Skip to the content
21

LM5146RGY

Texas InstrumentsExtended

-40℃~+150℃@(TJ) 1 1.8mA 1MHz 5.5V~100V 800mV~60V Adjustable Buck External Overcurrent Protection、Light load efficient mode、Adjustable soft-start、Operating status indication、Cycle-by-cycle current limiting、Adjustable current limiting、Frequency synchronization、Hiccup current limiting、Built-in LDO regulator、EMI optimization (spread spectrum) Step-down type Yes VQFN-20(3.5x4.5) DC-DC Converters ROHS

Part id
ti/LM5146RGY
Category
DC DC Converters
Package
VQFN-20(3.5x4.5)
Pins
21
In stock
0 at JLCPCB (C3188679)
Used on
1 open-source board

Overview

The LM5146RGY is a DC DC Converter made by Texas Instruments in a VQFN-20(3.5x4.5) package with 21 pins. -40℃~+150℃@(TJ) 1 1.8mA 1MHz 5.5V~100V 800mV~60V Adjustable Buck External Overcurrent Protection、Light load efficient mode、Adjustable soft-start、Operating status indication、Cycle-by-cycle current limiting、Adjustable current limiting、Frequency synchronization、Hiccup current limiting、Built-in LDO regulator、EMI optimization (spread spectrum) Step-down type Yes VQFN-20(3.5x4.5) DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:L3751PUR, from EasyEDA) and its footprint (EasyEDA_Cloud:VQFN-20_L4.5-W3.5-P0.50-BL-EP, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C3188679). 1 open-source board in 1 repository on GitHub use it.

Symbol

1EN/UVLO2RT3SS/TRK4COMP5FB6AGND7SYNCOUT8SYNCIN9NC10PGOOD11ILIM12PGND13LO14VCC15EP16NC17BST18HO19SW20VIN21EP
EasyEDA_Cloud:L3751PURFrom EasyEDA

Footprint

21
EasyEDA_Cloud:VQFN-20_L4.5-W3.5-P0.50-BL-EPFrom EasyEDA

From the datasheet

20
Supply, least
5.5 V · VIN, recommended operating, min · p. 7
Supply, most
100 V · VIN, recommended operating, max · p. 7
Supply, least
8 V · VCC, external bias rail, recommended operating, min · p. 7
Supply, most
13 V · VCC, external bias rail, recommended operating, max · p. 7
Supply, absolute maximum
100 V · VIN, absolute maximum · p. 6
Supply, absolute maximum
14 V · VCC, absolute maximum · p. 6
Junction, hottest
150 °C · operating junction temperature, max · p. 6
Takes working
1.8 mA · VIN quiescent current, enabled, not switching, typical · p. 8
Takes asleep
1.75 mA · VIN standby current, EN/UVLO = 1 V, typical · p. 8
Takes asleep
13.5 µA · VIN shutdown current, EN/UVLO = 0 V, VCC < 1 V, typical · p. 8
A pin gives at most
1 mA · SYNCOUT sink or source current, recommended max magnitude · p. 7
A pin gives at most
2 mA · PGOOD sink current, recommended max · p. 7
Feedback reference
800 mV · FB reference, FB connected to COMP, typical · p. 8
Switches at
100 kHz · RT = 100 kΩ, typical · p. 9
Switches at
400 kHz · RT = 25 kΩ, typical · p. 9
Switches at
780 kHz · RT = 12.5 kΩ, typical · p. 9
Edge
4 ns · HO and LO fall time, BST − SW = 7 V, load = 1 nF, typical · p. 10
Junction to air (RGY (VQFN))
36.8 K/W · junction-to-ambient thermal resistance · p. 7
Junction to board (RGY (VQFN))
11.8 K/W · junction-to-board thermal resistance · p. 7
Junction to case (RGY (VQFN))
28 K/W · junction-to-case top thermal resistance · p. 7

Open-source boards using it

1
  • 4 layers58.4 × 28.8 mmSSDV3, the printed circuit board in 3D

    SSDV3

    jnjoaquin/SSDV3

    A 12S battery eliminator circuit for UAS applications. Please see the UBCO Aerospace fork for the latest release.

    69 partsCERN-OHL-W-2.0

Parts like it

3

Questions

Is there a KiCad symbol and footprint for the LM5146RGY?

Yes. The symbol is EasyEDA_Cloud:L3751PUR and the footprint EasyEDA_Cloud:VQFN-20_L4.5-W3.5-P0.50-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM5146RGY?

VQFN-20(3.5x4.5), with 21 pins. Its footprint is drawn on this page.

Where is the LM5146RGY datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM5146RGY?

JLCPCB lists it as part C3188679, with 0 in stock; the sellers' links on this page open their listings.

What can replace the LM5146RGY?

Parts like it in the library: the LM5146QRGYTQ1 by Texas Instruments, the LM5145RGY by Texas Instruments and the LM5145QRGYRQ1 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM5146RGY?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.