Skip to the content
123

LM2940CT-5.0

Texas InstrumentsExtended

0℃~+125℃@(Ta) 1 150uVrms 1A 26V 30mA 500mV@(1A) 5V 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal Shutdown、Input undervoltage protection、Input overvoltage protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LM2940CT-5.0
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-220
Pins
4
In stock
3,273 at JLCPCB (C9413)
Used on
6 open-source boards

Overview

The LM2940CT-5.0 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a TO-220 package with 3 pins. 0℃~+125℃@(Ta) 1 150uVrms 1A 26V 30mA 500mV@(1A) 5V 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal Shutdown、Input undervoltage protection、Input overvoltage protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulators:REG3 1IN-2GND-3OUT, from CERN's library) and its footprint (ICs And Semiconductors THD:TO-220-v, from CERN's library), ready for a KiCad board. 3,273 are in stock at JLCPCB (part C9413). 6 open-source boards in 4 repositories on GitHub use it.

Symbol

1IN2GND3OUT
Regulators:REG3 1IN-2GND-3OUTFrom CERN's library

Footprint

123
ICs And Semiconductors THD:TO-220-vFrom CERN's library

Pinout

3
The pins of the LM2940CT-5.0
PinNameType
1INInput
2GNDPower in
3OUTPower in

Open-source boards using it

6
  • 4 layers250 × 160.1 mmSimdir, the printed circuit board in 3D

    Simdir

    rdos314/radio-zcu208

    Radio analysator based on ZCU208 evaluation board

    322 parts1
  • 2 layers100 × 100 mmBusino, the printed circuit board in 3D

    Busino

    waynegramlich/busino

    Arduino with a Bus

    65 parts
  • 4 layers44.5 × 39 mmLna, the printed circuit board in 3D

    Lna

    rdos314/radio-zcu208

    Radio analysator based on ZCU208 evaluation board

    26 parts1
  • 2 layers100 × 100 mmBusino, the printed circuit board in 3D

    Busino

    waynegramlich/busino

    Arduino with a Bus

    62 parts
  • 2 layersRealRobot, the printed circuit board in 3D

    RealRobot

    ZachWWalden/FundamentalsRobot

    Robot PCB for Oklahoma Christian University's Introductory E.C.E. Course, Fundamentals.

    55 partsGPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM2940CT-5.0?

Yes. The symbol is Regulators:REG3 1IN-2GND-3OUT and the footprint ICs And Semiconductors THD:TO-220-v, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM2940CT-5.0?

TO-220, with 3 pins. Its footprint is drawn on this page.

Where is the LM2940CT-5.0 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM2940CT-5.0?

JLCPCB lists it as part C9413, with 3,273 in stock; the sellers' links on this page open their listings.

What can replace the LM2940CT-5.0?

Parts like it in the library: the LM7805CT by Shanghai Siproin Microelectronics, the L7905CV-DG by STMicroelectronics, the LM7805CT by Texas Instruments and the LM7805CT by HGSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM2940CT-5.0?

6 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.