LM78S40N
Texas InstrumentsExtended
-40℃~+125℃ PDIP-16 DC-DC Converters ROHS
- Part id
- ti/LM78S40N
- Category
- Supervisor And Reset ICs
- Package
- PDIP-16
- Pins
- 16
- In stock
- 0 at JLCPCB (C2864206)
Overview
The LM78S40N is a supervisor And Reset IC made by Texas Instruments in a PDIP-16 package with 16 pins. -40℃~+125℃ PDIP-16 DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LM78S40N_NOPB, from EasyEDA) and its footprint (Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2864206).
Symbol
Footprint
Pinout
16| Pin | Name | Type |
|---|---|---|
| 1 | K | Unspecified |
| 2 | A | Unspecified |
| 3 | SW_E | Unspecified |
| 4 | OP_OUT | Unspecified |
| 5 | OP_V+ | Unspecified |
| 6 | OP_+IN | Unspecified |
| 7 | OP_-IN | Unspecified |
| 8 | REF | Unspecified |
| 9 | COM_+IN | Unspecified |
| 10 | COM_-IN | Unspecified |
| 11 | GND | Unspecified |
| 12 | TIM_CAP | Unspecified |
| 13 | VIN | Unspecified |
| 14 | I_SEN | Unspecified |
| 15 | DRV_C | Unspecified |
| 16 | SW_C | Unspecified |
Parts like it
8KA3525A
DIP-160℃~+70℃ 5.1V 8V~35V DIP-16 DC-DC Converters ROHSMinosSupervisor And Reset ICsADM691ANZ
PDIP-16-40℃~+85℃ 1 200ms 4.65V 4.75V~5.5V 70uA Active Low Backup Battery Switching、RAM Write Protection No Open Drain、Push-pull Voltage Monitor Yes PDIP-16 Supervisor and Reset ICs ROHSAnalog DevicesSupervisor And Reset ICsADM691AANZ
PDIP-16-40℃~+85℃ 1 200ms 4.65V 4.75V~5.5V Active Low No Push-pull Voltage Monitor Yes PDIP-16 Supervisor and Reset ICs ROHSAnalog DevicesSupervisor And Reset ICsADM693AANZ
PDIP-16-40℃~+85℃@(TA) 1 200ms 4.4V 4.5V~5.5V Active Low No Open Drain、Push-pull Power Supervisor Yes PDIP-16 Supervisor and Reset ICs ROHSAnalog DevicesSupervisor And Reset ICsADM693ANZ
PDIP-16-40℃~+85℃@(Ta) 1 4.4V 4.5V~5.5V 50ms Active Low Open Drain Voltage Monitor Yes Yes PDIP-16 Supervisor and Reset ICs ROHSAnalog DevicesSupervisor And Reset ICsADM695ANZ
DIP-16-40℃~+85℃@(Ta) 1 200ms 4.65V 4.75V~5.5V Active Low Open Drain Voltage Monitor Yes Yes DIP-16 Supervisor and Reset ICs ROHSAnalog DevicesSupervisor And Reset ICsADM697ANZ
PDIP-16-40℃~+85℃@(TA) 1 1.3V 35ms Battery Backup Circuit Push-pull PDIP-16 Supervisor and Reset ICs ROHSAnalog DevicesSupervisor And Reset ICsADM800MAN
PDIP-16-40℃~+85℃@(TA) 1 200ms 4.5V~5.5V 4.65V Active Low No Open Drain Power Supervisor Yes PDIP-16 Supervisor and Reset ICsAnalog DevicesSupervisor And Reset ICs
Questions
Is there a KiCad symbol and footprint for the LM78S40N?
Yes. The symbol is EasyEDA_Cloud:LM78S40N_NOPB and the footprint Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LM78S40N?
PDIP-16, with 16 pins. Its footprint is drawn on this page.
Where is the LM78S40N datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the LM78S40N?
JLCPCB lists it as part C2864206, with 0 in stock; the sellers' links on this page open their listings.
What can replace the LM78S40N?
Parts like it in the library: the KA3525A by Minos, the ADM691ANZ by Analog Devices, the ADM691AANZ by Analog Devices and the ADM693AANZ by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.