Overview
The OPA2132P is a FET Input Amplifier made by Texas Instruments in a PDIP-8 package with 8 pins. -18V~-2.5V、2.5V~18V -40℃~+85℃ 2 20V/us 2pA 2uV/℃ 36mA 4mA 500uV 5pA 8MHz 8nV/√Hz@1kHz 96dB 9V~36V Built-in compensation、High capacitive load driving PDIP-8 FET Input Amplifiers ROHS.
PCBKit's library has its KiCad symbol (Operational Amplifiers:Operational Amplifier x2 Type1 [alt], from CERN's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1346520).
Symbol
Footprint
Parameters
15- Common Mode Rejection Ratio(CMRR)
- 96dB
- Dual Supply
- 2.5V~18V, -18V~-2.5V
- Features
- Built-in compensation, High capacitive load driving
- Gain Bandwidth Product
- 8MHz
- Ib - Input Bias Current
- 5pA
- Input Offset Current(Ios)
- 2pA
- Input Offset Voltage Drift(Vos TC)
- 2uV/℃
- Noise density(eN)
- 8nV/√Hz@1kHz
- Number of Channels
- 2
- Operating Temperature
- -40℃~+85℃
- Output Current
- 36mA
- Quiescent Current(Iq)
- 4mA
- Single Supply
- 9V~36V
- Slew Rate
- 20V/us
- Vos - Input Offset Voltage
- 500uV
Order codes
1- OPA2132PLCSC C1346520
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | OUT | Output |
| 2 | IN- | Input |
| 3 | IN+ | Input |
| 4 | V- | Power in |
| 5 | IN+ | Input |
| 6 | IN- | Input |
| 7 | OUT | Output |
| 8 | V+ | Power in |
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/ti/OPA2132P" title="OPA2132P in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/ti/OPA2132P.jpg" alt="OPA2132P" width="1200" height="900">[](https://pcbkit.io/parts/ti/OPA2132P)Questions
Is there a KiCad symbol and footprint for the OPA2132P?
Yes. The symbol is Operational Amplifiers:Operational Amplifier x2 Type1 [alt] and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the OPA2132P?
PDIP-8, with 8 pins. Its footprint is drawn on this page.
Where is the OPA2132P datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the OPA2132P?
JLCPCB lists it as part C1346520, with 0 in stock; the sellers' links on this page open their listings.
What can replace the OPA2132P?
Parts like it in the library: the TL072CN(LX) by lingxingic, the TL081CP(LX) by lingxingic, the TLE2071CP by Texas Instruments and the TL071CP(LX) by lingxingic. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Parts like it
8
TL072CN(LX)
DIP-8-40℃~+85℃ 1.4mA 10uV/℃ 13V/us 15nV/√Hz@1kHz 2 3.5MHz 30pA 3mV 40mA 5pA 86dB DIP-8 FET Input Amplifiers ROHSlingxingicFET Input AmplifiersTL081CP(LX)
DIP-8-40℃~+85℃ 1 1.4mA 10uV/℃ 13V/us 15nV/√Hz@1kHz 3.5MHz 30pA 3mV 40mA 5pA 86dB DIP-8 FET Input Amplifiers ROHSlingxingicFET Input AmplifiersTLE2071CP
PDIP-8-5V~5V、5V~15V 0℃~+70℃ 1 1.6mA 12nV/√Hz@10kHz 3.2uV/℃ 340uV 35V/us 45mA 5nA 5pA 89dB 9.4MHz Short-Circuit Protection PDIP-8 FET Input Amplifiers ROHSTexas InstrumentsFET Input AmplifiersTL071CP(LX)
DIP-8-40℃~+85℃ 1 1.4mA 10uV/℃ 13V/us 15nV/√Hz@1kHz 3.5MHz 30pA 3mV 40mA 5pA 86dB DIP-8 FET Input Amplifiers ROHSlingxingicFET Input AmplifiersAD845KNZ
PDIP-8-18V~-4.75V、4.75V~18V 0℃~+70℃ 1 1.5uV/℃ 100V/us 100uV 113dB 15pA 16MHz 25nV/√Hz@1kHz 500pA 50mA Built-in compensation、High capacitive load driving PDIP-8 FET Input Amplifiers ROHSAnalog DevicesFET Input AmplifiersTLE2072ACP
PDIP-8-19V~-2.25V、2.25V~19V 0℃~+70℃ 10MHz 12nV/√Hz@10kHz 1pA 2 2.3uV/℃ 2.9mA 300uV 45V/us 45mA 5pA 89dB Short-Circuit Protection PDIP-8 FET Input Amplifiers ROHSTexas InstrumentsFET Input AmplifiersAD743KN
PDIP-80℃~+70℃ 102dB 1uV/℃ 2.8V/us 250pA 30pA 40mA 8.1mA PDIP-8 FET Input AmplifiersAnalog DevicesFET Input AmplifiersOP249GPZ
PDIP-8-40℃~+85℃ 2 22V/us 4.7MHz 400uV 40pA 50mA 6uV/℃ 7mA 90dB High capacitive load driving PDIP-8 FET Input Amplifiers ROHSAnalog DevicesFET Input Amplifiers