Skip to the content

LP2981IBP-2.5

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 100mA 160uVrms 16V 2.5V 200mV@(100mA) 600uA 63dB@(1kHz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Reverse-polarity current protection Positive uSMD-5(0.9x1.1) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Part id
ti/LP2981IBP-2.5
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
uSMD-5(0.9x1.1)
Pins
5
In stock
0 at JLCPCB (C3749542)

Overview

The LP2981IBP-2.5 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a uSMD-5(0.9x1.1) package with 5 pins. -40℃~+125℃@(Tj) 1 100mA 160uVrms 16V 2.5V 200mV@(100mA) 600uA 63dB@(1kHz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Reverse-polarity current protection Positive uSMD-5(0.9x1.1) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_A1GND_A3EN_B2NC_C1OUT_C3IN, from PCBKit's generic symbols) and its footprint (EasyEDA_Cloud:BGA-5_L1.1-W1.0-P0.50-BL_TI_YPB0005, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C3749542).

Symbol

C3INA3ENC1OUTA1GND
Pinmap_Generic:Regulator_Linear_A1GND_A3EN_B2NC_C1OUT_C3INFrom PCBKit's generic symbols

Footprint

EasyEDA_Cloud:BGA-5_L1.1-W1.0-P0.50-BL_TI_YPB0005From EasyEDA

Pinout

5
The pins of the LP2981IBP-2.5
PinNameType
A1GNDPower in
A3ENInput
B2NCNot connected
C1OUTPower out
C3INPower in

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LP2981IBP-2.5?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_A1GND_A3EN_B2NC_C1OUT_C3IN and the footprint EasyEDA_Cloud:BGA-5_L1.1-W1.0-P0.50-BL_TI_YPB0005, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LP2981IBP-2.5?

uSMD-5(0.9x1.1), with 5 pins. Its footprint is drawn on this page.

Where is the LP2981IBP-2.5 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LP2981IBP-2.5?

JLCPCB lists it as part C3749542, with 0 in stock; the sellers' links on this page open their listings.

What can replace the LP2981IBP-2.5?

Parts like it in the library: the LP2981AIBP-2.5 by Texas Instruments, the LP2981AIBPX-2.5 by Texas Instruments, the LP2981IBPX-2.5 by Texas Instruments and the LP2985AIBP-2.5 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.