LMV321AIDCK
Texas InstrumentsExtended
-2.75V~-1.25V、1.25V~2.75V -40℃~+125℃ 1 1.7V/us 100dB 10pA 1MHz 1uV/℃ 2.5V~5.5V 30nV/√Hz@1kHz 3pA 40mA 4mV 70uA 9V Rail-to-Rail Output SC-70-5 Operational Amplifier ROHS
- Part id
- ti/LMV321AIDCK
- Category
- Operational Amplifier
- Package
- SC-70-5
- Pins
- 5
- In stock
- 13,441 at JLCPCB (C484731)
Overview
The LMV321AIDCK is an operational Amplifier made by Texas Instruments in a SC-70-5 package with 5 pins. -2.75V~-1.25V、1.25V~2.75V -40℃~+125℃ 1 1.7V/us 100dB 10pA 1MHz 1uV/℃ 2.5V~5.5V 30nV/√Hz@1kHz 3pA 40mA 4mV 70uA 9V Rail-to-Rail Output SC-70-5 Operational Amplifier ROHS.
PCBKit's library has its KiCad symbol (Amplifier_Operational:LMV321, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-353_SC-70-5, from KiCad's library), ready for a KiCad board. 13,441 are in stock at JLCPCB (part C484731).
Symbol
Footprint
From the datasheet
12- Supply, least
- 2.5 V · V+ relative to V–, recommended operating min · p. 5
- Supply, most
- 5.5 V · V+ relative to V–, recommended operating max · p. 5
- Supply, absolute maximum
- 6 V · V+ relative to V–, absolute max · p. 5
- Works from
- -40 °C · TA, specified operating min · p. 5
- Works up to
- 125 °C · TA, specified operating max · p. 5
- Junction, hottest
- 150 °C · TJ, absolute max · p. 5
- Takes working
- 70 µA · Quiescent current typical, IO = 0 mA, VS = 5.5 V · p. 7
- Takes at most
- 150 µA · Quiescent current max, IO = 0 mA, VS = 5.5 V, TA = –40°C to 125°C · p. 7
- A pin gives at most
- 10 mA · Signal input pin current, absolute max magnitude · p. 5
- Junction to air (DCK (SC70))
- 239.6 K/W · Junction-to-ambient thermal resistance · p. 6
- Junction to case (DCK (SC70))
- 148.5 K/W · Junction-to-case (top) thermal resistance · p. 6
- Junction to board (DCK (SC70))
- 82.3 K/W · Junction-to-board thermal resistance · p. 6
What it is and has
9- Input offset voltage
- ±1mV · p. 1
- Output
- Rail-to-rail · p. 1
- Unity-gain bandwidth
- 1MHz · p. 1
- Broadband noise
- 30nV/√ Hz · p. 1
- Input bias current
- 10pA · p. 1
- Quiescent current
- 70µA/Ch · p. 1
- Stability
- Unity-gain stable · p. 1
- Filter
- Internal RFI and EMI filter · p. 1
- Package
- DCK (SC70, 5), 2mm × 2.1mm · p. 1
Around it
1- cap 0.1-µF
- between V+ and V–; Bypass capacitor; place close to the power-supply pins. · p. 20
Specifications
49| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage, ([V+] – [V–]) | Over operating temperature range | min 0 · max 6 V | 5 |
| Signal input pins Current(2) | Over operating temperature range | min -10 · max 10 mA | 5 |
| Operating, TA TA | min -55 · max 150 °C | 5 | |
| Operating junction temperature, TJ TJ | max 150 °C | 5 | |
| Storage temperature, Tstg Tstg | min -65 · max 150 °C | 5 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1); ± rating | max 2000 V | 5 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101(2); ± rating | max 1000 V | 5 |
| Supply voltage VS | Over operating temperature range | min 2.5 · max 5.5 V | 5 |
| Specified temperature TA | min -40 · max 125 °C | 5 | |
| Junction-to-ambient thermal resistance RθJA | LMV321A, DCK (SC70), 5 PINS | typ 239.6 °C/W | 6 |
