
LMV324AID
Texas InstrumentsExtended
-2.75V~-1.25V、1.25V~2.75V -40℃~+125℃ 1.7V/us 100dB 10pA 1MHz 1uV/℃ 2.5V~5.5V 30nV/√Hz@1kHz 3pA 4 40mA 4mV 70uA 9V ESD protection、EMI filtering/RF suppression Rail-to-rail output SOIC-14 Operational Amplifier ROHS
- Part id
- ti/LMV324AID
- Category
- Operational Amplifier
- Package
- SOIC-14
- Pins
- 14
- In stock
- 9,006 at JLCPCB (C484732)
- Used on
- 1 open-source board
Overview
The LMV324AID is an operational Amplifier made by Texas Instruments in a SOIC-14 package with 14 pins. -2.75V~-1.25V、1.25V~2.75V -40℃~+125℃ 1.7V/us 100dB 10pA 1MHz 1uV/℃ 2.5V~5.5V 30nV/√Hz@1kHz 3pA 4 40mA 4mV 70uA 9V ESD protection、EMI filtering/RF suppression Rail-to-rail output SOIC-14 Operational Amplifier ROHS.
PCBKit's library has its KiCad symbol (Amplifier_Operational:LMV324, from KiCad's library) and its footprint (Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, from KiCad's library), ready for a KiCad board. 9,006 are in stock at JLCPCB (part C484732). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
From the datasheet
10- Supply, least
- 2.5 V · V+ relative to V–, recommended operating min · p. 5
- Supply, most
- 5.5 V · V+ relative to V–, recommended operating max · p. 5
- Supply, absolute maximum
- 6 V · V+ relative to V–, absolute max · p. 5
- Works from
- -40 °C · TA, specified operating min · p. 5
- Works up to
- 125 °C · TA, specified operating max · p. 5
- Junction, hottest
- 150 °C · TJ, absolute max · p. 5
- Takes working
- 280 µA · sum of four amplifiers' typical quiescent currents, IO = 0 mA, VS = 5.5 V · p. 7
- Junction to air (D (SOIC))
- 102.1 K/W · junction-to-ambient thermal resistance · p. 6
- Junction to case (D (SOIC))
- 56.8 K/W · junction-to-case top thermal resistance · p. 6
- Junction to board (D (SOIC))
- 58.5 K/W · junction-to-board thermal resistance · p. 6
What it is and has
7- Output
- Rail-to-rail · p. 1
- Unity-gain bandwidth
- 1MHz · p. 1
- Input offset voltage
- ±1mV · p. 1
- Input bias current
- 10pA · p. 1
- Stability
- Unity-gain stable · p. 1
- Filter
- Internal RFI and EMI filter · p. 1
- Temperature range
- –40°C to 125°C · p. 1
Around it
1- cap 0.1 µF
- between V+ and V–; Bypass capacitors placed close to the power-supply pins. · p. 20
Specifications
49| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage, ([V+] – [V–]) | over operating temperature range | min 0 · max 6 V | 5 |
| Signal input pins Current | Input pins are diode-clamped to the power-supply rails | min -10 · max 10 mA | 5 |
| Operating TA | min -55 · max 150 °C | 5 | |
| Operating junction temperature TJ | max 150 °C | 5 | |
| Storage temperature Tstg | min -65 · max 150 °C | 5 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ±2000 V | min -2000 · max 2000 V | 5 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101; ±1000 V | min -1000 · max 1000 V | 5 |
| Supply voltage VS | over operating temperature range | min 2.5 · max 5.5 V | 5 |
| Specified temperature TA | min -40 · max 125 °C | 5 | |
| Junction-to-ambient thermal resistance RθJA | LMV324A, D (SOIC), 14 PINS | typ 102.1 °C/W | 6 |
