4 layers100 × 50 mm
Design3
nyxrobotics/newer-motor-controllers
STM32f407 riser PCB actually stm32f405, allows an STM32 running VESC firmware to be attached to the same pin layout as Ti instaspin launchpads.
129 parts
LM5161
Texas Instruments
ti/LM5161
- Category
- Uncategorised
- Pins
- 13
Overview
The LM5161 is an uncategorised made by Texas Instruments with 13 pins.
PCBKit's library has its KiCad symbol (Celestial_Power_Switchmode:TI LM5161, from Altium's library), ready for a KiCad board. 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
The library has no footprint for this part yet.
Pinout
13| Pin | Name | Type |
|---|---|---|
| 1 | AGND | Passive |
| 2 | PGND | Passive |
| 3 | VIN | Passive |
| 4 | EN/UVLO | Passive |
| 5 | RON | Passive |
| 6 | SS | Passive |
| 8 | FPWM | Passive |
| 9 | FB | Passive |
| 10 | VCC | Passive |
| 11 | BST | Passive |
| 12 | SW | Passive |
| 13 | SW | Passive |
| 15 | AGND | Passive |
Open-source boards using it
All 1Questions
Is there a KiCad symbol and footprint for the LM5161?
Yes. The symbol is Celestial_Power_Switchmode:TI LM5161, both drawn on this page. PCBKit places them on a board for you when you design with it.
Which open-source boards use the LM5161?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.