LM3881MME
Texas InstrumentsExtended
-40℃~+125℃@(Tj) No No Open Drain VSSOP-8-0.65mm Supervisor and Reset ICs ROHS
- Part id
- ti/LM3881MME
- Category
- Monitors & Reset Circuits
- Package
- VSSOP-8-0.65mm
- Pins
- 8
- In stock
- 0 at JLCPCB (C701875)
Overview
The LM3881MME is a monitors & Reset Circuit made by Texas Instruments in a VSSOP-8-0.65mm package with 8 pins. -40℃~+125℃@(Tj) No No Open Drain VSSOP-8-0.65mm Supervisor and Reset ICs ROHS.
PCBKit's library has its KiCad symbol (LM3881:LM3881, from Antmicro) and its footprint (Package_SO:VSSOP-8_3x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C701875).
Symbol
Footprint
From the datasheet
10- Supply, least
- 2.7 V · VCC, recommended operating min · p. 4
- Supply, most
- 5.5 V · VCC, recommended operating max · p. 4
- Supply, absolute maximum
- 6 V · VCC to GND, absolute max · p. 4
- Works from
- -40 °C · Operating temperature min, LM3881MME/NOPB · p. 21
- Works up to
- 125 °C · Operating temperature max, LM3881MME/NOPB · p. 21
- Junction, hottest
- 150 °C · Junction temperature absolute max · p. 4
- Takes working
- 80 µA · VCC operating quiescent current typical, VCC = 3.3 V · p. 5
- Junction to air (DGK)
- 224.5 K/W · Junction-to-ambient thermal resistance · p. 4
- Junction to case (DGK)
- 107.6 K/W · Junction-to-case (top) thermal resistance · p. 4
- Junction to board (DGK)
- 145.3 K/W · Junction-to-board thermal resistance · p. 4
What it is and has
4- Sequencing
- Power-up and power-down control · p. 1
- Output logic
- Invert feature · p. 1
- Output flags
- 3 open-drain outputs · p. 1
- Package
- VSSOP (8), 3.00 mm x 3.00 mm · p. 1
Around it
1- res 100-kΩ
- between FLAG1 and Flag Supply; Pullup for open-drain output; a separate flag supply may be used within recommended operating conditions. · p. 15
Specifications
25| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| VCC, EN, INV, TADJ, FLAG1, FLAG2, FLAG3 to GND | Over operating free-air temperature | min -0.3 · max 6 V | 4 |
| Junction Temperature | max 150 °C | 4 | |
| Lead Temperature (Soldering, 5 s) | Soldering, 5 s | max 260 °C | 4 |
| Storage temperature range Tstg | min -65 · max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins | max 2 kV | 4 |
| VCC to GND | Over operating free-air temperature range | min 2.7 · max 5.5 V | 4 |
| EN, INV, TADJ, FLAG1, FLAG2, FLAG3 to GND | Over operating free-air temperature range | min -0.3 V | 4 |
| Junction Temperature | min -40 · max 125 °C | 4 | |
| Junction-to-ambient thermal resistance RθJA | LM3881, DGK, 8 PINS | typ 224.5 °C/W | 4 |
| Junction-to-case (top) thermal resistance RθJC(top) | LM3881, DGK, 8 PINS | typ 107.6 °C/W | 4 |
| Junction-to-board thermal resistance RθJB | LM3881, DGK, 8 PINS | typ 145.3 °C/W | 4 |
| Junction-to-top characterization parameter ψJT | LM3881, DGK, 8 PINS | typ 31.8 °C/W | 4 |
| Junction-to-board characterization parameter ψJB | LM3881, DGK, 8 PINS | typ 143.7 °C/W | 4 |
| Operating Quiescent Current IQ | TJ = –40°C to +125°C, VCC = 3.3 V; typical at TJ = 25°C | typ 80 · max 110 uA | 5 |
| FLAGx Leakage Current IFLAG | VFLAGx = 3.3 V; VCC = 3.3 V; typical at TJ = 25°C | typ 0.001 · max 1 uA | 5 |
| FLAGx Output Voltage Low VOL | IFLAGx = 1.2 mA; TJ = –40°C to +125°C, VCC = 3.3 V | max 0.4 V | 5 |
| TADJ Source Current ITADJ_SRC | TJ = –40°C to +125°C, VCC = 3.3 V; typical at TJ = 25°C | min 4 · typ 12 · max 20 uA | 5 |
| TADJ Sink Current ITADJ_SNK | TJ = –40°C to +125°C, VCC = 3.3 V; typical at TJ = 25°C | min 4 · typ 12 · max 20 uA | 5 |
| High Threshold Level VHTH | TJ = –40°C to +125°C, VCC = 3.3 V; typical at TJ = 25°C | min 1 · typ 1.22 · max 1.4 V | 5 |
