Texas InstrumentsExtended
-40℃~+125℃ 1 1.6MHz 2.7V~5.5V 2.8A 3V~24V Built-in DC-DC Over-Temperature Protection (OTP)、Built-in soft-start PWM SEPIC、Boost WSON-6-EP(3x3) LED Drivers ROHS
The LM3410XSD is a LED Driver made by Texas Instruments in a WSON-6-EP(3x3) package with 7 pins. -40℃~+125℃ 1 1.6MHz 2.7V~5.5V 2.8A 3V~24V Built-in DC-DC Over-Temperature Protection (OTP)、Built-in soft-start PWM SEPIC、Boost WSON-6-EP(3x3) LED Drivers ROHS.
PCBKit's library has its KiCad symbol (Celestial_Driver_LED:TI LM3410XSD, from Altium's library) and its footprint (EasyEDA_Cloud:WDFN-6_L3.0-W3.0-P0.95-BL-EP, from EasyEDA), ready for a KiCad board. 298 are in stock at JLCPCB (part C2653371). 5 open-source boards in 4 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | PGND | Passive |
| 2 | VIN | Passive |
| 3 | DIM | Passive |
| 4 | FB | Passive |
| 5 | AGND | Passive |
| 6 | SW | Passive |
| 7 | DAP | Passive |
njeff/portaled
This is essentially a flashlight I designed because I wanted to use some free parts from TI. This uses the LM3410 driver to boost the voltage of the LiPo battery and drive the LEDs at a constant current.
Caraffa-git/LM3410X-Laser-Driver
Yet another CC laser diode driver based on LM3410X
njeff/portaled
This is essentially a flashlight I designed because I wanted to use some free parts from TI. This uses the LM3410 driver to boost the voltage of the LiPo battery and drive the LEDs at a constant current.
Yes. The symbol is Celestial_Driver_LED:TI LM3410XSD and the footprint EasyEDA_Cloud:WDFN-6_L3.0-W3.0-P0.95-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.
WSON-6-EP(3x3), with 7 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C2653371, with 298 in stock; the sellers' links on this page open their listings.
5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.