Skip to the content
12345678910111213141516

MAX3221ECPW

Texas InstrumentsExtended

0℃~+70℃ 1 1 1mA 250Kbps 3V~5.5V Transceiver Yes ±15kV TSSOP-16 RS232 ICs ROHS

Part id
ti/MAX3221ECPW
Category
RS232 ICs
Package
TSSOP-16
Pins
16
In stock
2,290 at JLCPCB (C350553)

Overview

The MAX3221ECPW is a RS232 IC made by Texas Instruments in a TSSOP-16 package with 16 pins. 0℃~+70℃ 1 1 1mA 250Kbps 3V~5.5V Transceiver Yes ±15kV TSSOP-16 RS232 ICs ROHS.

PCBKit's library has its KiCad symbol (Interface_UART:MAX3221, from KiCad's library) and its footprint (Package_SO:TSSOP-16_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 2,290 are in stock at JLCPCB (part C350553).

Symbol

1EN2C1+3V+4C1-5C2+6C2-7V-8RIN9ROUT10INVALID11DIN12FORCEON13DOUT14GND15VCC16FORCEOFF
Interface_UART:MAX3221From KiCad's library

Footprint

12345678910111213141516
Package_SO:TSSOP-16_4.4x5mm_P0.65mmFrom KiCad's library

From the datasheet

15
Supply, least
3 V · VCC, recommended operating min, 3.3 V operation · p. 5
Supply, most
3.6 V · VCC, recommended operating max, 3.3 V operation · p. 5
Supply, least
4.5 V · VCC, recommended operating min, 5 V operation · p. 5
Supply, most
5.5 V · VCC, recommended operating max, 5 V operation · p. 5
Supply, absolute maximum
6 V · VCC, absolute max · p. 4
Works from
0 °C · Operating free-air temperature min, MAX3221EC · p. 5
Works up to
70 °C · Operating free-air temperature max, MAX3221EC · p. 5
Junction, hottest
150 °C · Operating virtual junction temperature max · p. 4
Takes working
300 µA · VCC, typical, auto-power down disabled, no load, 3.3 V or 5 V, 25°C · p. 5
Takes at most
1 mA · VCC, max, auto-power down disabled, no load, 3.3 V or 5 V, 25°C · p. 5
Takes asleep
1 µA · VCC, typical, powered off, FORCEOFF at GND, 25°C · p. 5
Junction to air (PW (TSSOP))
110.9 K/W · Junction-to-ambient thermal resistance · p. 5
Junction to case (PW (TSSOP))
41.7 K/W · Junction-to-case (top) thermal resistance · p. 5
Junction to board (PW (TSSOP))
57.2 K/W · Junction-to-board thermal resistance · p. 5
Data rate, most
250 kbit/s · Maximum data rate, typical, CL = 1000 pF, RL = 3 kΩ · p. 7

What it is and has

8
RS-232 channels
1 driver, 1 receiver · p. 1
Data rate
Up to 250 kbit/s · p. 1
Standards
TIA/EIA-232-F and ITU v.28 · p. 1
Protection
±15 kV HBM ESD on RS-232 pins · p. 1
Protection
±8 kV IEC 61000-4-2 contact discharge · p. 1
Protection
±15 kV IEC 61000-4-2 air-gap discharge · p. 1
Logic compatibility
Accepts 5 V logic inputs with 3.3 V supply · p. 1
Power management
Automatic power down disables driver to save power · p. 1

Around it

6
cap 1-µF minimum
between VCC and GND; Required to meet the specified IEC-ESD level. · p. 4
cap 0.1-µF
between VCC and GND; Recommended power supply noise filter. · p. 17
cap 0.01-μF
between VCC and GND; Optional additional filter capacitor in parallel. · p. 17
cap 0.1 µF
between C1+ and C1–; C1 test condition at VCC = 3.3 V ± 0.3 V; keep traces short. · p. 5
cap 0.047 µF
between C1+ and C1–; C1 test condition at VCC = 5 V ± 0.5 V. · p. 5
cap 0.33 µF
between C2+ and C2–; C2 test condition at VCC = 5 V ± 0.5 V. · p. 5

