
Pufferfish Controller-1
pez-globo/pufferfish-electronics
Circuit schematics and PCB layouts for the Pufferfish ventilator.
Texas InstrumentsExtended
-40℃~+85℃ 0.6uA 10kHz~100kHz 2.5V 2.7V~5.25V I2C Programmable gain、Built-in temperature sensor WSON-14-EP(4x4) Analog Front End (AFE) ROHS
The LMP91000SDE is an analog Front End made by Texas Instruments in a WSON-14-EP(4x4) package with 15 pins. -40℃~+85℃ 0.6uA 10kHz~100kHz 2.5V 2.7V~5.25V I2C Programmable gain、Built-in temperature sensor WSON-14-EP(4x4) Analog Front End (AFE) ROHS.
PCBKit's library has its KiCad symbol (tinkerforge:LMP91000, from Tinkerforge) and its footprint (EasyEDA_Cloud:WSON-14_L4.0-W4.0-P0.50-BL-EP, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C181364). 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | DGND | Passive |
| 2 | MENB | Passive |
| 3 | SCL | Passive |
| 4 | SDA | Passive |
| 5 | NC | Not connected |
| 6 | VDD | Passive |
| 7 | AGND | Passive |
| 8 | VOUT | Passive |
| 9 | C2 | Passive |
| 10 | C1 | Passive |
| 11 | VREF | Passive |
| 12 | WE | Passive |
| 13 | RE | Passive |
| 14 | CE | Passive |
| 15 | DAP | Passive |

pez-globo/pufferfish-electronics
Circuit schematics and PCB layouts for the Pufferfish ventilator.
Yes. The symbol is tinkerforge:LMP91000 and the footprint EasyEDA_Cloud:WSON-14_L4.0-W4.0-P0.50-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
WSON-14-EP(4x4), with 15 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C181364, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the LMP91000SD by Texas Instruments and the LMP91002SDX by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.