Skip to the content
PCBKitNew board
LP2980IBP-3.3, in 3D

LP2980IBP-3.3

Texas Instruments

-40℃~+125℃@(Tj) 1 150mV@(50mA) 160uVrms 16V 3.3V 50mA 63dB@(1kHz) 95uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control Positive USMD-5(0.9x1.1) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Extended
DatasheetJLCPCBLCSCti/LP2980IBP-3.3
Category
Voltage Regulators Linear, Low Drop Out (LDO) Regulators
Package
USMD-5(0.9x1.1)
Pins
5

Overview

The LP2980IBP-3.3 is a voltage Regulators Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a USMD-5(0.9x1.1) package with 5 pins. -40℃~+125℃@(Tj) 1 150mV@(50mA) 160uVrms 16V 3.3V 50mA 63dB@(1kHz) 95uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control Positive USMD-5(0.9x1.1) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_A1GND_A3EN_B2NC_C1OUT_C3IN, from PCBKit's generic symbols) and its footprint (EasyEDA_Cloud:BGA-5_L1.1-W1.0-P0.50-BL_TI_YPB0005, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C3752315).

Symbol

INC3ENA3OUTC1GNDA1
Pinmap_Generic:Regulator_Linear_A1GND_A3EN_B2NC_C1OUT_C3INFrom PCBKit's generic symbols

Footprint

EasyEDA_Cloud:BGA-5_L1.1-W1.0-P0.50-BL_TI_YPB0005From EasyEDA

Parameters

12
Features
Enable control；Thermal shutdown；Short Circuit Protection；Over Current Protection
Noise
160uVrms
Number of Outputs
1
Operating Temperature
-40℃~+125℃@(Tj)
Output Configuration
Positive
Output Current
50mA
Output Type
Fixed
Output Voltage
3.3V
Power Supply Rejection Ratio (PSRR)
63dB@(1kHz)
Voltage - Supply
16V
Voltage Dropout
150mV@(50mA)
standby current
95uA

Order codes

1

Pinout

5
The pins of the LP2980IBP-3.3
PinNameType
A1GNDPower in
A3ENInput
B2NCNot connected
C1OUTPower out
C3INPower in

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/LP2980IBP-3.3" title="LP2980IBP-3.3 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/LP2980IBP-3.3.jpg" alt="LP2980IBP-3.3" width="1200" height="900">
A picture that opens the part, for a README
[![LP2980IBP-3.3](https://pcbkit.io/embed/parts/ti/LP2980IBP-3.3.jpg?size=s)](https://pcbkit.io/parts/ti/LP2980IBP-3.3)

Questions

Is there a KiCad symbol and footprint for the LP2980IBP-3.3?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_A1GND_A3EN_B2NC_C1OUT_C3IN and the footprint EasyEDA_Cloud:BGA-5_L1.1-W1.0-P0.50-BL_TI_YPB0005, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LP2980IBP-3.3?

USMD-5(0.9x1.1), with 5 pins. Its footprint is drawn on this page.

Where is the LP2980IBP-3.3 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LP2980IBP-3.3?

JLCPCB lists it as part C3752315, with 0 in stock; the sellers' links on this page open their listings.

What can replace the LP2980IBP-3.3?

Parts like it in the library: the LP2981AIBPX-3.3 by Texas Instruments, the LP2980AITPX-3.3 by Texas Instruments, the AMS1117-3.3 by Advanced Monolithic Systems and the AMS1117-3.3 by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Parts like it

8