OPA320AIDBV
Texas InstrumentsExtended
-2.75V~-900mV、900mV~2.75V -40℃~+125℃ 0.2pA 0.9pA 1 1.45mA 1.5uV/℃ 1.8V~5.5V 10V/us 114dB 150uV 20MHz 65mA 7nV/√Hz@10kHz EMI filtering/RF suppression、ESD protection、Built-in compensation、Reverse-phase input protection、Enable/shutdown function Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Precision Op Amps ROHS
- Part id
- ti/OPA320AIDBV
- Category
- Precision Op Amps
- Package
- SOT-23-5
- Pins
- 5
- In stock
- 22,783 at JLCPCB (C92494)
Overview
The OPA320AIDBV is a precision Op Amp made by Texas Instruments in a SOT-23-5 package with 5 pins. -2.75V~-900mV、900mV~2.75V -40℃~+125℃ 0.2pA 0.9pA 1 1.45mA 1.5uV/℃ 1.8V~5.5V 10V/us 114dB 150uV 20MHz 65mA 7nV/√Hz@10kHz EMI filtering/RF suppression、ESD protection、Built-in compensation、Reverse-phase input protection、Enable/shutdown function Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Precision Op Amps ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:OPA343NA-HX, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 22,783 are in stock at JLCPCB (part C92494).
Symbol
Footprint
From the datasheet
12- Supply, least
- 1.8 V · V+ relative to V–, recommended operating min · p. 6
- Supply, most
- 5.5 V · V+ relative to V–, recommended operating max · p. 6
- Supply, absolute maximum
- 6 V · V+ relative to V–, absolute max · p. 6
- Works from
- -40 °C · TA, specified operating min · p. 6
- Works up to
- 125 °C · TA, specified operating max · p. 6
- Junction, hottest
- 150 °C · TJ, absolute max · p. 6
- Takes working
- 1.5 mA · typical quiescent current, IO = 0 mA, VS = 5.5 V, TA = 25°C · p. 9
- Takes at most
- 1.85 mA · max quiescent current, IO = 0 mA, VS = 5.5 V, TA = –40°C to 125°C · p. 9
- A pin gives at most
- 10 mA · signal input pin current magnitude, absolute max · p. 6
- Junction to air (DBV (SOT-23))
- 219.3 K/W · junction-to-ambient thermal resistance · p. 6
- Junction to board (DBV (SOT-23))
- 57.5 K/W · junction-to-board thermal resistance · p. 6
- Junction to case (DBV (SOT-23))
- 107.5 K/W · junction-to-case(top) thermal resistance · p. 6
What it is and has
7- Input/output
- Rail-to-Rail I/O · p. 1
- Input offset voltage
- 150 µV maximum · p. 1
- Input bias current
- 0.9 pA maximum · p. 1
- Voltage noise
- 7 nV/√Hz at 10 kHz · p. 1
- Bandwidth
- 20 MHz · p. 1
- Stability
- Unity-gain stable · p. 1
- Package
- SOT-23, 5 pins, 2.90 mm × 1.60 mm · p. 1
Specifications
56| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply, VS = (V+) – (V–) VS | over operating free-air temperature range | max 6 V | 6 |
| Signal input pin (2) | Current | min -10 · max 10 mA | 6 |
| Operating range, TA TA | min -40 · max 150 °C | 6 | |
| Junction, TJ TJ | max 150 °C | 6 | |
| Storage, Tstg Tstg | min -65 · max 150 °C | 6 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 (1); ± rating magnitude | max 4000 V | 6 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101 (2); ± rating magnitude | max 1000 V | 6 |
| Electrostatic discharge V(ESD) | Machine model (MM); ± rating magnitude | max 200 V | 6 |
| Specified voltage VS | over operating free-air temperature range | min 1.8 · max 5.5 V | 6 |
| Specified temperature TA | min -40 · max 125 °C | 6 | |
| Junction-to-ambient thermal resistance (1) RθJA | OPA320, DBV (SOT-23), 5 PINS | typ 219.3 °C/W | 6 |
| Junction-to-case(top) thermal resistance RθJC(top) | OPA320, DBV (SOT-23), 5 PINS | typ 107.5 °C/W | 6 |
| Junction-to-board thermal resistance RθJB | OPA320, DBV (SOT-23), 5 PINS | typ 57.5 °C/W | 6 |
