LMK1C1104PW
Texas InstrumentsExtended
-40℃~+125℃ 1 1.71V、1.89V~3.135V、2.375V、2.625V、3.465V 250MHz 4 Multi-channel fan-out/isolation drive、Output enable/shutdown TSSOP-8 Clock Buffers, Drivers, Distributors ROHS
- Part id
- ti/LMK1C1104PW
- Category
- Clock Buffers, Drivers
- Package
- TSSOP-8
- Pins
- 8
- In stock
- 732 at JLCPCB (C1855734)
Overview
The LMK1C1104PW is a clock Buffers, Driver made by Texas Instruments in a TSSOP-8 package with 8 pins. -40℃~+125℃ 1 1.71V、1.89V~3.135V、2.375V、2.625V、3.465V 250MHz 4 Multi-channel fan-out/isolation drive、Output enable/shutdown TSSOP-8 Clock Buffers, Drivers, Distributors ROHS.
PCBKit's library has its KiCad symbol (Analog & Interface:LMK1C1104, from CERN's library) and its footprint (Package_SO:TSSOP-8_4.4x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. 732 are in stock at JLCPCB (part C1855734).
Symbol
Footprint
From the datasheet
18- Supply, least
- 3.135 V · VDD, recommended operating min, 3.3-V supply · p. 5
- Supply, most
- 3.465 V · VDD, recommended operating max, 3.3-V supply · p. 5
- Supply, least
- 2.375 V · VDD, recommended operating min, 2.5-V supply · p. 5
- Supply, most
- 2.625 V · VDD, recommended operating max, 2.5-V supply · p. 5
- Supply, least
- 1.71 V · VDD, recommended operating min, 1.8-V supply · p. 5
- Supply, most
- 1.89 V · VDD, recommended operating max, 1.8-V supply · p. 5
- Supply, absolute maximum
- 3.6 V · VDD, absolute max · p. 5
- Works from
- -40 °C · Operating free-air temperature min · p. 5
- Works up to
- 125 °C · Operating free-air temperature max · p. 5
- Junction, hottest
- 150 °C · Operating junction temperature max · p. 5
- Takes working
- 33 mA · VDD typical, 3.3 V, all outputs active, 100 MHz, CL = 5pF · p. 6
- Takes at most
- 40 mA · VDD max, 3.3 V, all outputs active, 100 MHz, CL = 5pF · p. 6
- Takes asleep
- 25 µA · VDD typical static current, all outputs disabled, fIN = 0 V · p. 6
- A pin gives at most
- 50 mA · Continuous output current absolute max, source or sink · p. 5
- Junction to air (PW (TSSOP))
- 181.9 K/W · Junction-to-ambient thermal resistance · p. 5
- Junction to case (PW (TSSOP))
- 76.6 K/W · Junction-to-case top thermal resistance · p. 5
- Junction to board (PW (TSSOP))
- 111.6 K/W · Junction-to-board thermal resistance · p. 5
- Edge
- 330 ps · Output rise and fall time typical, VDD = 2.5 V, CL = 5 pF, 156.25 MHz, 20/80% · p. 6
What it is and has
4- Clock buffer
- LVCMOS · p. 1
- Output enable
- Synchronous · p. 1
- Input protection
- Fail-safe inputs; inputs may be driven before VDD is applied · p. 10
- Package
- 8-pin TSSOP · p. 1
Around it
2- cap 0.1 µF
- between VDD and GND; One bypass capacitor per supply terminal; low ESR, very close to supply terminals, directly connected to ground plane with short loops. · p. 13
- ferrite Ferrite bead
- between Board Supply and Chip Supply; Recommended but optional; choose very low DC resistance to maintain adequate supply voltage. · p. 13
Specifications
58| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage VDD | Over operating free-air temperature range | min -0.5 · max 3.6 V | 5 |
| Input voltage (CLKIN) VCLKIN | Over operating free-air temperature range | min -0.5 · max 3.6 V | 5 |
| Input voltage (1G) VIN | Over operating free-air temperature range | min -0.5 · max 3.6 V | 5 |
| Output pins (Yn) VYn | Maximum: VDD + 0.3 V | min -0.5 V | 5 |
| Input current IIN | Over operating free-air temperature range | min -20 · max 20 mA | 5 |
| Continuous output current IO | Over operating free-air temperature range | min -50 · max 50 mA | 5 |
