OPA1654AIPW
Texas InstrumentsExtended
-18V~-2.25V、2.25V~18V -40℃~+85℃ 0.00005% 2mA 4-Channel ESD protection TSSOP-14 FET Input Amplifiers ROHS
- Part id
- ti/OPA1654AIPW
- Category
- Audio Amplifiers
- Package
- TSSOP-14
- Pins
- 14
- In stock
- 856 at JLCPCB (C544430)
Overview
The OPA1654AIPW is an audio Amplifier made by Texas Instruments in a TSSOP-14 package with 14 pins. -18V~-2.25V、2.25V~18V -40℃~+85℃ 0.00005% 2mA 4-Channel ESD protection TSSOP-14 FET Input Amplifiers ROHS.
PCBKit's library has its KiCad symbol (Horizon_ic:OPA1654AIPW, from Horizon) and its footprint (Package_SO:TSSOP-14_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 856 are in stock at JLCPCB (part C544430).
Symbol
Footprint
From the datasheet
9- Supply, least
- 4.5 V · V+ – V–, recommended operating min · p. 5
- Supply, most
- 36 V · V+ – V–, recommended operating max · p. 5
- Supply, absolute maximum
- 40 V · V+ – V–, absolute max · p. 5
- Works from
- -40 °C · recommended operating ambient min · p. 5
- Works up to
- 85 °C · recommended operating ambient max · p. 5
- Junction, hottest
- 200 °C · junction absolute max · p. 5
- Junction to air (PW (TSSOP))
- 126.9 K/W · junction-to-ambient thermal resistance · p. 6
- Junction to case (PW (TSSOP))
- 46.6 K/W · junction-to-case top thermal resistance · p. 6
- Junction to board (PW (TSSOP))
- 58.6 K/W · junction-to-board thermal resistance · p. 6
What it is and has
4- Channels
- 4, FET input · p. 1
- Gain-bandwidth product
- 18MHz (G = 1) · p. 1
- Unity-gain stable
- Yes · p. 1
- Output
- Rail-to-rail · p. 1
Around it
1- res 50 Ω
- between output and capacitive load; Example series isolation resistor for heavier capacitive loads. · p. 20
Specifications
46| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage, VS = (V+) – (V–) VS | over operating free-air temperature range | max 40 V | 5 |
| Input (all pins except power-supply pins) | Current; over operating free-air temperature range | min -10 · max 10 mA | 5 |
| Operating, TA TA | min -55 · max 125 °C | 5 | |
| Junction, TJ TJ | max 200 °C | 5 | |
| Storage, Tstg Tstg | min -65 · max 150 °C | 5 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ± rating | max 2000 V | 5 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101; ± rating | max 1000 V | 5 |
| Electrostatic discharge V(ESD) | Machine model (MM); ± rating | max 200 V | 5 |
| Supply voltage | Total supply voltage; equivalent dual supply ±2.25 V to ±18 V | min 4.5 · max 36 V | 5 |
| Operating temperature TA | min -40 · max 85 °C | 5 | |
| Junction-to-ambient thermal resistance RθJA | OPA1654, PW (TSSOP), 14 PINS | typ 126.9 °C/W | 6 |
| Junction-to-case (top) thermal resistance RθJC(top) | OPA1654, PW (TSSOP), 14 PINS | typ 46.6 °C/W | 6 |
| Junction-to-board thermal resistance RθJB | OPA1654, PW (TSSOP), 14 PINS | typ 58.6 °C/W | 6 |
| Junction-to-top characterization parameter ψJT | OPA1654, PW (TSSOP), 14 PINS | typ 5.5 °C/W | 6 |
| Junction-to-board characterization parameter ψJB | OPA1654, PW (TSSOP), 14 PINS | typ 57.8 °C/W | 6 |
| Total harmonic distortion + noise THD + N | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; G = 1, f = 1 kHz, VO = 3 VRMS | typ 0.00005 % | 7 |
| Total harmonic distortion + noise THD + N | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; G = 1, f = 1 kHz, VO = 3 VRMS | typ -126 dB | 7 |
| Intermodulation distortion IMD | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; G = 1, VO = 3 VRMS; SMPTE and DIN Two-Tone, 4:1 (60 Hz and 7 kHz) | typ 0.00005 % | 7 |
| Intermodulation distortion IMD | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; G = 1, VO = 3 VRMS; SMPTE and DIN Two-Tone, 4:1 (60 Hz and 7 kHz) | typ -126 dB | 7 |
| Intermodulation distortion IMD | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; G = 1, VO = 3 VRMS; DIM 30 (3-kHz square wave and 15-kHz sine wave) | typ 0.00005 % | 7 |
| Intermodulation distortion IMD | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; G = 1, VO = 3 VRMS; DIM 30 (3-kHz square wave and 15-kHz sine wave) | typ -126 dB | 7 |
| Intermodulation distortion IMD | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; G = 1, VO = 3 VRMS; CCIF Twin-Tone (19 kHz and 20 kHz) | typ 0.00005 % | 7 |
| Intermodulation distortion IMD | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; G = 1, VO = 3 VRMS; CCIF Twin-Tone (19 kHz and 20 kHz) | typ -126 dB | 7 |
| Gain-bandwidth product GBW | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; G=1 | typ 18 MHz | 7 |
| Slew rate SR | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; G = –1 | typ 10 V/us | 7 |
| Full power bandwidth | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; VO = 1 VP | typ 1.6 MHz | 7 |