| Junction-to-top characterization parameter ψJT | OPA320, DBV (SOT-23), 5 PINS | typ 7.4 °C/W | 6 |
| Junction-to-board characterization parameter ψJB | OPA320, DBV (SOT-23), 5 PINS | typ 56.9 °C/W | 6 |
| Input offset voltage VOS | TA = 25°C | typ 40 · max 150 uV | 7 |
| Input offset voltage vs temperature dVOS/dT | VS = 5.5 V, TA = –40°C to 125°C | typ 1.5 · max 5 uV/°C | 7 |
| Input offset voltage vs power supply PSR | VS = 1.8 V to 5.5 V, TA = 25°C | typ 5 · max 20 uV/V | 7 |
| Input offset voltage vs power supply PSR | VS = 1.8 V to 5.5 V, TA = –40°C to 125°C | max 15 uV/V | 7 |
| Common-mode rejection ratio CMRR | VS = 5.5 V, (V–) – 0.1 V < VCM < (V+) + 0.1 V, TA = 25°C | min 100 · typ 114 dB | 7 |
| Common-mode rejection ratio CMRR | VS = 5.5 V, (V–) – 0.1 V < VCM < (V+) + 0.1 V, TA = –40°C to 125°C | min 96 dB | 7 |
| Input bias current IB | TA = 25°C; ± magnitudes | typ 0.2 · max 0.9 pA | 7 |
| Input bias current IB | TA = –40°C to 85°C; ± magnitude | max 50 pA | 7 |
| Input bias current IB | OPA320; TA = –40°C to 125°C; ± magnitude | max 600 pA | 7 |
| Input offset current IOS | TA = 25°C; ± magnitudes | typ 0.2 · max 0.9 pA | 7 |
| Input offset current IOS | TA = –40°C to 85°C; ± magnitude | max 50 pA | 7 |
| Input offset current IOS | TA = –40°C to 125°C; ± magnitude | max 400 pA | 7 |
| Input voltage noise | f = 0.1 Hz to 10 Hz | typ 2.8 uVPP | 8 |
| Input voltage noise density en | f = 1 kHz | typ 8.5 nV/√Hz | 8 |
| Input voltage noise density en | f = 10 kHz | typ 7 nV/√Hz | 8 |
| Input current noise density in | f = 1 kHz | typ 0.6 fA/√Hz | 8 |
| Differential | INPUT CAPACITANCE | typ 5 pF | 8 |
| Common mode | INPUT CAPACITANCE | typ 4 pF | 8 |
| Open-loop voltage gain AOL | 0.1 V < VO < (V+) – 0.1 V, RL = 10 kΩ, TA = 25°C | min 114 · typ 132 dB | 8 |
| Open-loop voltage gain AOL | 0.1 V < VO < (V+) – 0.1 V, RL = 10 kΩ, TA = –40°C to 125°C | min 100 · typ 130 dB | 8 |
| Open-loop voltage gain AOL | 0.2 V < VO < (V+) – 0.2 V, RL = 2 kΩ, TA = 25°C | min 108 · typ 123 dB | 8 |
| Open-loop voltage gain AOL | 0.2 V < VO < (V+) – 0.2 V, RL = 2 kΩ, TA = –40°C to 125°C | min 96 · typ 130 dB | 8 |
| Phase margin PM | VS = 5 V, CL = 50 pF | typ 47 ° | 8 |
| Gain bandwidth product GBP | VS = 5 V, CL = 50 pF; Unity gain | typ 20 MHz | 8 |
| Slew rate SR | VS = 5 V, CL = 50 pF; G = +1 | typ 10 V/us | 8 |
| Settling time tS | VS = 5 V, CL = 50 pF; to 0.1%, 2-V step, G = +1 | typ 0.25 us | 8 |
| Settling time tS | VS = 5 V, CL = 50 pF; to 0.01%, 2-V step, G = +1 | typ 0.32 us | 8 |
| Settling time tS | VS = 5 V, CL = 50 pF; to 0.0015%, 2-V step, G = +1 (1); based on simulation | typ 0.5 us | 8 |
| Overload recovery time | VS = 5 V, CL = 50 pF; VIN × G > VS | typ 100 ns | 8 |
| Total harmonic distortion + noise (2) THD+N | VS = 5 V, CL = 50 pF; VO = 4 VPP, G = 1, f = 10 kHz, RL = 10 kΩ; third-order filter, bandwidth = 80 kHz at –3 dB | typ 0.0005 % | 8 |
| Total harmonic distortion + noise (2) THD+N | VS = 5 V, CL = 50 pF; VO = 2 VPP, G = 1, f = 10 kHz, RL = 600 Ω; third-order filter, bandwidth = 80 kHz at –3 dB | typ 0.0011 % | 8 |
| Voltage output swing from both rails VO | RL = 10 kΩ, TA = 25°C | typ 10 · max 20 mV | 8 |
| Voltage output swing from both rails VO | RL = 2 kΩ, TA = 25°C | typ 25 · max 35 mV | 8 |
| Voltage output swing from both rails VO | RL = 10 kΩ, TA = –40°C to 125°C | max 30 mV | 8 |
| Voltage output swing from both rails VO | RL = 2 kΩ, TA = –40°C to 125°C | max 45 mV | 8 |
