Skip to the content
1234567899

LMZ21700SILR

Texas InstrumentsExtended

-40℃~+125℃ 1 1.75mm 17uA 3.5mm 3.5mm 3V~17V 650mA 900mV~6V 95% Short Circuit Protection、Over-temperature protection、Over Current Protection、Under Voltage Protection、Programmable output voltage、Light load efficient mode、Power-on timing control、Programmable soft start Step-down type USIP-8 DC-DC Power Modules ROHS

Part id
ti/LMZ21700SILR
Category
DC DC Power Modules
Package
USIP-8
Pins
10
In stock
0 at JLCPCB (C181240)
Used on
1 open-source board

Overview

The LMZ21700SILR is a DC DC Power Module made by Texas Instruments in a USIP-8 package with 9 pins. -40℃~+125℃ 1 1.75mm 17uA 3.5mm 3.5mm 3V~17V 650mA 900mV~6V 95% Short Circuit Protection、Over-temperature protection、Over Current Protection、Under Voltage Protection、Programmable output voltage、Light load efficient mode、Power-on timing control、Programmable soft start Step-down type USIP-8 DC-DC Power Modules ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LMZ21700SILR, from EasyEDA) and its footprint (EasyEDA_Cloud:PWRM-SMD_LMZ21700SILR, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C181240). 1 open-source board in 1 repository on GitHub use it.

Symbol

1SS2FB3PG4VOUT5GND6VOS7EN8VIN9EPAD
EasyEDA_Cloud:LMZ21700SILRFrom EasyEDA

Footprint

1234567899
EasyEDA_Cloud:PWRM-SMD_LMZ21700SILRFrom EasyEDA

From the datasheet

13
Supply, least
3 V · VIN, recommended operating, min · p. 4
Supply, most
17 V · VIN, recommended operating, max · p. 4
Supply, absolute maximum
20 V · VIN, absolute maximum · p. 4
Junction, hottest
125 °C · junction temperature, absolute maximum · p. 4
Takes working
17 µA · VIN quiescent, EN high, IOUT = 0 mA, not switching, typical · p. 5
Takes asleep
1.5 µA · shutdown, EN low, TJ = -40 °C to 85 °C, typical · p. 5
Gives
650 mA · recommended continuous load current, max · p. 4
Current limit
950 mA · DC output, VOUT = 5.0 V, TA = 85 °C, typical · p. 5
A pin gives at most
10 mA · PG sink current, absolute maximum · p. 4
Feedback reference
803 mV · internal feedback reference, typical · p. 5
Junction to air (SIL0008E)
42.6 K/W · junction to ambient, four-layer board · p. 4
Junction to board (SIL0008E)
9.4 K/W · junction to board · p. 4
Junction to case (SIL0008E)
20.8 K/W · junction to case, top · p. 4

Open-source boards using it

1
  • 4 layers70 × 70 mmBlue interface board, the printed circuit board in 3D

    Blue interface board

    BetzDrive/interface-board

    Power and signal conditioning board for the Betz Drive system

    130 parts5

Questions

Is there a KiCad symbol and footprint for the LMZ21700SILR?

Yes. The symbol is EasyEDA_Cloud:LMZ21700SILR and the footprint EasyEDA_Cloud:PWRM-SMD_LMZ21700SILR, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LMZ21700SILR?

USIP-8, with 9 pins. Its footprint is drawn on this page.

Where is the LMZ21700SILR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LMZ21700SILR?

JLCPCB lists it as part C181240, with 0 in stock; the sellers' links on this page open their listings.

Which open-source boards use the LMZ21700SILR?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.