4 layers475.6 × 317.7 mm
OPSpec v0.0.2
lepton-7/Open-Plate-Spectrophotometer
An open-source project to build a 96-well spectrophotometer operating at 620nm. Designed from the ground-up focusing on robust electronic design.
153 partsGPL-3.0
LT1054IPE4
Texas InstrumentsExtended
- Part id
- ti/LT1054IPE4
- Category
- DC DC Converters
- Package
- PDIP-8
- Pins
- 5
- In stock
- 0 at JLCPCB (C20345545)
- Used on
- 1 open-source board
Overview
The LT1054IPE4 is a DC DC Converter made by Texas Instruments in a PDIP-8 package with 5 pins.
PCBKit's library has its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C20345545). 1 open-source board in 1 repository on GitHub use it.
Symbol
The library has no symbol for this part yet.
Footprint
Open-source boards using it
1Parts like it
8
MC34063ECN
DIP-80℃~+70℃@(TA) 1 1.25V~38V 1.5A 1.5mA 33kHz 3V~40V Adjustable Boost、Buck Buck、Boost Built-in No DIP-8 DC-DC Converters ROHSSTMicroelectronicsDC-DC ConvertersUC3845AN-TD
DIP-8DC-DC ConvertersTDSEMICDK125
DIP-8-25℃~+125℃ 4.5V~4.9V 61kHz~69kHz 70% 700V Flyback Isolation Over Voltage Protection、Under Voltage Protection、Over Current Protection、Short Circuit Protection、Soft Start、Over Temperature Protection Secondary-Side Feedback DIP-8 AC-DC Controllers and Regulators ROHSShenzhen DongKe SemiconDC-DC ConvertersMC34063EBN
DIP-8-40℃~+125℃@(TA) 1 1.5A 33kHz 3V~40V Adjustable Boost、Buck、Inverting Buck、Boost Built-in No DIP-8 DC-DC Converters ROHSSTMicroelectronicsDC-DC ConvertersLT1054CP
PDIP-8-5V 0℃~+70℃ 100mA 10Ω 2.5mA 25kHz 3.5V~15V Inverted Low-power standby、Adaptive switching frequency PDIP-8 Charge Pumps ROHSTexas InstrumentsDC-DC ConvertersEG1182
DIP-8-45℃~+85℃@(TA) 1 20V~60V 5mA 75kHz Adjustable Buck Buck Built-in No SOP-8-EP DC-DC Converters ROHSEG MicroDC-DC ConvertersICL7660N
DIP-83V~9.5V DIP-8 Charge Pumps ROHSHGSEMIDC-DC ConvertersMC34063N
DIP-80℃~+70℃ 1 1.5A 100Hz~100kHz 3V~40V Adjustable Boost、Buck、Inverting Buck-Boost Built-in No DIP-8 DC-DC Converters ROHSHGSEMIDC-DC Converters
Questions
Is there a KiCad symbol and footprint for the LT1054IPE4?
Yes. the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LT1054IPE4?
PDIP-8, with 5 pins. Its footprint is drawn on this page.
Where is the LT1054IPE4 datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the LT1054IPE4?
JLCPCB lists it as part C20345545, with 0 in stock; the sellers' links on this page open their listings.
What can replace the LT1054IPE4?
Parts like it in the library: the MC34063ECN by STMicroelectronics, the UC3845AN-TD by TDSEMIC, the DK125 by Shenzhen DongKe Semicon and the MC34063EBN by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the LT1054IPE4?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.