| Junction-to-case (top) thermal resistance RθJC(top) | LMV321A, DCK (SC70), 5 PINS | typ 148.5 °C/W | 6 |
| Junction-to-board thermal resistance RθJB | LMV321A, DCK (SC70), 5 PINS | typ 82.3 °C/W | 6 |
| Junction-to-top characterization parameter ψJT | LMV321A, DCK (SC70), 5 PINS | typ 54.5 °C/W | 6 |
| Junction-to-board characterization parameter ψJB | LMV321A, DCK (SC70), 5 PINS | typ 81.8 °C/W | 6 |
| Input offset voltage VOS | Vs = 5 V; values are ± | typ 1 · max 4 mV | 7 |
| Input offset voltage VOS | Vs = 5 V, TA = –40°C to 125°C; maximum is ± | max 5 mV | 7 |
| VOS vs temperature dVOS/dT | TA = –40°C to 125°C; typical is ± | typ 1 uV/°C | 7 |
| Power-supply rejection ratio PSRR | VS = 2.5 to 5.5 V, VCM = (V–) | min 78 · typ 100 dB | 7 |
| Common-mode rejection ratio CMRR | VS = 2.5 V, (V–) – 0.1 V < VCM < (V+) – 1.4 V; TA = –40°C to 125°C | typ 86 dB | 7 |
| Common-mode rejection ratio CMRR | VS = 5.5 V, (V–) – 0.1 V < VCM < (V+) – 1.4 V; TA = –40°C to 125°C | typ 95 dB | 7 |
| Common-mode rejection ratio CMRR | VS = 5.5 V, (V–) – 0.1 V < VCM < (V+) + 0.1 V; TA = –40°C to 125°C | min 63 · typ 77 dB | 7 |
| Common-mode rejection ratio CMRR | VS = 2.5 V, (V–) – 0.1 V < VCM < (V+) + 0.1 V; TA = –40°C to 125°C | typ 68 dB | 7 |
| Input bias current IB | Vs = 5 V; typical is ± | typ 10 pA | 7 |
| Input offset current IOS | Typical is ± | typ 3 pA | 7 |
| Input voltage noise (peak-to-peak) En | ƒ = 0.1 Hz to 10 Hz, Vs = 5 V | typ 5.1 uVPP | 7 |
| Input voltage noise density en | ƒ = 1 kHz, Vs = 5 V | typ 33 nV/√ Hz | 7 |
| Input voltage noise density en | ƒ = 10 kHz, Vs = 5 V | typ 30 nV/√ Hz | 7 |
| Input current noise density in | ƒ = 1 kHz, Vs = 5 V | typ 25 fA/√ Hz | 7 |
| Differential CID | Input capacitance | typ 1.5 pF | 7 |
| Common-mode CIC | Input capacitance | typ 5 pF | 7 |
| Open-loop voltage gain AOL | VS = 5.5 V, (V–) + 0.05 V < VO < (V+) – 0.05 V, RL = 10 kΩ | min 100 · typ 115 dB | 7 |
| Open-loop voltage gain AOL | VS = 2.5 V, (V–) + 0.04 V < VO < (V+) – 0.04 V, RL = 10 kΩ | typ 98 dB | 7 |
| Open-loop voltage gain AOL | VS = 2.5 V, (V–) + 0.1 V < VO < (V+) – 0.1 V, RL = 2 kΩ | typ 112 dB | 7 |
| Open-loop voltage gain AOL | VS = 5.5 V, (V–) + 0.15 V < VO < (V+) – 0.15 V, RL = 2 kΩ | typ 128 dB | 7 |
| Gain-bandwidth product GBW | Vs = 5 V | typ 1 MHz | 7 |
| Phase margin φm | VS = 5.5 V, G = 1 | typ 76 ° | 7 |
| Slew rate SR | Vs = 5 V | typ 1.7 V/us | 7 |
| Settling time tS | To 0.1%, VS = 5 V, 2-V step , G = +1, CL = 100 pF | typ 3 us | 7 |
| Settling time tS | To 0.01%, VS = 5 V, 2-V step , G = +1, CL = 100 pF | typ 4 us | 7 |
| Overload recovery time tOR | VS = 5 V, VIN × gain > VS | typ 0.9 us | 7 |
| Total harmonic distortion + noise THD+N | VS = 5.5 V, VCM = 2.5 V, VO = 1 VRMS, G = +1, f = 1 kHz, 80-kHz measurement BW | typ 0.005 % | 7 |
| Voltage output swing from supply rails VO | VS = 5.5 V, RL = 10 kΩ | typ 20 · max 50 mV | 7 |
| Voltage output swing from supply rails VO | VS = 5.5 V, RL = 2 kΩ | typ 40 · max 75 mV | 7 |
| Short-circuit current ISC | Vs = 5.5 V; typical is ± | typ 40 mA | 7 |
| Open-loop output impedance ZO | Vs = 5 V, f = 1 MHz | typ 1200 Ω | 7 |
| Specified voltage range VS | Single supply; equivalent split supply ±1.25 V to ±2.75 V | min 2.5 · max 5.5 V | 7 |