| Storage temperature Tstg | min -65 · max 150 °C | 5 | |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; value ±9000 V | max 9000 V | 5 |
| Electrostatic discharge V(ESD) | Charged device model (CDM), per JEDEC specification JESD22-C101, all pins; value ±1500 V | max 1500 V | 5 |
| Core supply voltage VDD | 3.3-V supply; typ field represents NOM | min 3.135 · typ 3.3 · max 3.465 V | 5 |
| Core supply voltage VDD | 2.5-V supply; typ field represents NOM | min 2.375 · typ 2.5 · max 2.625 V | 5 |
| Core supply voltage VDD | 1.8-V supply; typ field represents NOM | min 1.71 · typ 1.8 · max 1.89 V | 5 |
| Operating free-air temperature TA | min -40 · max 125 °C | 5 | |
| Operating junction temperature TJ | min -40 · max 150 °C | 5 | |
| Junction-to-ambient thermal resistance RqJA | LMK1C1104, PW (TSSOP), 8 PINS | typ 181.9 °C/W | 5 |
| Junction-to-case (top) thermal resistance RqJC(top) | LMK1C1104, PW (TSSOP), 8 PINS | typ 76.6 °C/W | 5 |
| Junction-to-board thermal resistance RqJB | LMK1C1104, PW (TSSOP), 8 PINS | typ 111.6 °C/W | 5 |
| Junction-to-top characterization parameter YJT | LMK1C1104, PW (TSSOP), 8 PINS | typ 16 °C/W | 5 |
| Junction-to-board characterization parameter YJB | LMK1C1104, PW (TSSOP), 8 PINS | typ 110.1 °C/W | 5 |
| Core supply current, static IDD | All-outputs disabled, fIN = 0 V; VDD = 3.3 V ± 5 %, –40°C ≤ TA ≤ 125°C; typical at 3.3 V, 25°C | typ 25 · max 45 uA | 6 |
| Core supply current IDD | All-outputs disabled, fIN = 100 MHz; VDD = 3.3 V ± 5 %, –40°C ≤ TA ≤ 125°C; typical at 3.3 V, 25°C | typ 8 · max 15 mA | 6 |
| Core supply current IDD | All-outputs active, fIN = 100 MHz, CL = 5pF, VDD = 1.8 V | typ 14 · max 20 mA | 6 |
| Core supply current IDD | All-outputs active, fIN = 100 MHz, CL = 5pF, VDD = 2.5 V | typ 21 · max 30 mA | 6 |
| Core supply current IDD | All-outputs active, fIN = 100 MHz, CL = 5pF, VDD = 3.3 V | typ 33 · max 40 mA | 6 |
| Input frequency fIN_SE | VDD = 3.3 V; minimum DC | max 250 MHz | 6 |
| Input frequency fIN_SE | VDD = 2.5 V and 1.8 V; minimum DC | max 200 MHz | 6 |
| Input slew rate dVIN/dt | 20% - 80% of input swing | min 0.1 V/ns | 6 |
| Input leakage current IIN_LEAK | CLOCK INPUT | min -50 · max 50 uA | 6 |
| Input capacitance CIN_SE | at 25°C | typ 7 pF | 6 |
| Output frequency fOUT | VDD = 3.3 V | max 250 MHz | 6 |
| Output frequency fOUT | VDD = 2.5 V and 1.8 V | max 200 MHz | 6 |
| Output duty cycle ODC | With 50% duty cycle input (for all VDD) | min 45 · max 55 % | 6 |
| Start-up time before output is active tSTART | See (1): measured from VDD stable to output active, when 1G = HIGH | max 3 ms | 6 |
| Output enable time t1G_ON | See (2): measured from 1G rising edge crossing VIH to first rising edge of Yn | max 5 cycles | 6 |
| Output disable time t1G_OFF | See (3): measured from 1G falling edge crossing VIL to last falling edge of Yn | max 5 cycles | 6 |
| Output high voltage VOH | VDD = 3.3 V ± 5%; IOH = 1 mA | min 2.8 V | 6 |
| Output low voltage VOL | VDD = 3.3 V ± 5%; IOL = 1 mA | max 0.2 V | 6 |
| Output rise and fall time tRISE-FALL | VDD = 3.3 V ± 5%; 20/80%, CL= 5 pF, fIN = 156.25 MHz | typ 0.35 · max 0.7 ns | 6 |
| Output-output skew tOUTPUT-SKEW | VDD = 3.3 V ± 5%; See (4) | typ 25 · max 50 ps | 6 |
| Part-to-part skew tPART-SKEW | VDD = 3.3 V ± 5% | max 250 ps | 6 |
| Propagation delay tPROP-DELAY | VDD = 3.3 V ± 5%; See (5) | typ 1.5 · max 2 ns | 6 |
| Additive Jitter tJITTER-ADD | VDD = 3.3 V ± 5%; fIN = 156.25 MHz, Input slew rate = 2 V/ns, Integration range = 12 kHz - 20 MHz | typ 8 · max 20 fs, RMS | 6 |
