OPA381AIDGK
Texas InstrumentsExtended
-40℃~+125℃ 1 100nV/℃ 100pA 10mA 10nV/√Hz@>10kHz 12V/us 18MHz 2.7V~5.5V 3pA 7uV 800uA 95dB VSSOP-8 Precision Op Amps ROHS
- Part id
- ti/OPA381AIDGK
- Category
- Special Purpose Amplifiers
- Package
- VSSOP-8
- Pins
- 8
- In stock
- 520 at JLCPCB (C92496)
Overview
The OPA381AIDGK is a special Purpose Amplifier made by Texas Instruments in a VSSOP-8 package with 8 pins. -40℃~+125℃ 1 100nV/℃ 100pA 10mA 10nV/√Hz@>10kHz 12V/us 18MHz 2.7V~5.5V 3pA 7uV 800uA 95dB VSSOP-8 Precision Op Amps ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:OPA381AIDGKT, from EasyEDA) and its footprint (Package_SO:VSSOP-8_3x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. 520 are in stock at JLCPCB (part C92496).
Symbol
Footprint
From the datasheet
9- Supply, least
- 2.7 V · VS, recommended operating min · p. 3
- Supply, most
- 5.5 V · VS, recommended operating max · p. 3
- Supply, absolute maximum
- 7 V · VS, absolute max · p. 2
- Works from
- -40 °C · Operating temperature min · p. 3
- Works up to
- 125 °C · Operating temperature max · p. 3
- Junction, hottest
- 150 °C · Junction temperature absolute max · p. 2
- Takes working
- 800 µA · Quiescent current per amplifier, IO = 0 A, typical · p. 3
- Takes at most
- 1.1 mA · Quiescent current per amplifier over temperature, max · p. 3
- Junction to air (MSOP-8)
- 150 K/W · Junction to ambient, typical · p. 3
What it is and has
9- Transimpedance bandwidth
- Over 250kHz · p. 1
- Dynamic range
- 5 decades · p. 1
- Voltage noise
- 10nV/√Hz · p. 1
- Bias current
- 3pA · p. 1
- Offset voltage
- 25µV max · p. 1
- Offset drift
- 0.1µV/°C max · p. 1
- Gain bandwidth
- 18MHz · p. 1
- Overload recovery
- Fast · p. 1
- Package options
- DFN-8, MSOP-8 · p. 1
Around it
1- res 10kΩ
- between Out and −5V; Optional pulldown resistor RP in Figure 3 to achieve output swing to 0V. · p. 9
Specifications
39| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Voltage Supply | max 7 V | 2 | |
| Signal Input Terminals(2), Current | Limit stated as ±10mA | max 10 mA | 2 |
| Operating Temperature Range | min -40 · max 125 °C | 2 | |
| Storage Temperature Range | min -65 · max 150 °C | 2 | |
| Junction Temperature | max 150 °C | 2 | |
| Lead Temperature (soldering, 10s) | soldering, 10s | max 300 °C | 2 |
| OPA381 ESD Rating (Human Body Model) | OPA381 | max 2000 V | 2 |
| Input Offset Voltage VOS | VS = +5V, VCM = 0V | typ 7 · max 25 uV | 3 |
| Drift dVOS/dT | typ 0.03 · max 0.1 uV/°C | 3 | |
| vs Power Supply PSRR | VS = +2.7V to +5.5V, VCM = 0V | typ 3.5 · max 20 uV/V | 3 |
| Over Temperature PSRR | VS = +2.7V to +5.5V, VCM = 0V; TA = −40°C to +125°C | max 20 uV/V | 3 |
| Channel Separation, dc | typ 1 uV/V | 3 | |
| Input Bias Current IB | VCM = VS/2; maximum stated as ±50 pA | typ 3 · max 50 pA | 3 |
| Input Offset Current IOS | VCM = VS/2; maximum stated as ±100 pA | typ 6 · max 100 pA | 3 |
| Input Voltage Noise, f = 0.1Hz to 10Hz en | VS = +5V, VCM = 0V | typ 3 uVPP | 3 |
| Input Voltage Noise Density, f = 10kHz en | VS = +5V, VCM = 0V | typ 70 nV/√Hz | 3 |
| Input Voltage Noise Density, f > 1MHz en | VS = +5V, VCM = 0V | typ 10 nV/√Hz | 3 |
| Input Current Noise Density, f = 10kHz in | VS = +5V, VCM = 0V | typ 20 fA/√Hz | 3 |
| Common-Mode Rejection Ratio CMRR | VS = +5V, (V−) < VCM < (V+) − 1.8V | min 95 · typ 110 dB | 3 |
| Differential Capacitance | typ 1 pF | 3 | |
| Open-Loop Voltage Gain AOL | 0.05V < VO < (V+) − 0.6V, VCM = VS/2, VS = 5V | min 110 · typ 135 dB | 3 |
| Open-Loop Voltage Gain AOL | 0V < VO < (V+) − 0.6V, VCM = 0V, RP = 10kΩ to −5V(2), VS = 5V | min 106 · typ 135 dB | 3 |
| Gain-Bandwidth Product GBW | typ 18 MHz | 3 | |
| Slew Rate SR | G = +1 | typ 12 V/us | 3 |
| Settling Time, 0.0015%(3) | VS = +5V, 4V Step, G = +1, OPA381; transimpedance frequency of 250kHz | typ 7 us | 3 |
| Overload Recovery Time(4), (5) | VIN • G = > VS; return to linear operation from positive rail | typ 200 ns | 3 |
| Voltage Output Swing from Positive Rail | RL = 10kΩ | typ 400 · max 600 mV | 3 |