| Quiescent current per amplifier IQ | IO = 0 mA, VS = 5.5 V | typ 70 · max 125 uA | 7 |
| Quiescent current per amplifier IQ | IO = 0 mA, VS = 5.5 V, TA = –40°C to 125°C | max 150 uA | 7 |
| Power-on time | VS = 0 V to 5 V, to 90% IQ level | typ 50 us | 7 |
Pins, by the datasheet
5- 1 +IN
- Noninverting input. · p. 3
- 2 V–
- Negative (lowest) supply or ground for single-supply operation. · p. 3
- 3 –IN
- Inverting input. · p. 3
- 4 OUT
- Output. · p. 3
- 5 V+
- Positive (highest) supply. · p. 3
Parts like it
8LMV321IDCKR
SC-70-5-40℃~+125℃ 1 1.7mV 11nA 130uA 1MHz 1V/us 2.7V~5.5V 46nV/√Hz@1kHz 5nA 5uV/℃ 60mA 63dB Rail-to-rail output SC-70-5 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierTLV9061IDCK
SC-70-5-40℃~+125℃ 0.05pA 0.5pA 1 1.6mV 1.8V~5.5V 103dB 10MHz 10nV/√Hz@10kHz 50mA 530nV/℃ 538uA 55V/us Enable/shutdown function、ESD protection、EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SC-70-5 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierTLV6741DCK
SC-70-5-40℃~+125℃ 1 10MHz 10pA 10pA 150uV 2.25V~5.5V 200nV/℃ 3.5nV/√Hz@1kHz 4.5V/us 890uA 95dB Enable/shutdown function、EMI filtering/RF suppression Rail-to-rail output SC-70-5 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierTLV9061QDCKRQ1
SC-70-5-40℃~+125℃ 0.5pA 1 1.8V~5.5V 103dB 10MHz 10nV/√Hz@1kHz 300uV 50mA 530nV/℃ 538uA 5pA 6.5V/us Enable/shutdown function、Built-in compensation、EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SC-70-5 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierOPA391DCK
SC-70-5-2.75V~-850mV、850mV~2.75V -40℃~+125℃ 0.8pA 1 1.7V~5.5V 121dB 1MHz 1V/us 1uV/℃ 24uA 45uV 5pA 60mA 60nV/√Hz@1kHz EMI filtering/RF suppression Rail-to-rail output SC-70-5 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierTLV9101IDCK
SC-70-5-1.35V~8V -40℃~+125℃ 1 1.1MHz 1.5mV 10pA 110dB 115uA 2.7V~16V 30nV/√Hz@1kHz 4.5V/us 5pA 600nV/℃ 80mA Enable/shutdown function、ESD protection、EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SC-70-5 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLMV321B-CR
SC-70-5-40℃~+125℃ 1 100mA 1MHz 1pA 2.5V~5.5V 25pA 2uV/℃ 35nV/√Hz@1kHz 4mV 700V/ms 80uA 85dB Rail-to-Rail Input, Rail-to-Rail Output SC-70-5 Operational Amplifier ROHS3PEAKOperational AmplifierLMV321IDCKR-MS
SC70-5-40℃~+85℃ 1 1.7mV 11nA 130uA 1MHz 1V/us 2.7V~5.5V 5nA 60mA 65dB 6V Rail-to-Rail Output SC70-5 Operational Amplifier ROHSMSKSEMIOperational Amplifier
Questions
Is there a KiCad symbol and footprint for the LMV321AIDCK?
Yes. The symbol is Amplifier_Operational:LMV321 and the footprint Package_TO_SOT_SMD:SOT-353_SC-70-5, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LMV321AIDCK?
SC-70-5, with 5 pins. Its footprint is drawn on this page.
Where is the LMV321AIDCK datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the LMV321AIDCK?
JLCPCB lists it as part C484731, with 13,441 in stock; the sellers' links on this page open their listings.
What can replace the LMV321AIDCK?
Parts like it in the library: the LMV321IDCKR by Texas Instruments, the TLV9061IDCK by Texas Instruments, the TLV6741DCK by Texas Instruments and the TLV9061QDCKRQ1 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.