| Low Threshold Level VLTH | TJ = –40°C to +125°C, VCC = 3.3 V; typical at TJ = 25°C | min 0.3 · typ 0.5 · max 0.7 V | 5 |
| Clock Cycle TCLK | CADJ = 10 nF; VCC = 3.3 V; typical at TJ = 25°C | typ 1.2 ms | 5 |
| Flag Time Delay TD1, TD4 | TJ = –40°C to +125°C, VCC = 3.3 V | min 9 · max 10 Clock cycles | 5 |
| Flag Time Delay TD2, TD3, TD5, TD6 | VCC = 3.3 V; typical at TJ = 25°C | typ 8 Clock cycles | 5 |
| EN Pin Threshold VEN | TJ = –40°C to +125°C, VCC = 3.3 V; typical at TJ = 25°C | min 1 · typ 1.22 · max 1.5 V | 5 |
| EN Pin Pullup Current IEN | VEN = 0 V; VCC = 3.3 V; typical at TJ = 25°C | typ 7 uA | 5 |
Pins, by the datasheet
8- 1 VCC
- Input Supply · p. 3
- 2 EN
- Precision Enable · p. 3
- 3 GND
- Ground · p. 3
- 4 INV
- Output Logic Invert · p. 3
- 5 TADJ
- Timer Adjust · p. 3
- 6 FLAG3
- Open-Drain Output 3 · p. 3
- 7 FLAG2
- Open-Drain Output 2 · p. 3
- 8 FLAG1
- Open-Drain Output 1 · p. 3
Ordering codes, by the datasheet
3- LM3881MM/NOPB
- VSSOP, DGK, 8 pins · Package quantity 1000; operating temperature -40 to 125 °C · p. 21
- LM3881MME/NOPB
- VSSOP, DGK, 8 pins · Package quantity 250; operating temperature -40 to 125 °C · p. 21
- LM3881MMX/NOPB
- VSSOP, DGK, 8 pins · Package quantity 3500; operating temperature -40 to 125 °C · p. 21
Parts like it
8TPS2391DGK
VSSOP-8-0.65mm-36V -40℃~+85℃@(Tj) -80V~-36V 1 1mA Active Low No No Open Drain Power Supervisor VSSOP-8-0.65mm Supervisor and Reset ICs ROHSTexas InstrumentsMonitors & Reset CircuitsTPS24701DGK
VSSOP-8-0.65mm-40℃~+85℃@(TA) 1 1.4mA 2.5V~18V Active Low Open-drain Voltage monitor VSSOP-8-0.65mm Surge Protection Devices (SPDs) ROHSTexas InstrumentsMonitors & Reset CircuitsTPS3620-33DGK
VSSOP-8-0.65mm-40℃~+85℃ 1 1.65V~5.5V 100ms 2.88V 40uA Active Low Backup Battery Switching No Open Drain Voltage Monitor Yes VSSOP-8-0.65mm Supervisor and Reset ICs ROHSTexas InstrumentsMonitors & Reset CircuitsTPS2390DGK
VSSOP-8-0.65mm-40℃~+85℃@(Tj) 1 No Open Drain Power Supervisor Yes VSSOP-8-0.65mm Supervisor and Reset ICs ROHSTexas InstrumentsMonitors & Reset CircuitsTPS2399DGK
VSSOP-8-0.65mm-40℃~+85℃@(Tj) -80V~-36V 1 1mA Active Low No Open Drain Power Supervisor Yes VSSOP-8-0.65mm Supervisor and Reset ICs ROHSTexas InstrumentsMonitors & Reset CircuitsTPS3306-15DGK
VSSOP-8-0.65mm-40℃~+85℃@(Ta) 1.4V、2.93V 100ms 2 Active Low No Open Drain Voltage Monitor Yes VSSOP-8-0.65mm Supervisor and Reset ICs ROHSTexas InstrumentsMonitors & Reset CircuitsTPS3306-18DGK
VSSOP-8-0.65mm-40℃~+85℃@(Tj) 1.68V、2.93V 100ms 2 Active Low No Open Drain Voltage Monitor Yes VSSOP-8-0.65mm Supervisor and Reset ICs ROHSTexas InstrumentsMonitors & Reset CircuitsTPS3306-18DGKG4
VSSOP-8-0.65mm-40℃~+85℃@(TA) 1.68V、2.93V 100ms 2 Active Low Open-drain Voltage monitor Watchdog timer VSSOP-8-0.65mm Supervisor and Reset ICs ROHSTexas InstrumentsMonitors & Reset Circuits
Questions
Is there a KiCad symbol and footprint for the LM3881MME?
Yes. The symbol is LM3881:LM3881 and the footprint Package_SO:VSSOP-8_3x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LM3881MME?
VSSOP-8-0.65mm, with 8 pins. Its footprint is drawn on this page.
Where is the LM3881MME datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the LM3881MME?
JLCPCB lists it as part C701875, with 0 in stock; the sellers' links on this page open their listings.
What can replace the LM3881MME?
Parts like it in the library: the TPS2391DGK by Texas Instruments, the TPS24701DGK by Texas Instruments, the TPS3620-33DGK by Texas Instruments and the TPS2390DGK by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.