4 layers85 × 55 mm
MPC507A
Texas Instruments
Single-Ended 16-Channel/Differential 8-Channel CMOS ANALOG MULTIPLEXERS
- Part id
- ti/MPC507A
- Category
- Uncategorised
- Package
- SOIC28
- Pins
- 28
- Used on
- 1 open-source board
Overview
The MPC507A is an uncategorised made by Texas Instruments in a SOIC28 package with 28 pins. Single-Ended 16-Channel/Differential 8-Channel CMOS ANALOG MULTIPLEXERS.
PCBKit's library has its KiCad symbol (Analog & Interface:MPC507A, from CERN's library) and its footprint (Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
Pinout
28| Pin | Name | Type |
|---|---|---|
| 1 | V+ | Power in |
| 2 | Out_B | Output |
| 3 | NC | Passive |
| 4 | In_8B | Input |
| 5 | In_7B | Input |
| 6 | In_6B | Input |
| 7 | In_5B | Input |
| 8 | In_4B | Input |
| 9 | In_3B | Input |
| 10 | In_2B | Input |
| 11 | In_1B | Input |
| 12 | GND | Power in |
| 13 | Vref | Power in |
| 14 | NC | Passive |
| 15 | A2 | Input |
| 16 | A1 | Input |
| 17 | A0 | Input |
| 18 | Enable | Input |
| 19 | In_1A | Input |
| 20 | In_2A | Input |
| 21 | In_3A | Input |
| 22 | In_4A | Input |
| 23 | In_5A | Input |
| 24 | In_6A | Input |
| 25 | In_7A | Input |
| 26 | In_8A | Input |
| 27 | V- | Power in |
| 28 | Out_A | Output |
Open-source boards using it
1Parts like it
8
GM1640S
SOP-28UncategorisedGREENMICROAD565AJR
SOIC28High Speed 12-Bit Monolithic DACAnalog DevicesUncategorisedAD768AR
SOIC2816-Bit, 30 MSPS DACAnalog DevicesUncategorisedAD976CR
SOIC2816-Bit, 100 kSPS BiCMOS Analog-To-Digital ConverterAnalog DevicesUncategorisedADG506AKR
SOIC28CMOS 16-Channel Analog MultiplexersAnalog DevicesUncategorisedLTC1409CSW
SOIC2812-Bit, 800ksps Sampling ADC with ShutdownAnalog DevicesUncategorisedMB85R256HPF-G-BNDAE1
SOIC283.3V 256K (32K × 8) Bit CMOS Memory FRAMFUJITSU MICROELECTRONICSUncategorisedIS62C256AL-45UL
SOIC285V 32K x 8 Low Power CMOS Static RAMISSIUncategorised
Questions
Is there a KiCad symbol and footprint for the MPC507A?
Yes. The symbol is Analog & Interface:MPC507A and the footprint Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MPC507A?
SOIC28, with 28 pins. Its footprint is drawn on this page.
What can replace the MPC507A?
Parts like it in the library: the GM1640S by GREENMICRO, the AD565AJR by Analog Devices, the AD768AR by Analog Devices and the AD976CR by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MPC507A?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.