Skip to the content
12345678

OPA2134PA

Texas InstrumentsExtended

-18V~-2.5V、2.5V~18V -40℃~+85℃ 0.00008% 106dB 2-Channel 5mA PDIP-8 Audio Amplifiers ROHS

Part id
ti/OPA2134PA
Category
Audio Amplifiers
Package
PDIP-8
Pins
8
In stock
60 at JLCPCB (C1346118)
Used on
9 open-source boards

Overview

The OPA2134PA is an audio Amplifier made by Texas Instruments in a PDIP-8 package with 8 pins. -18V~-2.5V、2.5V~18V -40℃~+85℃ 0.00008% 106dB 2-Channel 5mA PDIP-8 Audio Amplifiers ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:OPA2134, from KiCad's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 60 are in stock at JLCPCB (part C1346118). 9 open-source boards in 7 repositories on GitHub use it.

Symbol

1-2+3
Amplifier_Operational:OPA2134From KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the OPA2134PA
PinNameType
1—Output
2-Input
3+Input
4V-Power in
5+Input
6-Input
7—Output
8V+Power in

Open-source boards using it

9See all 9
  • 2 layers88.9 × 73.7 mmHeadphone amp v2, the printed circuit board in 3D

    Headphone amp v2

    r4ptor/headphone-DAC-with-amp

    A portable (headphone) USB DAC with a separate conversion stage.

    95 parts3GPL-3.0
  • 2 layers141.3 × 120.7 mmAmp, the printed circuit board in 3D

    Amp

    alpibrusl/cancho-afm

    An automatic AFM (and a high-speed one as the second goal): software in cancho, controller in cancho-hdl, interface in cancho-ui, hardware open only. Design stage.

    69 parts
  • 2 layers108 × 80 mmGhost fader, the printed circuit board in 3D

    Ghost fader

    chris-albert/ghost-fader

    MIDI-controlled volume and pan for balanced stereo synths (Teensy 4.0 + PGA2310)

    82 parts
  • 2 layers66 × 21.7 mmDetector de particulas (FISICA III), the printed circuit board in 3D

    Detector de particulas (FISICA III)

    hernansilva02/fotodiodo-project

    Proyecto académico/open-hardware para el diseño, simulación y fabricación de un detector basado en fotodiodo PIN con amplificador transimpedancia (TIA).

    22 parts
  • 2 layers90 × 80 mmBass, the printed circuit board in 3D

    Bass

    kaileh57/Bass

    An electric bass

    66 parts
  • 2 layers363.2 × 200 mm.kicad_pcb, the printed circuit board in 3D

    .kicad_pcb

    ak1211/IR-control-amp

    Infra Red remote control amplifier

    125 parts1MIT
  • 2 layers150 × 38 mmGhost fader stack main, the printed circuit board in 3D

    Ghost fader stack main

    chris-albert/ghost-fader

    MIDI-controlled volume and pan for balanced stereo synths (Teensy 4.0 + PGA2310)

    68 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the OPA2134PA?

Yes. The symbol is Amplifier_Operational:OPA2134 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPA2134PA?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the OPA2134PA datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPA2134PA?

JLCPCB lists it as part C1346118, with 60 in stock; the sellers' links on this page open their listings.

What can replace the OPA2134PA?

Parts like it in the library: the LM386N-4 by Texas Instruments, the LME49720NA by Texas Instruments, the TDA2822N by HGSEMI and the LM386N by HTC Korea TAEJIN Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPA2134PA?

9 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.