LM65635RZTR
Texas InstrumentsExtended
WQFN-20(3.6x2.6) DC-DC Converters ROHS
- Part id
- ti/LM65635RZTR
- Category
- DC DC Converters
- Package
- WQFN-20(3.6x2.6)
- Pins
- 21
- In stock
- 1 at JLCPCB (C54529487)
Overview
The LM65635RZTR is a DC DC Converter made by Texas Instruments in a WQFN-20(3.6x2.6) package with 21 pins. WQFN-20(3.6x2.6) DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LM65635RZTR, from EasyEDA) and its footprint (EasyEDA_Cloud:WQFN-FCRLF-20_L3.6-W2.6-P0.50-TL, from EasyEDA), ready for a KiCad board. 1 are in stock at JLCPCB (part C54529487).
Symbol
Footprint
Pinout
21| Pin | Name | Type |
|---|---|---|
| 1 | NC | Unspecified |
| 2 | PG | Unspecified |
| 3 | FB | Unspecified |
| 4 | VCC | Unspecified |
| 5 | MODE/SYNC | Unspecified |
| 6 | RT | Unspecified |
| 7 | EN/UVLO | Unspecified |
| 8 | NC | Unspecified |
| 9 | PGND1 | Unspecified |
| 10 | NC | Unspecified |
| 11 | VIN1 | Unspecified |
| 12 | NC | Unspecified |
| 13 | SW1 | Unspecified |
| 14 | SW2 | Unspecified |
| 15 | BOOT | Unspecified |
| 16 | NC | Unspecified |
| 17 | VIN2 | Unspecified |
| 18 | NC | Unspecified |
| 19 | PGND2 | Unspecified |
| 20 | BIAS | Unspecified |
| 21 | GND | Unspecified |
Parts like it
4LM65645RZTR
WQFN-FCRLF-20(2.5x3.5)-40℃~+150℃@(TJ) 1 2.5uA 3.3V、5V 300kHz~2.2MHz 3V~65V 4.5A Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Operating status indication、Cycle-by-cycle current limiting、Frequency synchronization、Hiccup current limiting、Built-in LDO regulator、EMI optimization (spread spectrum) Step-down type Yes WQFN-FCRLF-20(2.5x3.5) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersPLM65645SRZTRQ1
WQFN-FCRLF-20(2.6x3.6)-40℃~+150℃@(TJ) 2.5uA 300kHz~2.2MHz 3V~65V 4.5A Adjustable Buck Buck Yes WQFN-FCRLF-20(2.6x3.6) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLM65625SRZTRQ1
WQFN-20(2.6x3.6)WQFN-20(2.6x3.6) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLM65635SRZTRQ1
WQFN-20(3.6x2.6)-40℃~+150℃ 1 2.1uA 3.5A 300kHz~2.2MHz 3V~65V Adjustable and Fixed Buck Built-in Overcurrent Protection、Operating status indication、Frequency synchronization、Hiccup current limiting、Built-in LDO regulator、EMI optimization (spread spectrum) Step-down type Yes WQFN-20(3.6x2.6) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
Questions
Is there a KiCad symbol and footprint for the LM65635RZTR?
Yes. The symbol is EasyEDA_Cloud:LM65635RZTR and the footprint EasyEDA_Cloud:WQFN-FCRLF-20_L3.6-W2.6-P0.50-TL, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LM65635RZTR?
WQFN-20(3.6x2.6), with 21 pins. Its footprint is drawn on this page.
Where can I order the LM65635RZTR?
JLCPCB lists it as part C54529487, with 1 in stock; the sellers' links on this page open their listings.
What can replace the LM65635RZTR?
Parts like it in the library: the LM65645RZTR by Texas Instruments, the PLM65645SRZTRQ1 by Texas Instruments, the LM65625SRZTRQ1 by Texas Instruments and the LM65635SRZTRQ1 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.