Specifications

52
ParameterConditionsAs printedPage
Supply voltage(2) VCCmin -0.3 · max 6 V4
Positive output supply voltage(2) V+min -0.3 · max 7 V4
Negative output supply voltage(2) V–min 0.3 · max -7 V4
Supply voltage difference(2) V+ – V–max 13 V4
Input voltage VIDIN, FORCEOFF, FORCEON, ENmin -0.3 · max 6 V4
Input voltage VIRINmin -25 · max 25 V4
Output voltage VODOUTmin -13.2 · max 13.2 V4
Output voltage VOROUT, INVALIDmin -0.3 V4
Operating virtual junction temperature TJmax 150 °C4
Storage temperature Tstgmin -65 · max 150 °C4
Supply voltageVCC = 3.3 V; nominal 3.3 Vmin 3 · max 3.6 V5
Supply voltageVCC = 5 V; nominal 5 Vmin 4.5 · max 5.5 V5
Driver and control high-level input voltage VIHDIN, FORCEOFF, FORCEON, EN; VCC = 3.3 Vmin 2 V5
Driver and control high-level input voltage VIHDIN, FORCEOFF, FORCEON, EN; VCC = 5 Vmin 2.4 V5
Driver and control low-level input voltage VILDIN, FORCEOFF, FORCEON, ENmax 0.8 V5
Driver and control input voltage VIDIN, FORCEOFF, FORCEONmin 0 · max 5.5 V5
Receiver input voltage VImin -25 · max 25 V5
Operating free-air temperature TAMAX3221ECmin 0 · max 70 °C5
Junction-to-ambient thermal resistance RθJAPW (TSSOP), 16 PINStyp 110.9 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)PW (TSSOP), 16 PINStyp 41.7 °C/W5
Junction-to-board thermal resistance RθJBPW (TSSOP), 16 PINStyp 57.2 °C/W5
Junction-to-top characterization parameter ψJTPW (TSSOP), 16 PINStyp 4.2 °C/W5
Junction-to-board characterization parameter ψJBPW (TSSOP), 16 PINStyp 56.6 °C/W5
Supply current ICCAuto-power down disabled; VCC = 3.3 V or 5 V, TA = 25°C; No load, FORCEOFF and FORCEON at VCCtyp 0.3 · max 1 mA5
Supply current ICCPowered off; VCC = 3.3 V or 5 V, TA = 25°C; No load, FORCEOFF at GNDtyp 1 · max 10 uA5
Supply current ICCAuto-power down enabled; VCC = 3.3 V or 5 V, TA = 25°C; No load, FORCEOFF at VCC, FORCEON at GND, All RIN are open or groundedtyp 1 · max 10 uA5
High-level output voltage VOHDOUT at RL = 3 kΩ to GND, DIN = GNDmin 5 · typ 5.4 V6
Low-level output voltage VOLDOUT at RL = 3 kΩ to GND, DIN = VCCmin -5 · typ -5.4 V6
Output resistance roVCC, V+, and V– = 0 V, VO = ±2 Vmin 300 Ω6
Low-level output voltage VOLIOL = 1.6 mAmax 0.4 V6
Positive-going input threshold voltage VIT+VCC = 3.3 Vtyp 1.6 · max 2.4 V6
Positive-going input threshold voltage VIT+VCC = 5 Vtyp 1.9 · max 2.4 V6
Negative-going input threshold voltage VIT–VCC = 3.3 Vmin 0.6 · typ 1.1 V6
Negative-going input threshold voltage VIT–VCC = 5 Vmin 0.8 · typ 1.4 V6
Input hysteresis (VIT+ – VIT–) Vhystyp 0.5 V6
Input resistance riVI = ±3 V to ±25 Vmin 3 · typ 5 · max 7 kΩ6
Receiver input threshold for INVALID high-level output voltage VT+(valid)FORCEON = GND, FORCEOFF = VCCmax 2.7 V6
Receiver input threshold for INVALID high-level output voltage VT–(valid)FORCEON = GND, FORCEOFF = VCCmin -2.7 V6
Receiver input threshold for I NVALID low-level output voltage VT(invalid)FORCEON = GND, FORCEOFF = VCCmin -0.3 · max 0.3 V6
INVALID low-level output voltage VOLIOL = 1.6 mA, FORCEON = GND, FORCEOFF = VCCmax 0.4 V6
Maximum data rateCL = 1000 pF, RL = 3 kΩmin 150 · typ 250 kbit/s7
Pulse skew(2) tsk(p)CL = 150 pF to 2500 pF, RL = 3 kΩ to 7 kΩ, See 图 7-2typ 100 ns7
Slew rate, transition region (see 图 7-1) SR(tr)VCC = 3.3 V, RL = 3 kΩ to 7 kΩ; CL = 150 pF to 1000 pFmin 6 · max 30 V/us7
Slew rate, transition region (see 图 7-1) SR(tr)VCC = 3.3 V, RL = 3 kΩ to 7 kΩ; CL = 150 pF to 2500 pFmin 4 · max 30 V/us7
Propagation delay time, low- to high-level output tPLHCL = 150 pF, See 图 7-3typ 150 ns7
Propagation delay time, high- to low-level output tPHLCL = 150 pF, See 图 7-3typ 150 ns7
Output enable time tenCL = 150 pF, RL = 3 kΩ, See 图 7-4typ 200 ns7
Output disable time tdisCL = 150 pF, RL = 3 kΩ, See 图 7-4typ 200 ns7
Pulse skew(2) tsk(p)See 图 7-3typ 50 ns7
Propagation delay time, low- to high-level output tvalidtyp 1 us7
Propagation delay time, high- to low-level output tinvalidtyp 30 us7
Supply enable time tentyp 100 us7

