Skip to the content
1234

LM340MP-5.0

Texas InstrumentsExtended

0℃~+125℃ 1 1A 2V@(1A) 35V 40uV 5V 70dB@(120Hz) 8mA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LM340MP-5.0
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-223
Pins
4
In stock
0 at JLCPCB (C131990)
Used on
8 open-source boards

Overview

The LM340MP-5.0 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-223 package with 4 pins. 0℃~+125℃ 1 1A 2V@(1A) 35V 40uV 5V 70dB@(120Hz) 8mA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulators:REG3+1 1IN-2GND-3OUT+4GND, from CERN's library) and its footprint (Package_TO_SOT_SMD:SOT-223, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C131990). 8 open-source boards in 6 repositories on GitHub use it.

Symbol

1IN2GND4GND3OUT
Regulators:REG3+1 1IN-2GND-3OUT+4GNDFrom CERN's library

Footprint

1234
Package_TO_SOT_SMD:SOT-223From KiCad's library

Pinout

4
The pins of the LM340MP-5.0
PinNameType
1INInput
2GNDPower in
3OUTPower in
4GNDPower in

Open-source boards using it

8
  • 2 layers157.4 × 59 mmAvionicsBoard, the printed circuit board in 3D

    AvionicsBoard

    djmallek/CycloneRocketry

    Some work I do for CycloneRocketry

    85 parts1
  • 2 layers139 × 34 mmControllerBoardSMDPSU, the printed circuit board in 3D

    ControllerBoardSMDPSU

    Fredovsky/B13B-Nixie-clock

    Nixie clock made from F9057 Nixie tubes (B13B sockets).

    57 parts
  • 2 layers116.8 × 116.8 mmBentoboard, the printed circuit board in 3D

    Bentoboard

    torbers/bentoboard

    as many ready-to-use electronics as i could fit on a 4"x4" PCB.

    381 parts
  • 2 layers100 × 93 mmSpeeduino base, the printed circuit board in 3D

    Speeduino base

    Tjeerdie/SPECTRE

    Speeduino compatible engine control unit (ECU) based around black STM32F407VET6 board.

    161 parts59GPL-3.0
  • 2 layers70.7 × 78.1 mmPcb sensor, the printed circuit board in 3D

    Pcb sensor

    h4ctar/retro-gauge

    Open Source Motorcycle Tachometer

    26 parts3GPL-3.0
  • 2 layers145 × 118 mmM52, the printed circuit board in 3D

    M52

    rusefi/hw_legacy

    In this repo we archive rusEfi-related abandoned hardware files

    224 parts2
  • 2 layers118.7 × 184.1 mmTheHub, the printed circuit board in 3D

    TheHub

    djmallek/CycloneRocketry

    Some work I do for CycloneRocketry

    59 parts1
  • 2 layers118.7 × 129.5 mmTheHub, the printed circuit board in 3D

    TheHub

    djmallek/CycloneRocketry

    Some work I do for CycloneRocketry

    49 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM340MP-5.0?

Yes. The symbol is Regulators:REG3+1 1IN-2GND-3OUT+4GND and the footprint Package_TO_SOT_SMD:SOT-223, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM340MP-5.0?

SOT-223, with 4 pins. Its footprint is drawn on this page.

Where is the LM340MP-5.0 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM340MP-5.0?

JLCPCB lists it as part C131990, with 0 in stock; the sellers' links on this page open their listings.

What can replace the LM340MP-5.0?

Parts like it in the library: the AZ1117CH-5.0TRG1 by Diodes Incorporated, the LD1117-5.0 by UMW, the NCP1117ST50 by onsemi and the AZ1117H-5.0TRE1 by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM340MP-5.0?

8 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.