LMP90097MHX
Texas InstrumentsExtended
-40℃~+125℃ 2 2.6uA 2.7V~5.5V、2.85V~5.5V 24 893kHz、1.8MHz~7.2MHz Programmable gain、Multiplexers、Fault detection、Auto calibration SPI TSSOP-28-175mil Analog Front End (AFE) ROHS
- Part id
- ti/LMP90097MHX
- Category
- Analog Front End (AFE)
- Package
- TSSOP-28-175mil
- Pins
- 5
- In stock
- 3 at JLCPCB (C2651625)
Overview
The LMP90097MHX is an analog Front End made by Texas Instruments in a TSSOP-28-175mil package with 29 pins. -40℃~+125℃ 2 2.6uA 2.7V~5.5V、2.85V~5.5V 24 893kHz、1.8MHz~7.2MHz Programmable gain、Multiplexers、Fault detection、Auto calibration SPI TSSOP-28-175mil Analog Front End (AFE) ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LMP90097MHX_NOPB, from EasyEDA) and its footprint (EasyEDA_Cloud:HTSSOP-28_L9.7-W4.4-P0.65-LS6.4-TL-EP, from EasyEDA), ready for a KiCad board. 3 are in stock at JLCPCB (part C2651625).
Symbol
Footprint
Pinout
29| Pin | Name | Type |
|---|---|---|
| 1 | VA | Unspecified |
| 2 | VIN0 | Unspecified |
| 3 | VIN1 | Unspecified |
| 4 | VIN2 | Unspecified |
| 5 | VIN3 | Unspecified |
| 6 | VIN4 | Unspecified |
| 7 | VIN5 | Unspecified |
| 8 | VREFP1 | Unspecified |
| 9 | VREFN1 | Unspecified |
| 10 | VIN6/VREFP2 | Unspecified |
| 11 | VIN7/VREFN2 | Unspecified |
| 12 | IB2 | Unspecified |
| 13 | IB1 | Unspecified |
| 14 | XOUT | Unspecified |
| 15 | XIN/CLK | Unspecified |
| 16 | GND | Unspecified |
| 17 | CSB | Unspecified |
| 18 | SCLK | Unspecified |
| 19 | SDI | Unspecified |
| 20 | SDO/DRDYB | Unspecified |
| 21 | D0 | Unspecified |
| 22 | D1 | Unspecified |
| 23 | D2 | Unspecified |
| 24 | D3 | Unspecified |
| 25 | D4 | Unspecified |
| 26 | D5 | Unspecified |
| 27 | D6/DRDYB | Unspecified |
| 28 | VIO | Unspecified |
| 29 | EP | Unspecified |
Parts like it
3
LMP90080MHX
HTSSOP-28-40℃~+125℃ 0.893MHz、1.8MHz~7.2MHz 16 2.85V~5.5V 214.65Hz 214.65Hz 90dB Programmable gain、Multiplexers、Fault detection、Auto calibration SPI HTSSOP-28 Analog Front End (AFE) ROHSTexas InstrumentsAnalog Front End (AFE)
LMP90099MHX
TSSOP-28-175mil-40℃~+125℃ 2.6uA 2.7V~5.5V、2.85V~5.5V 893kHz、1.8MHz~7.2MHz Programmable gain、Multiplexers、Fault detection、Auto calibration SPI TSSOP-28-175mil Analog Front End (AFE) ROHSTexas InstrumentsAnalog Front End (AFE)LMP90099MH
TSSOP-28-175mil2.7V~5.5V、2.85V~5.5V TSSOP-28-175mil Analog Front End (AFE) ROHSTexas InstrumentsAnalog Front End (AFE)
Questions
Is there a KiCad symbol and footprint for the LMP90097MHX?
Yes. The symbol is EasyEDA_Cloud:LMP90097MHX_NOPB and the footprint EasyEDA_Cloud:HTSSOP-28_L9.7-W4.4-P0.65-LS6.4-TL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LMP90097MHX?
TSSOP-28-175mil, with 29 pins. Its footprint is drawn on this page.
Where is the LMP90097MHX datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the LMP90097MHX?
JLCPCB lists it as part C2651625, with 3 in stock; the sellers' links on this page open their listings.
What can replace the LMP90097MHX?
Parts like it in the library: the LMP90080MHX by Texas Instruments, the LMP90099MHX by Texas Instruments and the LMP90099MH by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.