LM621N
Texas InstrumentsExtended
-40℃~+85℃ 4.5V~5.5V Three Phase PDIP-18 Brushless DC (BLDC) Motor Driver
- Part id
- ti/LM621N
- Category
- Brushless DC (BLDC) Motor Driver
- Package
- PDIP-18
- Pins
- 18
- In stock
- 0 at JLCPCB (C3681448)
Overview
The LM621N is a brushless DC (BLDC) Motor Driver made by Texas Instruments in a PDIP-18 package with 18 pins. -40℃~+85℃ 4.5V~5.5V Three Phase PDIP-18 Brushless DC (BLDC) Motor Driver.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LM621N, from EasyEDA) and its footprint (Package_DIP:DIP-18_W7.62mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C3681448).
Symbol
Footprint
Pinout
18| Pin | Name | Type |
|---|---|---|
| 1 | +5V | Unspecified |
| 2 | DIRECTION | Unspecified |
| 3 | DEAD-TIMEE_ENABLE | Unspecified |
| 4 | CLOCK_TIMING | Unspecified |
| 5 | HS1 | Unspecified |
| 6 | HS2 | Unspecified |
| 7 | HS3 | Unspecified |
| 8 | 30/60#_SELECT | Unspecified |
| 9 | LOGIC_GROUND | Unspecified |
| 10 | POWER_GROUND | Unspecified |
| 11 | CURREENT_SOURCE_OUT#3 | Unspecified |
| 12 | CURREENT_SOURCE_OUT#2 | Unspecified |
| 13 | CURREENT_SOURCE_OUT#1 | Unspecified |
| 14 | CURREENT_SINK_OUT#3 | Unspecified |
| 15 | CURREENT_SINK_OUT#2 | Unspecified |
| 16 | CURREENT_SINK_OUT#1 | Unspecified |
| 17 | OUTPUT_INHIBIT | Unspecified |
| 18 | 5-40_MOTOR_SUPPLY_VOLTAGE | Unspecified |
Questions
Is there a KiCad symbol and footprint for the LM621N?
Yes. The symbol is EasyEDA_Cloud:LM621N and the footprint Package_DIP:DIP-18_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LM621N?
PDIP-18, with 18 pins. Its footprint is drawn on this page.
Where is the LM621N datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the LM621N?
JLCPCB lists it as part C3681448, with 0 in stock; the sellers' links on this page open their listings.