LMP90080MHE
Texas InstrumentsExtended
2.7V~5.5V、2.85V~5.5V Programmable gain、Multiplexers、Fault detection、Auto calibration TSSOP-28-175mil Analog Front End (AFE) ROHS
- Part id
- ti/LMP90080MHE
- Category
- Analog Front End (AFE)
- Package
- TSSOP-28-175mil
- Pins
- 29
- In stock
- 10 at JLCPCB (C2879315)
Overview
The LMP90080MHE is an analog Front End made by Texas Instruments in a TSSOP-28-175mil package with 29 pins. 2.7V~5.5V、2.85V~5.5V Programmable gain、Multiplexers、Fault detection、Auto calibration TSSOP-28-175mil Analog Front End (AFE) ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LMP90097MHX_NOPB, from EasyEDA) and its footprint (EasyEDA_Cloud:HTSSOP-28_L9.7-W4.4-P0.65-LS6.4-BL-EP, from EasyEDA), ready for a KiCad board. 10 are in stock at JLCPCB (part C2879315).
Symbol
Footprint
Pinout
29| Pin | Name | Type |
|---|---|---|
| 1 | VA | Unspecified |
| 2 | VIN0 | Unspecified |
| 3 | VIN1 | Unspecified |
| 4 | VIN2 | Unspecified |
| 5 | VIN3 | Unspecified |
| 6 | VIN4 | Unspecified |
| 7 | VIN5 | Unspecified |
| 8 | VREFP1 | Unspecified |
| 9 | VREFN1 | Unspecified |
| 10 | VIN6/VREFP2 | Unspecified |
| 11 | VIN7/VREFN2 | Unspecified |
| 12 | IB2 | Unspecified |
| 13 | IB1 | Unspecified |
| 14 | XOUT | Unspecified |
| 15 | XIN/CLK | Unspecified |
| 16 | GND | Unspecified |
| 17 | CSB | Unspecified |
| 18 | SCLK | Unspecified |
| 19 | SDI | Unspecified |
| 20 | SDO/DRDYB | Unspecified |
| 21 | D0 | Unspecified |
| 22 | D1 | Unspecified |
| 23 | D2 | Unspecified |
| 24 | D3 | Unspecified |
| 25 | D4 | Unspecified |
| 26 | D5 | Unspecified |
| 27 | D6/DRDYB | Unspecified |
| 28 | VIO | Unspecified |
| 29 | EP | Unspecified |
Parts like it
3LMP90080MHX
HTSSOP-28-40℃~+125℃ 0.893MHz、1.8MHz~7.2MHz 16 2.85V~5.5V 214.65Hz 214.65Hz 90dB Programmable gain、Multiplexers、Fault detection、Auto calibration SPI HTSSOP-28 Analog Front End (AFE) ROHSTexas InstrumentsAnalog Front End (AFE)LMP90080QMH
HTSSOP-28-40℃~+150℃ 1 16 4.6uA 4.75V~5.5V 893kHz、1.8MHz~7.2MHz Programmable gain、Multiplexers、Input buffering、Fault detection、Auto calibration SPI HTSSOP-28 Analog Front End (AFE) ROHSTexas InstrumentsAnalog Front End (AFE)LMP90080QMHX
HTSSOP-28-40℃~+150℃ 1 16 2.7V~5.5V、2.85V~5.5V 4.6uA 893kHz、1.8MHz~7.2MHz、3.5717MHz、10MHz Programmable gain、Multiplexers、Fault detection、Auto calibration SPI HTSSOP-28 Analog Front End (AFE) ROHSTexas InstrumentsAnalog Front End (AFE)
Questions
Is there a KiCad symbol and footprint for the LMP90080MHE?
Yes. The symbol is EasyEDA_Cloud:LMP90097MHX_NOPB and the footprint EasyEDA_Cloud:HTSSOP-28_L9.7-W4.4-P0.65-LS6.4-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LMP90080MHE?
TSSOP-28-175mil, with 29 pins. Its footprint is drawn on this page.
Where is the LMP90080MHE datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the LMP90080MHE?
JLCPCB lists it as part C2879315, with 10 in stock; the sellers' links on this page open their listings.
What can replace the LMP90080MHE?
Parts like it in the library: the LMP90080MHX by Texas Instruments, the LMP90080QMH by Texas Instruments and the LMP90080QMHX by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.