| Junction-to-case (top) thermal resistance RθJC(top) | LMV324A, D (SOIC), 14 PINS | typ 56.8 °C/W | 6 |
| Junction-to-board thermal resistance RθJB | LMV324A, D (SOIC), 14 PINS | typ 58.5 °C/W | 6 |
| Junction-to-top characterization parameter ψJT | LMV324A, D (SOIC), 14 PINS | typ 20.5 °C/W | 6 |
| Junction-to-board characterization parameter ψJB | LMV324A, D (SOIC), 14 PINS | typ 58.1 °C/W | 6 |
| Input offset voltage VOS | Vs = 5 V; values printed as ± | typ 1 · max 4 mV | 7 |
| Input offset voltage VOS | Vs = 5 V, TA = –40°C to 125°C; maximum printed as ±5 | max 5 mV | 7 |
| VOS vs temperature dVOS/dT | TA = –40°C to 125°C; typical printed as ±1 | typ 1 uV/°C | 7 |
| Power-supply rejection ratio PSRR | VS = 2.5 to 5.5 V, VCM = (V–) | min 78 · typ 100 dB | 7 |
| Common-mode rejection ratio CMRR | VS = 2.5 V, (V–) – 0.1 V < VCM < (V+) – 1.4 V, TA = –40°C to 125°C | typ 86 dB | 7 |
| Common-mode rejection ratio CMRR | VS = 5.5 V, (V–) – 0.1 V < VCM < (V+) – 1.4 V, TA = –40°C to 125°C | typ 95 dB | 7 |
| Common-mode rejection ratio CMRR | VS = 5.5 V, (V–) – 0.1 V < VCM < (V+) + 0.1 V, TA = –40°C to 125°C | min 63 · typ 77 dB | 7 |
| Common-mode rejection ratio CMRR | VS = 2.5 V, (V–) – 0.1 V < VCM < (V+) + 0.1 V, TA = –40°C to 125°C | typ 68 dB | 7 |
| Input bias current IB | Vs = 5 V; typical printed as ±10 | typ 10 pA | 7 |
| Input offset current IOS | typical printed as ±3 | typ 3 pA | 7 |
| Input voltage noise (peak-to-peak) En | ƒ = 0.1 Hz to 10 Hz, Vs = 5 V | typ 5.1 uVPP | 7 |
| Input voltage noise density en | ƒ = 1 kHz, Vs = 5 V | typ 33 nV/√ Hz | 7 |
| Input voltage noise density en | ƒ = 10 kHz, Vs = 5 V | typ 30 nV/√ Hz | 7 |
| Input current noise density in | ƒ = 1 kHz, Vs = 5 V | typ 25 fA/√ Hz | 7 |
| Differential CID | Input capacitance | typ 1.5 pF | 7 |
| Common-mode CIC | Input capacitance | typ 5 pF | 7 |
| Open-loop voltage gain AOL | VS = 5.5 V, (V–) + 0.05 V < VO < (V+) – 0.05 V, RL = 10 kΩ | min 100 · typ 115 dB | 7 |
| Open-loop voltage gain AOL | VS = 2.5 V, (V–) + 0.04 V < VO < (V+) – 0.04 V, RL = 10 kΩ | typ 98 dB | 7 |
| Open-loop voltage gain AOL | VS = 2.5 V, (V–) + 0.1 V < VO < (V+) – 0.1 V, RL = 2 kΩ | typ 112 dB | 7 |
| Open-loop voltage gain AOL | VS = 5.5 V, (V–) + 0.15 V < VO < (V+) – 0.15 V, RL = 2 kΩ | typ 128 dB | 7 |
| Gain-bandwidth product GBW | Vs = 5 V | typ 1 MHz | 7 |
| Phase margin φm | VS = 5.5 V, G = 1 | typ 76 ° | 7 |
| Slew rate SR | Vs = 5 V | typ 1.7 V/us | 7 |
| Settling time tS | To 0.1%, VS = 5 V, 2-V step , G = +1, CL = 100 pF | typ 3 us | 7 |
| Settling time tS | To 0.01%, VS = 5 V, 2-V step , G = +1, CL = 100 pF | typ 4 us | 7 |
| Overload recovery time tOR | VS = 5 V, VIN × gain > VS | typ 0.9 us | 7 |
| Total harmonic distortion + noise THD+N | VS = 5.5 V, VCM = 2.5 V, VO = 1 VRMS, G = +1, f = 1 kHz, 80-kHz measurement BW | typ 0.005 % | 7 |
| Voltage output swing from supply rails VO | VS = 5.5 V, RL = 10 kΩ | typ 20 · max 50 mV | 7 |
