LM5148RGY
Texas InstrumentsExtended
-40℃~+125℃ 1 2.2MHz 3.5V~80V 800mV~55V 9.5uA Adjustable Buck Buck External Yes VQFN-24(5.5x3.5) DC-DC Converters ROHS
- Part id
- ti/LM5148RGY
- Category
- DC DC Converters
- Package
- VQFN-24(5.5x3.5)
- Pins
- 25
- In stock
- 51,952 at JLCPCB (C7470701)
Overview
The LM5148RGY is a DC DC Converter made by Texas Instruments in a VQFN-24(5.5x3.5) package with 25 pins. -40℃~+125℃ 1 2.2MHz 3.5V~80V 800mV~55V 9.5uA Adjustable Buck Buck External Yes VQFN-24(5.5x3.5) DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (Celestial_Power_Switchmode:TI LM5148, from Altium's library) and its footprint (EasyEDA_Cloud:VQFN-24_L5.5-W3.5-P0.50-BL-EP-2, from EasyEDA), ready for a KiCad board. 51,952 are in stock at JLCPCB (part C7470701).
Symbol
Footprint
From the datasheet
15- Supply, least
- 3.5 V · VIN, recommended operating, min · p. 5
- Supply, most
- 80 V · VIN, recommended operating, max · p. 5
- Supply, absolute maximum
- 85 V · VIN to PGND, absolute maximum · p. 5
- Junction, hottest
- 150 °C · operating junction temperature, max · p. 5
- Takes asleep
- 2.3 µA · VIN shutdown current, VEN = 0 V, typical · p. 6
- Takes asleep
- 124 µA · VIN standby current, non-switching, 0.5 V ≤ VEN ≤ 1 V, typical · p. 6
- Takes asleep
- 9.5 µA · 3.3-V output, in regulation, no load, not switching, typical · p. 6
- Takes asleep
- 9.9 µA · 5-V output, in regulation, no load, not switching, typical · p. 6
- Feedback reference
- 800 mV · regulated FB voltage, typical · p. 6
- Switches at
- 220 kHz · RRT = 97.6 kΩ to AGND, typical · p. 7
- Switches at
- 2.2 MHz · VIN = 12 V, RRT = 9.52 kΩ to AGND, typical · p. 7
- Switches at
- 100 kHz · RRT = 220 kΩ to AGND, typical · p. 7
- Junction to air (RGY (VQFN))
- 37.3 K/W · junction-to-ambient thermal resistance · p. 6
- Junction to board (RGY (VQFN))
- 15.5 K/W · junction-to-board thermal resistance · p. 6
- Junction to case (RGY (VQFN))
- 32 K/W · junction-to-case top thermal resistance · p. 6
Parts like it
4LM5149RGY
VQFN-24(3.5x5.5)-40℃~+150℃@(TJ) 1 100kHz~2.2MHz 3.5V~80V 800mV~55V 9.5uA Adjustable Buck External Overcurrent Protection、Light load efficient mode、Operating status indication、Cycle-by-cycle current limiting、Frequency synchronization、Hiccup current limiting、External compensation、Built-in LDO regulator、EMI optimization (spread spectrum) Step-down type Yes VQFN-24(3.5x5.5) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLM25149RGY
VQFN-24(5.5x3.5)-40℃~+150℃@(TJ) 1 2.2MHz 3.5V~42V 800mV~36V 9.5uA Adjustable Buck Buck External Yes VQFN-24(5.5x3.5) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLM25148QRGYRQ1
VQFN-24(3.5x5.5)-40℃~+150℃@(TJ) 100kHz~2.2MHz 3.5V~42V Buck Buck External Yes VQFN-24(3.5x5.5) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS54122RHLT
VQFN-24-EP(3.5x5.5)-40℃~+125℃ 2 2MHz Buck Built-in VQFN-24-EP(3.5x5.5) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
Questions
Is there a KiCad symbol and footprint for the LM5148RGY?
Yes. The symbol is Celestial_Power_Switchmode:TI LM5148 and the footprint EasyEDA_Cloud:VQFN-24_L5.5-W3.5-P0.50-BL-EP-2, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LM5148RGY?
VQFN-24(5.5x3.5), with 25 pins. Its footprint is drawn on this page.
Where is the LM5148RGY datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the LM5148RGY?
JLCPCB lists it as part C7470701, with 51,952 in stock; the sellers' links on this page open their listings.
What can replace the LM5148RGY?
Parts like it in the library: the LM5149RGY by Texas Instruments, the LM25149RGY by Texas Instruments, the LM25148QRGYRQ1 by Texas Instruments and the TPS54122RHLT by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.