2 layers76 × 126 mm
AllotmentSenderPCB
briandorey/pi-pico-lora-soil-monitor
Raspberry Pi Pico, LoRaWAN & Home Assistant remote soil monitoring
23 parts8MIT
LP3878-ADJDDA
Texas Instruments
- Part id
- ti/LP3878-ADJDDA
- Category
- Uncategorised
- Pins
- 7
- Used on
- 1 open-source board
Overview
The LP3878-ADJDDA is an uncategorised made by Texas Instruments with 7 pins.
PCBKit's library has its KiCad symbol (Celestial_Power_Linear_VReg:TI LP3878-ADJDDA, from Altium's library), ready for a KiCad board. 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
The library has no footprint for this part yet.
Pinout
7| Pin | Name | Type |
|---|---|---|
| 1 | BYP | Passive |
| 3 | GND | Passive |
| 4 | IN | Passive |
| 5 | OUT | Passive |
| 6 | ADJ | Passive |
| 8 | SD_N | Passive |
| 9 | DAP | Passive |
Open-source boards using it
1Questions
Is there a KiCad symbol and footprint for the LP3878-ADJDDA?
Yes. The symbol is Celestial_Power_Linear_VReg:TI LP3878-ADJDDA, both drawn on this page. PCBKit places them on a board for you when you design with it.
Which open-source boards use the LP3878-ADJDDA?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.