
Zipper
myriadrf/reference-development-kit
The Myriad-RF Reference Hardware design files and firmware
Texas Instruments
3.3V,150mA Ultra Low Noise, Linear Regulator for RF/Analog Circuits Requires No Bypass Capacitor
The LP5900SD-3.3 is an uncategorised made by Texas Instruments in a SON6 package with 7 pins. 3.3V,150mA Ultra Low Noise, Linear Regulator for RF/Analog Circuits Requires No Bypass Capacitor.
PCBKit's library has its KiCad symbol (Regulators:LP5900SD, from CERN's library) and its footprint (ICs And Semiconductors SMD:SON65P250X220X80-7N-R85X130, from CERN's library), ready for a KiCad board. 3 open-source boards in 2 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | VOUT | Power in |
| 2 | NC | Passive |
| 3 | GND | Power in |
| 4 | VEN | Input |
| 5 | NC | Passive |
| 6 | VIN | Input |
| 7 | GND | Power in |

myriadrf/reference-development-kit
The Myriad-RF Reference Hardware design files and firmware

myriadrf/reference-development-kit
The Myriad-RF Reference Hardware design files and firmware

myriadrf/STREAM
FPGA development platform for high-performance RF and digital design
Yes. The symbol is Regulators:LP5900SD and the footprint ICs And Semiconductors SMD:SON65P250X220X80-7N-R85X130, both drawn on this page. PCBKit places them on a board for you when you design with it.
SON6, with 7 pins. Its footprint is drawn on this page.
Parts like it in the library: the DAC121C081CISD by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.