Skip to the content

LM2940IMP-9.0

Texas Instruments

9V 1A Low Dropout Positive Voltage Regulator

Part id
ti/LM2940IMP-9.0
Category
Uncategorised
Package
SOT223
Pins
4

Overview

The LM2940IMP-9.0 is an uncategorised made by Texas Instruments in a SOT223 package with 4 pins. 9V 1A Low Dropout Positive Voltage Regulator.

PCBKit's library has its KiCad symbol (Regulators:REG3+1 1IN-2GND-3OUT+4GND, from CERN's library) and its footprint (Package_TO_SOT_SMD:SOT-223, from KiCad's library), ready for a KiCad board.

Symbol

The library has no symbol for this part yet.

Footprint

The library has no footprint for this part yet.

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM2940IMP-9.0?

Yes. The symbol is Regulators:REG3+1 1IN-2GND-3OUT+4GND and the footprint Package_TO_SOT_SMD:SOT-223, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM2940IMP-9.0?

SOT223, with 4 pins. Its footprint is drawn on this page.

What can replace the LM2940IMP-9.0?

Parts like it in the library: the MSK1117-3.3V by MSKSEMI, the NCV1117ST33 by onsemi, the LD1117-1.8 by hongjiacheng and the MSK1117-5.0V by MSKSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.