Light Sensor made by Texas Instruments in a USON-6-EP(2.1x2.1) package with 7 pins. Low power/sleep mode、Spectral correction/filtering、Interrupt/event trigger、Automatic gain control USON-6-EP(2.1x2.1) Ambient Light Sensors ROHS.

PCBKit's library has its KiCad symbol (dk_Optical-Sensors-Ambient-Light-IR-UV-Sensors:OPT3001DNPT, from Digikey) and its footprint (digikey-footprints:UDFN-6-1EP_2x2mm_USON, from Digikey), ready for a KiCad board. JLCPCB lists it (part C544852). 6 open-source boards in 4 repositories on GitHub use it.

Symbol

1VDD2ADR3GND4SCL5INT6SDA7GND
dk_Optical-Sensors-Ambient-Light-IR-UV-Sensors:OPT3001DNPTFrom Digikey

Footprint

7
digikey-footprints:UDFN-6-1EP_2x2mm_USONFrom Digikey

Pinout

7
The pins of the OPT3001DNPT
PinNameType
1VDDPower in
2ADRInput
3GNDPower in
4SCLInput
5INTOutput
6SDAInput/output
7GNDPower in

Open-source boards using it

6
  • 2 layers43 × 50 mmEsp pmsa, the printed circuit board in 3D

    Esp pmsa

    neggles/esp-pmsa

    Makefile uses Jan Mrázek's KiKit, which I cannot recommend enough, and therefore has to be available on your system.

    28 parts1CC-BY-SA-4.0
  • 2 layers22 × 60 mmDecabox pcb, the printed circuit board in 3D

    Decabox pcb

    arvindsa/decabox

    A compact, intelligent battery management system for 6× Decapo batteries used with cochlear speech processors. This project monitors cell voltage, ambient light, and battery state-of-charge in real-time, with visual…

    61 parts
  • 2 layers82 × 99 mmSolar panel side Y plus, the printed circuit board in 3D

    Solar panel side Y plus

    stanford-ssi/sapling-avionics

    2S3P Li-ion battery pack for CubeSat designs. - Fits 18650 cells (like the LG INR18650-MJ1) - Meets maximum capacity requirements of common CubeSat integrators - Uses components with radiation testing heritage -…

    24 parts
  • 2 layers97 × 97.4 mmSolar panel side Z minus, the printed circuit board in 3D

    Solar panel side Z minus

    stanford-ssi/sapling-avionics

    2S3P Li-ion battery pack for CubeSat designs. - Fits 18650 cells (like the LG INR18650-MJ1) - Meets maximum capacity requirements of common CubeSat integrators - Uses components with radiation testing heritage -…

    25 parts
  • 2 layers97 × 97.4 mmSolar panel side Z plus, the printed circuit board in 3D

    Solar panel side Z plus

    stanford-ssi/sapling-avionics

    2S3P Li-ion battery pack for CubeSat designs. - Fits 18650 cells (like the LG INR18650-MJ1) - Meets maximum capacity requirements of common CubeSat integrators - Uses components with radiation testing heritage -…

    23 parts

Questions

Is there a KiCad symbol and footprint for the OPT3001DNPT?

Yes. The symbol is dk_Optical-Sensors-Ambient-Light-IR-UV-Sensors:OPT3001DNPT and the footprint digikey-footprints:UDFN-6-1EP_2x2mm_USON, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPT3001DNPT?

USON-6-EP(2.1x2.1), with 7 pins. Its footprint is drawn on this page.

Where is the OPT3001DNPT datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPT3001DNPT?

JLCPCB lists it as part C544852, with 0 in stock; the sellers' links on this page open their listings.

Which open-source boards use the OPT3001DNPT?

6 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.