| Overload recovery time | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; G = –10 | typ 1 us | 7 |
| Channel separation (dual and quad) | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; f = 1 kHz | typ -120 dB | 7 |
| Input voltage noise en | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; f = 20 Hz to 20 kHz | typ 4 uVPP | 7 |
| Input voltage noise density | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; f = 1 kHz | typ 4.5 nV/√Hz | 7 |
| Input voltage noise density | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; f = 10 kHz | typ 3.8 nV/√Hz | 7 |
| Input current noise density In | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; f = 1 kHz | typ 3 fA/√Hz | 7 |
| Input offset voltage VOS | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; VS = ±2.25 V to ±18 V; ± values | typ 0.5 · max 1.5 mV | 7 |
| Input offset voltage VOS | RL = 2 kΩ, VCM = VOUT = midsupply; VS = ±2.25 V to ±18 V, TA = –40°C to 85°C; specified by design and characterization | typ 2 · max 8 uV/°C | 7 |
| Power-supply rejection ratio PSRR | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; VS = ±2 25 V to ±18 V | typ 3 · max 8 uV/V | 7 |
| Input bias current IB | TA = 25°C, RL = 2 kΩ, VOUT = midsupply; VCM = 0 V; ± values | typ 10 · max 100 pA | 7 |
| Input offset current IOS | TA = 25°C, RL = 2 kΩ, VOUT = midsupply; VCM = 0 V; ± values | typ 10 · max 100 pA | 7 |
| Common-mode rejection ratio CMRR | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply | min 100 · typ 110 dB | 7 |
| Open-loop voltage gain AOL | TA = 25°C, VCM = midsupply; (V–) + 0.8 V ≤ VO ≤ (V+) – 0.8 V, RL = 2 kΩ | min 106 · typ 114 dB | 7 |
| Short-circuit current ISC | TA = 25°C; one channel at a time; ± value | typ 50 mA | 7 |
| Capacitive load drive CLOAD | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply | typ 100 pF | 7 |
| Specified voltage VS | Symmetrical dual supply; values are ± magnitudes | min 2.25 · max 18 V | 7 |
| Quiescent current (per channel) IQ | TA = 25°C, RL = 2 kΩ, VCM = VOUT = midsupply; IOUT = 0 A | typ 2 · max 2.5 mA | 7 |
| Quiescent current (per channel) IQ | RL = 2 kΩ, VCM = VOUT = midsupply; IOUT = 0 A, TA = –40°C to 85°C; specified by design and characterization | max 2.8 mA | 7 |
| Specified range | Temperature | min -40 · max 85 °C | 7 |
| Operating range | Temperature | min -55 · max 125 °C | 7 |
Parts like it
8DIO2133CT14
TSSOP-14-40℃~+85℃ 0.001% 112dB 11mA 2-Channel 3V~5.5V 90dB Automatic mute/no-noise switch、Enable/shutdown function、ESD protection TSSOP-14 Audio Amplifiers ROHSDIOOAudio AmplifiersTPA6138A2PW
TSSOP-14-40℃~+85℃ 0.01% 14mA 2 Pairs Differential Inputs 2-Channel 3V~3.6V 40mWx2@32Ω 80dB 96dB Automatic mute/no-noise switch、Enable/shutdown function、ESD protection Class AB TSSOP-14 Audio Amplifiers ROHSTexas InstrumentsAudio AmplifiersOPA1679IPW
TSSOP-14-40℃~+85℃ 0.0001% 2.25V~18V、4.5V~36V 2.5mA 4-Channel ESD protection TSSOP-14 Audio Amplifiers ROHSTexas InstrumentsAudio AmplifiersSGM89000YTS14G/TR
TSSOP-14-40℃~+85℃ 0.001% 10.5mA 114dB 2 Pairs Differential Inputs 2-Channel 3V~3.6V 97dB Automatic mute/no-noise switch、Enable/shutdown function Class AB TSSOP-14 Audio Amplifiers ROHSSG MicroAudio AmplifiersSGM8903YTS14G/TR
TSSOP-14-40℃~+85℃ 0.001% 10.5mA 114dB 2 Pairs Differential Inputs 2-Channel 3V~5.5V 97dB Automatic mute/no-noise switch、Enable/shutdown function Class AB TSSOP-14 Audio Amplifiers ROHSSG MicroAudio AmplifiersDRV632PW
TSSOP-14-40℃~+85℃ 3V~3.6V Mute control TSSOP-14 Audio Interface ICs ROHSTexas InstrumentsAudio AmplifiersWS742133H-14/TR
TSSOP-14-40℃~+85℃ 0.001% 112dB 12.6mA 3V~5.5V 90dB Automatic mute/no-noise switch、Enable/shutdown function、Overvoltage protection TSSOP-14 Audio Amplifiers ROHSWILLSEMIAudio AmplifiersTPA6139A2PW
TSSOP-14-40℃~+85℃ 0.005% 105dB 2 Single-Ended Inputs 2-Channel 25mA 25mWx2@32Ω 3V~3.6V 80dB TSSOP-14 Audio Amplifiers ROHSTexas InstrumentsAudio Amplifiers
Questions
Is there a KiCad symbol and footprint for the OPA1654AIPW?
Yes. The symbol is Horizon_ic:OPA1654AIPW and the footprint Package_SO:TSSOP-14_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the OPA1654AIPW?
TSSOP-14, with 14 pins. Its footprint is drawn on this page.
Where is the OPA1654AIPW datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the OPA1654AIPW?
JLCPCB lists it as part C544430, with 856 in stock; the sellers' links on this page open their listings.
What can replace the OPA1654AIPW?
Parts like it in the library: the DIO2133CT14 by DIOO, the TPA6138A2PW by Texas Instruments, the OPA1679IPW by Texas Instruments and the SGM89000YTS14G/TR by SG Micro. Check their datasheets: a part that fits the footprint may still differ in its ratings.