Pins, by the datasheet

16
1 EN
Low input enables ROUT; high input sets ROUT to high impedance. · p. 3
2 C1+
Positive terminal of a voltage-doubler charge pump capacitor. · p. 3
3 V+
5.5-V supply generated by the charge pump. · p. 3
4 C1–
Negative terminal of a voltage-doubler charge pump capacitor. · p. 3
5 C2+
Positive terminal of a voltage-doubler charge pump capacitor. · p. 3
6 C2–
Negative terminal of a voltage-doubler charge pump capacitor. · p. 3
7 V–
–5.5-V supply generated by the charge pump. · p. 3
8 RIN
RS-232 receiver input. · p. 3
9 ROUT
Receiver output. · p. 3
10 INVALID
Invalid output pin; output low when RIN input is unpowered. · p. 3
11 DIN
Driver input. · p. 3
12 FORCEON
Automatic power-down control input. · p. 3
13 DOUT
RS-232 driver output. · p. 3
14 GND
Ground. · p. 3
15 VCC
3-V to 5.5-V supply voltage. · p. 3
16 FORCEOFF
Automatic power-down control input. · p. 3

Ordering codes, by the datasheet

7
MAX3221ECDBR
SSOP (DB), 16 pins · 0 to 70 °C; package quantity 2000; NIPDAU finish · p. 19
MAX3221ECDBRG4
SSOP (DB), 16 pins · 0 to 70 °C; package quantity 2000; NIPDAU finish · p. 19
MAX3221ECPWR
TSSOP (PW), 16 pins · 0 to 70 °C; package quantity 2000; NIPDAU finish · p. 19
MAX3221EIDBR
SSOP (DB), 16 pins · -40 to 85 °C; package quantity 2000; NIPDAU finish · p. 19
MAX3221EIDBRG4
SSOP (DB), 16 pins · -40 to 85 °C; package quantity 2000; NIPDAU finish · p. 19
MAX3221EIPWR
TSSOP (PW), 16 pins · -40 to 85 °C; package quantity 2000; NIPDAU or SN finish · p. 19
MAX3221EIPWRG4
TSSOP (PW), 16 pins · -40 to 85 °C; package quantity 2000; NIPDAU finish · p. 19

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MAX3221ECPW?

Yes. The symbol is Interface_UART:MAX3221 and the footprint Package_SO:TSSOP-16_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MAX3221ECPW?

TSSOP-16, with 16 pins. Its footprint is drawn on this page.

Where is the MAX3221ECPW datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the MAX3221ECPW?

JLCPCB lists it as part C350553, with 2,290 in stock; the sellers' links on this page open their listings.

What can replace the MAX3221ECPW?

Parts like it in the library: the SP3232EEY-L/TR by MaxLinear, the MAX3232IPW by Texas Instruments, the MAX3232EIPW by Texas Instruments and the MAX3232ECPW by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.