Skip to the content
123

LM340T-5.0

Texas Instruments

3-Terminal 5V 1A Positive Voltage Regulator

Part id
ti/LM340T-5.0
Category
Uncategorised
Package
TO-220
Pins
4
Used on
1 open-source board

Overview

The LM340T-5.0 is an uncategorised made by Texas Instruments in a TO-220 package with 3 pins. 3-Terminal 5V 1A Positive Voltage Regulator.

PCBKit's library has its KiCad symbol (Regulators:REG3 1IN-2GND-3OUT, from CERN's library) and its footprint (ICs And Semiconductors THD:TO-220-v, from CERN's library), ready for a KiCad board. 1 open-source board in 1 repository on GitHub use it.

Symbol

1IN2GND3OUT
Regulators:REG3 1IN-2GND-3OUTFrom CERN's library

Footprint

123
ICs And Semiconductors THD:TO-220-vFrom CERN's library

Pinout

3
The pins of the LM340T-5.0
PinNameType
1INInput
2GNDPower in
3OUTPower in

Open-source boards using it

1
  • 2 layers129.5 × 73.7 mmKlxecu v1, the printed circuit board in 3D

    Klxecu v1

    JourneyMan61/klxecu

    Speeduino based ECM for the fuel injected KLX 250 and 300

    75 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM340T-5.0?

Yes. The symbol is Regulators:REG3 1IN-2GND-3OUT and the footprint ICs And Semiconductors THD:TO-220-v, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM340T-5.0?

TO-220, with 3 pins. Its footprint is drawn on this page.

What can replace the LM340T-5.0?

Parts like it in the library: the MBR20200CT by luJing, the MBR20200CT by Cmos, the LM7815CT by Texas Instruments and the LT1084CT-5 by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM340T-5.0?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.