| Short-circuit current ISC | VS = 5.5 V; ± magnitude | typ 65 mA | 8 |
| Open-loop output resistance RO | IO = 0 mA, f = 1 MHz | typ 90 Ω | 8 |
| Specified voltage VS | min 1.8 · max 5.5 V | 9 | |
| Quiescent current per amplifier, OPA320 and OPA320S IQ | OPA320; IO = 0 mA, VS = 5.5 V, TA = 25°C | typ 1.5 · max 1.75 mA | 9 |
| Quiescent current per amplifier, OPA320 and OPA320S IQ | OPA320; IO = 0 mA, VS = 5.5 V, TA = –40°C to 125°C | max 1.85 mA | 9 |
| Power-on time | V+ = 0 V to 5 V, to 90% IQ level | typ 28 us | 9 |
Pins, by the datasheet
5- 1 OUT
- Output. · p. 4
- 2 V–
- Negative (lowest) power supply. · p. 4
- 3 +IN
- Positive (noninverting) input. · p. 4
- 4 –IN
- Negative (inverting) input. · p. 4
- 5 V+
- Positive (highest) power supply. · p. 4
Parts like it
8OPA197IDBV
SOT-23-5-18V~-2.25V、2.25V~18V -40℃~+125℃ 1 100uV 10MHz 140dB 1mA 2.5uV/℃ 20V/us 20pA 4.5V~36V 5.5nV/√Hz@1kHz 5pA 65mA EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHSTexas InstrumentsPrecision Op AmpsLM7321MFX
SOT-23-5-15V~15V -40℃~+125℃ 1 1.1mA 1.2uA 100dB 15nV/√Hz@2kHz 18V/us 2.5V~32V 200nA 20MHz 2uV/℃ 65mA 700uV ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Precision Op Amps ROHSTexas InstrumentsPrecision Op AmpsOPA192IDBV
SOT-23-5-18V~-2.25V、2.25V~18V -40℃~+125℃ 1 10MHz 140dB 1mA 200nV/℃ 20V/us 2pA 4.5V~36V 5.5nV/√Hz@1kHz 5pA 5uV 65mA EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Precision Op Amps ROHSTexas InstrumentsPrecision Op AmpsOPA354AIDBV
SOT-23-5-2.75V~-1.25V、1.25V~2.75V -40℃~+125℃ 1 100MHz 100mA 150V/us 1pA 2.5V~5.5V 2mV 3pA 4.9mA 4uV/℃ 6.5nV/√Hz@1MHz 80dB Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHSTexas InstrumentsPrecision Op AmpsMS8311
SOT-23-5-40℃~+125℃ 0.1pA 0.2pA 1 1.5mA 1.5uV/℃ 100dB 10MHz 11.5nV/√Hz@1kHz 2.7V~5.5V 65uV 7V/us 80mA Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Precision Op Amps ROHSHangzhou Ruimeng TechPrecision Op AmpsAD8603AUJZ-REEL7
TSOT-23-5-2.5V~-900mV、900mV~2.5V -40℃~+125℃ 0.1V/us 0.2pA 0.5pA 1 1.8V~5V 100dB 1uV/℃ 22nV/√Hz@10kHz 400kHz 50uA 50uV 70mA Built-in compensation、Overvoltage protection、Reverse-phase input protection Rail-to-Rail Input, Rail-to-Rail Output TSOT-23-5 Precision Op Amps ROHSAnalog DevicesPrecision Op AmpsGS8557-TR
SOT-23-5-2.75V~-1.25V、1.25V~2.75V -40℃~+125℃ 1 1.3mA 100dB 100pA 109mA 10pA 13MHz 2.5V~5.5V 27nV/℃ 5uV 8V/us EMI filtering/RF suppression、Zero drift / auto-zero Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Precision Op Amps ROHSGainsilPrecision Op AmpsOPA182IDBV
SOT-23-5-18V~-2.25V、2.25V~18V -40℃~+125℃ 1 10V/us 140pA 168dB 3nV/℃ 4.5V~36V 450nV 5.7nV/√Hz@1kHz 50pA 5MHz 65mA 850uA EMI filtering/RF suppression、Zero drift / auto-zero、Reverse-phase input protection Rail-to-rail output SOT-23-5 Precision Op Amps ROHSTexas InstrumentsPrecision Op Amps
Questions
Is there a KiCad symbol and footprint for the OPA320AIDBV?
Yes. The symbol is EasyEDA_Cloud:OPA343NA-HX and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the OPA320AIDBV?
SOT-23-5, with 5 pins. Its footprint is drawn on this page.
Where is the OPA320AIDBV datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the OPA320AIDBV?
JLCPCB lists it as part C92494, with 22,783 in stock; the sellers' links on this page open their listings.
What can replace the OPA320AIDBV?
Parts like it in the library: the OPA197IDBV by Texas Instruments, the LM7321MFX by Texas Instruments, the OPA192IDBV by Texas Instruments and the OPA354AIDBV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.