
Go2 pressure sensor
VincidaB/go2_pressure_sensor
An add-on pressure sensor module for the unitree GO2 for foot contact detection
Texas Instruments
The LP2980-ADJDBV is an uncategorised made by Texas Instruments with 5 pins.
PCBKit's library has its KiCad symbol (Regulator_Linear:LP2980-ADJ, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 3 open-source boards in 3 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | VIN | Power in |
| 2 | GND | Power in |
| 3 | ON/OFF | Input |
| 4 | ADJ | Input |
| 5 | VOUT | Power out |

VincidaB/go2_pressure_sensor
An add-on pressure sensor module for the unitree GO2 for foot contact detection

electricant/rudolph_led_driver
Driver for LED fairy lights using Li-Ion batteries

Yes. The symbol is Regulator_Linear:LP2980-ADJ and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.
Parts like it in the library: the TPAP2125K-3.3TRG1 by TECH PUBLIC, the 4A2D by TECH PUBLIC, the TPS7A0233DBV by Texas Instruments and the APX823-29W5G by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.
3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.