| Voltage output swing from supply rails VO | VS = 5.5 V, RL = 2 kΩ | typ 40 · max 75 mV | 7 |
| Short-circuit current ISC | Vs = 5.5 V; typical printed as ±40 | typ 40 mA | 7 |
| Open-loop output impedance ZO | Vs = 5 V, f = 1 MHz | typ 1200 Ω | 7 |
| Specified voltage range VS | Single supply; equivalent split supply ±1.25 V to ±2.75 V | min 2.5 · max 5.5 V | 7 |
| Quiescent current per amplifier IQ | IO = 0 mA, VS = 5.5 V | typ 70 · max 125 uA | 7 |
| Quiescent current per amplifier IQ | IO = 0 mA, VS = 5.5 V, TA = –40°C to 125°C | max 150 uA | 7 |
| Power-on time | VS = 0 V to 5 V, to 90% IQ level | typ 50 us | 7 |
Open-source boards using it
1- 2 layers152.3 × 128.5 mm

Parts like it
8LM324D
SOIC-14-16V~16V 0℃~+70℃ 150nA 2mV 3V~32V 3mA 4 40mA 5nA 5uV/℃ 85dB Built-in compensation、ESD protection SOIC-14 Operational Amplifier ROHSonsemiOperational AmplifierLM2902DT
SOIC-14-15V~-1.5V、1.5V~15V -40℃~+125℃ 1.3MHz 1.5mA 10pA/℃ 20nA 2mV 2nA 30V 3V~30V 4 400V/ms 40nV/√Hz@1kHz 70dB 70mA 7uV/℃ SOIC-14 Operational Amplifier ROHSSTMicroelectronicsOperational AmplifierLM324DT
SOIC-14-15V~-1.5V、1.5V~15V 0℃~+70℃ 1.2mA 1.3MHz 20nA 300nA 30uV/℃ 3V~30V 4 400V/ms 40nV/√Hz@1kHz 5mV 70mA 80dB Built-in compensation SOIC-14 Operational Amplifier ROHSSTMicroelectronicsOperational AmplifierLMV324ID
SOIC-14-40℃~+125℃ 11nA 1MHz 1V/us 2.7V~5.5V 4 410uA 46nV/√Hz@1kHz 5nA 5uV/℃ 60mA 63dB 7mV Enable/shutdown function Rail-to-rail output SOIC-14 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLMV324-SR
SOP-14-1.05V~2.75V -40℃~+125℃ 1MHz 1pA 1pA 2.1V~5.5V 2.7uV/℃ 27nV/√Hz@1kHz 3.5mV 4 40uA 600V/ms 70dB 84mA Built-in compensation、EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOP-14 Operational Amplifier ROHSGainsilOperational AmplifierLM324
SOP-14-1.5V~10V 0℃~+70℃ 24V 250nA 3V~20V 4 40mA 50nA 700uA 7mV 80dB SOP-14 Operational Amplifier ROHSHXY MOSFETOperational AmplifierTLV9064ID
SOIC-14-40℃~+125℃ 0.05pA 0.5pA 1.8V~5.5V 103dB 10MHz 16nV/√Hz@1kHz 300uV 4 50mA 530nV/℃ 538uA 6.5V/us Enable/shutdown function、ESD protection、EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOIC-14 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierMC33179D
SOIC-14-18V~-2V、2V~18V -40℃~+85℃ 1.6mA 100nA 110dB 150uV 2V/us 2uV/℃ 4 5MHz 5nA 7.5nV/√Hz@1kHz 80mA ESD protection SOIC-14 Operational Amplifier ROHSonsemiOperational Amplifier
Questions
Is there a KiCad symbol and footprint for the LMV324AID?
Yes. The symbol is Amplifier_Operational:LMV324 and the footprint Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LMV324AID?
SOIC-14, with 14 pins. Its footprint is drawn on this page.
Where is the LMV324AID datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the LMV324AID?
JLCPCB lists it as part C484732, with 9,006 in stock; the sellers' links on this page open their listings.
What can replace the LMV324AID?
Parts like it in the library: the LM324D by onsemi, the LM2902DT by STMicroelectronics, the LM324DT by STMicroelectronics and the LMV324ID by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the LMV324AID?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.