Skip to the content
1234

LM7905CT

Texas InstrumentsExtended

0.5uVrms 0℃~+125℃@(Tj) 1 1.1V@(1A) 1.5A 1mA 25V 54dB@(120Hz) 5V Fixed Negative Over Current Protection、Short Circuit Protection、Thermal shutdown TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LM7905CT
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-220
Pins
4
In stock
3,246 at JLCPCB (C352863)
Used on
3 open-source boards

Overview

The LM7905CT is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a TO-220 package with 4 pins. 0.5uVrms 0℃~+125℃@(Tj) 1 1.1V@(1A) 1.5A 1mA 25V 54dB@(120Hz) 5V Fixed Negative Over Current Protection、Short Circuit Protection、Thermal shutdown TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulators:REG3+1 1GND-2IN-3OUT+4IN, from CERN's library) and its footprint (ICs And Semiconductors THD:TO-220-H, from CERN's library), ready for a KiCad board. 3,246 are in stock at JLCPCB (part C352863). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

GNDIN2IN4GND1OUT3
Regulators:REG3+1 1GND-2IN-3OUT+4INFrom CERN's library

Footprint

1234
ICs And Semiconductors THD:TO-220-HFrom CERN's library

From the datasheet

8
Supply, absolute maximum
25 V · Input Voltage, absolute maximum, VO = −5 V · p. 2
Junction, hottest
125 °C · Operating junction temperature, max · p. 2
Takes working
1 mA · Quiescent current, typical, TJ = 25°C, IOUT = 500 mA · p. 2
Gives
1.5 A · Rated output current · p. 1
Output
5 V · Fixed output voltage, typical, TJ = 25°C · p. 2
Dropout
1.1 V · Dropout voltage, typical, TJ = 25°C, IOUT = 1 A · p. 2
Junction to case (TO-220)
3 K/W · Junction-to-case thermal resistance, typical · p. 4
Junction to air (TO-220)
60 K/W · Junction-to-ambient thermal resistance, typical · p. 4

What it is and has

6
Output current
1.5 A · p. 1
Output voltage tolerance
4% · p. 1
Ripple rejection
High · p. 1
Package
TO-220 · p. 1
Protection
Thermal overload protection · p. 4
Protection
Internal short circuit protection · p. 4

Around it

2
cap 2.2μF
between input and ground; Input bypass; ceramic or solid tantalum. Mount with shortest leads, directly across regulator terminals if possible. · p. 4
cap 1.0μF
between output and ground; Output bypass for stability; ceramic or solid tantalum. Mount with shortest leads, directly across regulator terminals if possible. · p. 4

Specifications

21
ParameterConditionsAs printedPage
Input VoltageVo = −5Vmax -25 V2
Input-Output DifferentialVo = −5Vmax 25 V2
Operating Junction Temperature Rangemin 0 · max 125 °C2
Storage Temperature Rangemin -65 · max 150 °C2
Lead TemperatureSoldering, 10 sec.max 230 °C2
Output Voltage VOLM7905C; TJ = 25°C; VIN = −10V; IOUT = 500mA; CIN = 2.2uF; COUT = 1uF; Power Dissipation ≤ 1.5Wmin -4.8 · typ -5 · max -5.2 V2
Output Voltage VOLM7905C; 5mA ≤ IOUT ≤ 1A; P ≤ 15W; −20 ≤ VIN ≤ −7; 0°C ≤ TJ ≤ +125°C; CIN = 2.2uF; COUT = 1uFmin -4.75 · max -5.25 V2
Line Regulation ΔVOLM7905C; TJ = 25°C; −25 ≤ VIN ≤ −7; IOUT = 500mA; pulse testing at constant junction temperaturetyp 8 · max 50 mV2
Line Regulation ΔVOLM7905C; TJ = 25°C; −12 ≤ VIN ≤ −8; IOUT = 500mA; pulse testing at constant junction temperaturetyp 2 · max 15 mV2
Load Regulation ΔVOLM7905C; TJ = 25°C; 5mA ≤ IOUT ≤ 1.5A; VIN = −10V; pulse testing at constant junction temperaturetyp 15 · max 100 mV2
Load Regulation ΔVOLM7905C; TJ = 25°C; 250mA ≤ IOUT ≤ 750mA; VIN = −10V; pulse testing at constant junction temperaturetyp 5 · max 50 mV2
Quiescent Current IQLM7905C; TJ = 25°C; VIN = −10V; IOUT = 500mAtyp 1 · max 2 mA2
Quiescent Current Change ΔIQLM7905C; With Line; −25 ≤ VIN ≤ −7; IOUT = 500mA; 0°C ≤ TJ ≤ +125°Cmax 0.5 mA2
Quiescent Current Change ΔIQLM7905C; With Load, 5mA ≤ IOUT ≤ 1A; VIN = −10V; 0°C ≤ TJ ≤ +125°Cmax 0.5 mA2
Output Noise Voltage VnLM7905C; TA = 25°C; 10Hz ≤ f ≤ 100Hz; VIN = −10V; IOUT = 500mAtyp 125 uV2
Ripple RejectionLM7905C; f = 120Hz; −18 ≤ VIN ≤ −8; IOUT = 500mA; 0°C ≤ TJ ≤ +125°Cmin 54 · typ 66 dB2
Dropout VoltageLM7905C; TJ = 25°C; IOUT = 1Atyp 1.1 V2
Peak Output Current IOMAXLM7905C; TJ = 25°C; VIN = −10Vtyp 2.2 A2
Average Temperature Coefficient of Output VoltageLM7905C; IOUT = 5mA; 0 C ≤ TJ ≤ 100°C; VIN = −10Vtyp 0.4 mV/°C2
Junction-to-Case Thermal Resistance θJCTO-220typ 3 · max 5 °C/W4
Junction-to-Ambient Thermal Resistance θJATO-220typ 60 · max 40 °C/W4

Ordering codes, by the datasheet

2
LM7905CT/NOPB
TO-220 (NDE) · −5 V output; 3 pins; 45 per tube; RoHS; SN lead finish · p. 10
LM7905CT/NOPB.B
TO-220 (NDE) · −5 V output; 3 pins; 45 per tube; RoHS; SN lead finish · p. 10

Open-source boards using it

3
  • 2 layers116.8 × 154.9 mmIsa backplane, the printed circuit board in 3D

    Isa backplane

    skiselev/isa8_backplane

    ISA 8-bit Backplane

    61 parts132GPL-3.0
  • 2 layers50.8 × 50.8 mmSoldering, the printed circuit board in 3D

    Soldering

    willingc/Soldering

    41 parts
  • 2 layers421 × 60 mmMidirelais, the printed circuit board in 3D

    Midirelais

    mrwillem/PCBs

    113 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM7905CT?

Yes. The symbol is Regulators:REG3+1 1GND-2IN-3OUT+4IN and the footprint ICs And Semiconductors THD:TO-220-H, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM7905CT?

TO-220, with 4 pins. Its footprint is drawn on this page.

Where is the LM7905CT datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM7905CT?

JLCPCB lists it as part C352863, with 3,246 in stock; the sellers' links on this page open their listings.

What can replace the LM7905CT?

Parts like it in the library: the LM7905CT by HGSEMI, the L7805CDT-TR by STMicroelectronics, the L7805CV by STMicroelectronics and the CJ7805 3% by Jiangsu Changjing Electronics Technology (CJ). Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM7905CT?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.