| Voltage Output Swing from Negative Rail | RL = 10kΩ | typ 30 · max 50 mV | 3 |
| Voltage Output Swing from Positive Rail | RP = 10kΩ to −5V(2) | typ 400 · max 600 mV | 3 |
| Voltage Output Swing from Negative Rail | RP = 10kΩ to −5V(2) | typ -20 · max 0 mV | 3 |
| Output Current IOUT | typ 10 mA | 3 | |
| Short-Circuit Current ISC | typ 20 mA | 3 | |
| Open-Loop Output Impedance RO | F = 1MHz, IO = 0 | typ 250 Ω | 3 |
| Specified Voltage Range VS | min 2.7 · max 5.5 V | 3 | |
| Quiescent Current (per amplifier) IQ | IO = 0A | typ 0.8 · max 1 mA | 3 |
| Over Temperature IQ | Quiescent current per amplifier; IO = 0A; TA = −40°C to +125°C | max 1.1 mA | 3 |
| Specified and Operating Range | min -40 · max 125 °C | 3 | |
| Storage Range | min -65 · max 150 °C | 3 | |
| Thermal Resistance qJA | MSOP-8 | typ 150 °C/W | 3 |
Pins, by the datasheet
8- 1 NC
- No internal connection. · p. 2
- 2 −In
- Inverting input. · p. 2
- 3 +In
- Noninverting input. · p. 2
- 4 V−
- Negative supply. · p. 2
- 5 NC
- No internal connection. · p. 2
- 6 Out
- Amplifier output. · p. 2
- 7 V+
- Positive supply. · p. 2
- 8 NC
- No internal connection. · p. 2
Ordering codes, by the datasheet
7- OPA381AIDGKR
- VSSOP (DGK) · 8 pins; −40 to 125°C; 2500, LARGE T&R; Active · p. 15
- OPA381AIDGKR.B
- VSSOP (DGK) · 8 pins; −40 to 125°C; 2500, LARGE T&R; Active; lead finish Call TI · p. 15
- OPA381AIDGKT
- VSSOP (DGK) · 8 pins; −40 to 125°C; 250, SMALL T&R; Last Time Buy · p. 15
- OPA381AIDGKT.B
- VSSOP (DGK) · 8 pins; −40 to 125°C; 250, SMALL T&R; Last Time Buy; lead finish Call TI · p. 15
- OPA381AIDRBT
- SON (DRB) · 8 pins; −40 to 125°C; 250, SMALL T&R; Last Time Buy · p. 15
- OPA381AIDRBT.B
- SON (DRB) · 8 pins; −40 to 125°C; 250, SMALL T&R; Last Time Buy · p. 15
- OPA381AIDRBR
- DFN-8 · −40°C to +125°C; Tape and Reel, 3000 · p. 2
Parts like it
7XTR117AIDGK
VSSOP-8-40℃~+125℃ 1 100uV 130uA 35nA 7.5V~40V Built-in current limiting / output protection、Overvoltage protection VSSOP-8 Special Purpose Amplifiers ROHSTexas InstrumentsSpecial Purpose AmplifiersOPA380AIDGKR
VSSOP-8-40℃~+125℃ 0.03uV/℃ 1 110dB 2.7V~5.5V 3pA 4uV 6pA 80V/us 90MHz Overvoltage protection、Zero drift / auto-zero Transimpedance Amplifier VSSOP-8 Operational Amplifier ROHSTexas InstrumentsSpecial Purpose AmplifiersOPA2381AIDGK
VSSOP-8-40℃~+125℃ 0.03uV/℃ 0.8mA 110dB 12V/us 18MHz 2.7V~5.5V 3pA 6pA 7uV Dual Overvoltage protection、Zero drift / auto-zero Transimpedance Amplifier VSSOP-8 Special Purpose Amplifiers ROHSTexas InstrumentsSpecial Purpose AmplifiersTLV2302IDGK
VSSOP-8-40℃~+125℃ -8V~-1.25V、1.25V~8V 1.4uA 100pA 16V 2 2.5V~16V 250uV 25pA 3uV/℃ 5us 76dB CMOS Open-drain Rail-to-Rail Input, Rail-to-Rail Output VSSOP-8 Comparators ROHSTexas InstrumentsSpecial Purpose AmplifiersLM392DGK
VSSOP-8VSSOP-8 Special Purpose Amplifiers ROHSTexas InstrumentsSpecial Purpose AmplifiersOPA2380AIDGKRG4
VSSOP-8-40℃~+125℃ Overvoltage Protection、Zero drift / auto-zero Transimpedance Amplifier VSSOP-8 Operational Amplifier ROHSTexas InstrumentsSpecial Purpose AmplifiersOPA380AIDGKRG4
VSSOP-8-40℃~+125℃ Overvoltage Protection、Zero drift / auto-zero、Built-in filter Transimpedance Amplifier VSSOP-8 Operational Amplifier ROHSTexas InstrumentsSpecial Purpose Amplifiers
Questions
Is there a KiCad symbol and footprint for the OPA381AIDGK?
Yes. The symbol is EasyEDA_Cloud:OPA381AIDGKT and the footprint Package_SO:VSSOP-8_3x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the OPA381AIDGK?
VSSOP-8, with 8 pins. Its footprint is drawn on this page.
Where is the OPA381AIDGK datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the OPA381AIDGK?
JLCPCB lists it as part C92496, with 520 in stock; the sellers' links on this page open their listings.
What can replace the OPA381AIDGK?
Parts like it in the library: the XTR117AIDGK by Texas Instruments, the OPA380AIDGKR by Texas Instruments, the OPA2381AIDGK by Texas Instruments and the TLV2302IDGK by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.