| Output impedance ROUT | VDD = 3.3 V ± 5% | typ 50 Ω | 6 |
| Output rise and fall time tRISE-FALL | VDD = 2.5 V ± 5%; 20/80%, CL= 5 pF, fIN = 156.25 MHz | typ 0.33 · max 0.8 ns | 6 |
| Output-output skew tOUTPUT-SKEW | VDD = 2.5 V ± 5%; See (4) | max 50 ps | 6 |
| Part-to-part skew tPART-SKEW | VDD = 2.5 V ± 5% | max 400 ps | 6 |
| Propagation delay tPROP-DELAY | VDD = 2.5 V ± 5%; See (5) | typ 1.5 · max 2.5 ns | 6 |
| Additive Jitter tJITTER-ADD | VDD = 2.5 V ± 5%; fIN = 156.25 MHz, Input slew rate = 2 V/ns, Integration range = 12 kHz - 20 MHz | typ 11 · max 27 fs, RMS | 6 |
| Output impedance ROUT | VDD = 2.5 V ± 5% | typ 52.5 Ω | 6 |
| Output rise and fall time tRISE-FALL | VDD = 1.8 V ± 5%; 20/80%, CL= 5 pF, fIN = 156.25 MHz | typ 0.38 · max 1 ns | 7 |
| Output-output skew tOUTPUT-SKEW | VDD = 1.8 V ± 5%; See (4) | max 50 ps | 7 |
| Part-to-part skew tPART-SKEW | VDD = 1.8 V ± 5% | max 900 ps | 7 |
| Propagation delay tPROP-DELAY | VDD = 1.8 V ± 5%; See (5) | typ 1.5 · max 3 ns | 7 |
| Additive Jitter tJITTER-ADD | VDD = 1.8 V ± 5%; fIN = 156.25 MHz, Input slew rate = 2 V/ns, Integration range = 12 kHz - 20 MHz | typ 17.5 · max 50 fs, RMS | 7 |
| Output impedance ROUT | VDD = 1.8 V ± 5% | typ 60 Ω | 7 |
| Input high-level current IIH | GENERAL PURPOSE INPUT (1G); VIH = VDD_REF | min -50 · max 50 uA | 7 |
| Input low-level current IIL | GENERAL PURPOSE INPUT (1G); VIL = GND | min -50 · max 50 uA | 7 |
| VDD ramp rate V/tRAMP | VDD = 3.3 V ± 5 %, –40°C ≤ TA ≤ 125°C | min 0.1 · max 50 V/ms | 7 |
Parts like it
8CDCS503PW
TSSOP-8-40℃~+85℃ 1 1 108MHz 3V~3.6V TSSOP-8 Clock Buffers, Drivers, Distributors ROHSTexas InstrumentsClock Buffers, DriversCDCS504TPWRQ1
TSSOP-8-40℃~+105℃ 1 1 108MHz 3V~3.6V TSSOP-8 Clock Buffers, Drivers, Distributors ROHSTexas InstrumentsClock Buffers, Drivers5PB1102PGGK
TSSOP-8-40℃~+85℃ 1 1.71V~3.465V 2 200MHz TSSOP-8 Clock Buffers, Drivers, Distributors ROHSRenesas ElectronicsClock Buffers, DriversCDCS503TPWRQ1
TSSOP-8-40℃~+105℃ 1 1 108MHz 3V~3.6V TSSOP-8 Clock Buffers, Drivers, Distributors ROHSTexas InstrumentsClock Buffers, Drivers5PB1104PGGI
TSSOP-8-40℃~+85℃ 1 1.8V~3.3V 200MHz 4 Multi-channel fan-out/isolation drive、Output enable/shutdown、Internal termination and bias network TSSOP-8 Clock Buffers, Drivers, Distributors ROHSRenesas ElectronicsClock Buffers, Drivers853S011BGILFT
TSSOP-8-3.0mm-40℃~+85℃ 1 2 2.375V~3.8V、2.375V~3.8V 2.5GHz Multi-channel fan-out/isolation drive、Internal termination and bias network TSSOP-8-3.0mm Clock Buffers, Drivers, Distributors ROHSRenesas ElectronicsClock Buffers, DriversNB3N2304NZDT
TSSOP-8-40℃~+85℃ 140MHz 3V~3.6V TSSOP-8 Clock Buffers, Drivers, Distributors ROHSonsemiClock Buffers, DriversCY2304NZZC-1
TSSOP-80℃~+70℃ 1 140MHz 3V~3.6V 4 TSSOP-8 Clock Buffers, Drivers, DistributorsInfineon TechnologiesClock Buffers, Drivers
Questions
Is there a KiCad symbol and footprint for the LMK1C1104PW?
Yes. The symbol is Analog & Interface:LMK1C1104 and the footprint Package_SO:TSSOP-8_4.4x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LMK1C1104PW?
TSSOP-8, with 8 pins. Its footprint is drawn on this page.
Where is the LMK1C1104PW datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the LMK1C1104PW?
JLCPCB lists it as part C1855734, with 732 in stock; the sellers' links on this page open their listings.
What can replace the LMK1C1104PW?
Parts like it in the library: the CDCS503PW by Texas Instruments, the CDCS504TPWRQ1 by Texas Instruments, the 5PB1102PGGK by Renesas Electronics and the CDCS503TPWRQ1 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.