Skip to the content
12345678

LP2986AIMM-3.3

Texas Instruments

3.3V Micropower, 200mA Ultra Low-Dropout Fixed or Adjustable Voltage Regulator

Part id
ti/LP2986AIMM-3.3
Category
Uncategorised
Package
MSOP8
Pins
8

Overview

The LP2986AIMM-3.3 is an uncategorised made by Texas Instruments in a MSOP8 package with 8 pins. 3.3V Micropower, 200mA Ultra Low-Dropout Fixed or Adjustable Voltage Regulator.

PCBKit's library has its KiCad symbol (Regulators:LP2986, from CERN's library) and its footprint (Package_SO:MSOP-8_3x3mm_P0.65mm, from KiCad's library), ready for a KiCad board.

Symbol

2FB4IN8SHD1GND5OUT6SENS3TAP7ERR
Regulators:LP2986From CERN's library

Footprint

12345678
Package_SO:MSOP-8_3x3mm_P0.65mmFrom KiCad's library

Pinout

8
The pins of the LP2986AIMM-3.3
PinNameType
1GNDPower in
2FBInput
3TAPPassive
4INInput
5OUTPower in
6SENSPassive
7ERROutput
8SHDInput

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LP2986AIMM-3.3?

Yes. The symbol is Regulators:LP2986 and the footprint Package_SO:MSOP-8_3x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LP2986AIMM-3.3?

MSOP8, with 8 pins. Its footprint is drawn on this page.

What can replace the LP2986AIMM-3.3?

Parts like it in the library: the TPC112S1-VR by 3PEAK, the CS48505AM by Chipanalog, the CS48520AM by Chipanalog and the OB2269MM/TR-HG by HGSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.